Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2018-2020 Chevrolet Express 2500 | Base, LS, LT | 4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2018-2020 Chevrolet Express 2500 | Base, LS, LT | 4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS
Other Name: Shaft Assembly-Front Axle Propeller; Driveshaft; Shaft, Propeller
Position: Front
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2012-2014 Chevrolet Express 2500 | Base, LS, LT | 8 Cyl 4.8 L FLEX, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.6 L DIESEL
Chevrolet Express 2500 Drive Shaft
Our website offers an extensive catalog of genuine Chevrolet Express 2500 Drive Shaft at unbeatable prices. Every OEM Chevrolet Express 2500 Drive Shaft comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
Chevrolet Express 2500 Drive Shaft Parts Questions & Experts Answers
Q: How to replace a two-piece drive shaft on Chevrolet Express 2500?
A: A mechanic should begin the two-piece propeller shaft replacement process by using a lift to raise the vehicle before using safety stands to stabilize the propeller shaft. First remove the bolted center bearing from its bracket then proceed to take off the hanger bolts and hanger piece. The next step includes removing bolts as well as yoke retainers from the rear axle pinion yoke and disconnecting the propeller shaft from the rear axle pinion yoke. You should pull the propeller shaft backwards from transmission to remove it. First step for installation is to join the propeller shaft to the transmission followed by connecting the propeller shaft to the rear axle pinion yoke. Put bolts alongside yoke retainers on the rear axle pinion yoke before tightening the retainer bolts to 25 N.m (18 lb ft). Refit the propeller shaft hanger along with its bolts before securing them at 52 N.m (38 lb ft). The center bearing assembly must be fitted to the bracket before tightening the center bearing bolts to 40 N.m (30 lb ft). Trim the safety stand materials from the vehicle before lowering it to floor level.