How to replace the wiper arm on Chevrolet Cobalt?

You need to turn the ignition on with the Wiper Switch in delay mode. When the wiper arms reach the bottom of their motion you need to turn off the ignition. To begin take off the Wiper Arm nut cover and Wiper Arm nut . Apply the Wiper Arm puller (J 39637) tool to take off the Wiper Arm from its position on the pivot shaft. Push the wiper arms onto the transmission shaft until their ends sit directly above the outline dots on the lower windshield blackout area. Fit the Wiper Arm nut by keeping the wiper blades in position to the windshield blackout dots tightening to 25 n.m (18 lb ft). After installing the wiper nut cover complete the test by starting the wipers to check their function and position.

OEM Chevrolet Cobalt Wiper Arm

Windshield Wiper Arm

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Wiper Arms found

View related parts
Chevrolet Cobalt Wiper Arm, Driver Side
Part Number: 15916783
Product Specifications
- Other Name: Arm-Windshield Wiper; Arm, Windshield Wiper Arm
- Position: Driver Side
- Replaces: 10377110
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2010 Chevrolet Cobalt | Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
View related parts
Chevrolet Cobalt Wiper Arm, Passenger Side
Part Number: 15916782
Product Specifications
- Other Name: Arm-Windshield Wiper; Arm, Windshield Wiper Arm
- Position: Passenger Side
- Replaces: 10377109
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2010 Chevrolet Cobalt | Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS

Chevrolet Cobalt Wiper Arm

Our website offers an extensive catalog of genuine Chevrolet Cobalt Wiper Arm at unbeatable prices. Every OEM Chevrolet Cobalt Wiper Arm comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet Cobalt Wiper Arm Parts Questions & Experts Answers

Wiper Arm, Passenger Side
15916782
Q: How to replace the wiper arm on Chevrolet Cobalt?
A: You need to turn the ignition on with the Wiper Switch in delay mode. When the wiper arms reach the bottom of their motion you need to turn off the ignition. To begin take off the Wiper Arm nut cover and Wiper Arm nut . Apply the Wiper Arm puller (J 39637) tool to take off the Wiper Arm from its position on the pivot shaft. Push the wiper arms onto the transmission shaft until their ends sit directly above the outline dots on the lower windshield blackout area. Fit the Wiper Arm nut by keeping the Wiper Blades in position to the windshield blackout dots tightening to 25 n.m (18 lb ft). After installing the wiper nut cover complete the test by starting the wipers to check their function and position.