How to replace the intermediate steering column seal on Chevrolet Express 3500?

To remove the intermediate steering shaft seal, strap the Steering Wheel in a straight ahead position with the Steering Column anti-rotation pin (J 42640), Steering Column lock, or strap to prevent rotation, recommended due to the possibility of damaging the sir system. Make sure the Steering Column, intermediate shaft(s), and steering gear are disconnected without any rotation of the Steering Wheel or movement of the front tires; otherwise, it will un-center the sir coil assembly. If there's an un-centered sir, then the sir coil special centering procedure should be followed. Start with the installation of the j 42640 into the Steering Column lower access hole, after that remove the intermediate shaft bearing and the intermediate shaft seal from intermediate shaft bearing . For installation you should put the intermediate shaft seal on the intermediate shaft bearing, reassemble the intermediate shaft bearing, and finally pull j 42640 from the Steering Column lower access hole.

OEM Chevrolet Express 3500 Steering Column Seal

Steering Column to Firewall Seal

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Steering Column Seals found

View related parts
Chevrolet Express 3500 Lower Seal
Part Number: 15898223
$15.62 MSRP: $29.34
You Save: $13.72 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Steering Shaft U Joint; Seal, Steering Column
- Position: Upper
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2008-2021 Chevrolet Express 3500 | Base, LS, LT | 4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS
View related parts
Chevrolet Express 3500 Boot
Part Number: 26062271
Product Specifications
- Other Name: Seal, Steering Column
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2002 Chevrolet Express 3500 | Base, LS | 6 Cyl 4.3 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS, 8 Cyl 8.1 L GAS
View related parts
Chevrolet Express 3500 Boot
Part Number: 26046610
Product Specifications
- Other Name: Seal; Seal, Steering Column
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996 Chevrolet Express 3500 | Base, LS | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS

Chevrolet Express 3500 Steering Column Seal

Our website offers an extensive catalog of genuine Chevrolet Express 3500 Steering Column Seal at unbeatable prices. Every OEM Chevrolet Express 3500 Steering Column Seal comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet Express 3500 Steering Column Seal Parts Questions & Experts Answers

Lower Seal
15898223
Q: How to replace the intermediate steering column seal on Chevrolet Express 3500?
A: To remove the intermediate steering shaft seal, strap the Steering Wheel in a straight ahead position with the Steering Column anti-rotation pin (J 42640), Steering Column lock, or strap to prevent rotation, recommended due to the possibility of damaging the sir system. Make sure the Steering Column, intermediate shaft(s), and steering gear are disconnected without any rotation of the Steering Wheel or movement of the front tires; otherwise, it will un-center the sir coil assembly. If there's an un-centered sir, then the sir coil special centering procedure should be followed. Start with the installation of the j 42640 into the Steering Column lower access hole, after that remove the intermediate shaft bearing and the intermediate shaft seal from intermediate shaft bearing . For installation you should put the intermediate shaft seal on the intermediate shaft bearing, reassemble the intermediate shaft bearing, and finally pull j 42640 from the Steering Column lower access hole.