How to service and repair the fuel filler hose on Chevrolet Impala?

The service and repair procedure of fuel filler hoses begins by releasing fuel system pressure while elevating the vehicle. Close all openings on the pipes with installation caps and plugs to avoid outside contaminants. The service requires you to loosen both Fuel Filler Hose clamps at the tank and fuel filler pipe before removing the hose. The fuel filler pipe service requires starting with screw removal on two different areas: first from the underbody then from the fuel filler pipe access panel. Lastly remove the fuel filler pipe. Begin fuel filler pipe installation through securing the attaching screws to the fuel filler pipe access panel while tightening them to 10 n.m (88 lb in). Put the attaching screw into position on the underbody before fully tightening it to 10 n.m (88 lb in). Complete the vapor recirculation line connection to the fuel filler pipe then attach the Fuel Filler Hose while tightening its clamps at the Fuel Tank and fuel filler pipe. Place the filler hose entirely onto the Fuel Tank port and fuel filler pipe while positioning the clamp correctly on tank port betweem bead and tank before tightening all Fuel Tank filler hose clamps to 2.5 n.m (22 lb in). After the battery connection, drop the car and secure the fuel cap before restoring the negative cable connection. A complete inspection for fuel leaks needs you to turn on the ignition for 2 seconds followed by 10 seconds of turning it off before turning it on again to check for fuel leakage.

How to replace the fuel filler hose on Chevrolet Impala?

The first step for replacing the Fuel Filler Hose involves cleaning both the fuel and evaporative emission (EVAP) connections and the surrounding area because contamination must be avoided. Drain the fuel system pressure and unscrew the fuel fill pipe screws which are located in the fuel filler pocket. The first step is to lift and suspend the vehicle and then take off the bolt from the fill pipe bracket which is attached to the underbody rail. Detachment of the evap line from the bracket and loosening the fuel fill pipe clamp at the Fuel Tank will allow fuel fill pipe hose removal from the Fuel Tank. The install process starts with detaching the fastener between the Fuel Tank vent pipe and the vent pipe followed by removing the Fuel Tank fill pipe. Installation of new components should start with placing the Fuel Tank fill pipe in position and then connecting the Fuel Tank fill pipe hose to the Fuel Tank. After fastening the vent pipe quick connect fitting onto the Fuel Tank vent pipe quick connect fitting you must tighten the fuel fill pipe clamp at the Fuel Tank to a torque value of 2.5 n.m (22 lb in). At first connect the evap line to its bracket and install the fill pipe bracket bolt on the underbody rail before tightening it to 13 n.m (115 lb in). End the sequence with lowering the vehicle and fastening the fuel fill pipe screws into the fuel filler pocket with 2.5 n.m (22 lb in) torque before you apply the intake manifold cover.

OEM Chevrolet Impala Fuel Filler Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

15 Fuel Filler Hoses found

View related parts
Chevrolet Impala Connector Hose Part Number: 10303675
$62.44 MSRP: $97.81
You Save: $35.37 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Fuel Tank Filler
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2008-2010 Chevrolet Impala | 50th Anniversary Edition, LS, LT, LTZ, Police, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Impala Connector Hose Part Number: 15221634
$32.63 MSRP: $111.12
You Save: $78.49 (71%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Fuel Tank Filler; Fuel Filler Hose; Fuel Hose; Filler Hose; Hose
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2005 Chevrolet Impala | Base, LS, LS Sport, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chevrolet Impala Connector Hose Part Number: 19179244
$64.82 MSRP: $97.77
You Save: $32.95 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Kit, Fuel Tank Filler
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2012-2013 Chevrolet Impala | LS, LT, LTZ, Police | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Impala Connector Hose Part Number: 19179207
$92.50 MSRP: $144.74
You Save: $52.24 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Kit, Fuel Tank Filler
- Replaces: 19152546
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2011-2013 Chevrolet Impala | LS, LT, LTZ, Police | 6 Cyl 3.5 L FLEX, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L FLEX
View related parts
Chevrolet Impala Filler Hose Part Number: 13319476
$26.35 MSRP: $41.23
You Save: $14.88 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Fuel Tank Filler; Fuel Filler Hose
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2020 Chevrolet Impala | Eco, LS, LT, LTZ, Premier | 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV), 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L GAS, 6 Cyl 3.6 L BI-FUEL, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Impala Filler Neck Part Number: 25839760
$283.09 MSRP: $423.15
You Save: $140.06 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly-Fuel Tank Filler (W/Filler Hose); Fuel Tank Filler Neck; Fuel Filler Hose; Filler Pipe; Pipe, Fuel Tank Filler
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2013 Chevrolet Impala | 50th Anniversary Edition, LS, LT, LTZ, Police, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Impala Filler Neck Part Number: 25839758
$252.60 MSRP: $377.59
You Save: $124.99 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly-Fuel Tank Filler (W/Filler Hose); Fuel Tank Filler Neck; Fuel Filler Hose; Filler Pipe; Pipe, Fuel Tank Filler
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2013 Chevrolet Impala | 50th Anniversary Edition, LS, LT, LTZ, Police, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Impala Filler Neck Part Number: 22944786
$281.83 MSRP: $421.26
You Save: $139.43 (34%)
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly-Fuel Tank Filler; Fuel Tank Filler Neck; Fuel Filler Hose; Filler Pipe; Pipe, Fuel Tank Filler
- Replaces: 20930018, 22757708, 22864113, 13236061
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2020 Chevrolet Impala | Eco, LS, LT, LTZ, Premier | 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV), 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L GAS, 6 Cyl 3.6 L BI-FUEL, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Impala Filler Neck Part Number: 22944785
$144.88 MSRP: $216.56
You Save: $71.68 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly-Fuel Tank Filler; Fuel Tank Filler Neck; Fuel Filler Hose; Filler Pipe; Pipe, Fuel Tank Filler
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2019 Chevrolet Impala | Eco, LS, LT, LTZ, Premier | 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV), 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L GAS, 6 Cyl 3.6 L BI-FUEL, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Impala Filler Hose Part Number: 13247493
Product Specifications
- Other Name: Hose, Fuel Tank Filler; Fuel Filler Hose
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2019 Chevrolet Impala | Eco, LS, LT, LTZ, Premier | 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV), 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L GAS, 6 Cyl 3.6 L BI-FUEL, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Impala Filler Neck Part Number: 10445233
Product Specifications
- Other Name: Pipe Assembly-Fuel Tank Filler; Fuel Tank Filler Neck; Fuel Filler Hose; Filler Pipe; Pipe, Fuel Tank Filler
- Replaces: 10290129
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2005 Chevrolet Impala | Base, LS, LS Sport, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chevrolet Impala Filler Pipe Part Number: 10265623
Product Specifications
- Other Name: Pipe Assembly-Fuel Tank Filler; Fuel Tank Filler Neck; Pipe; Pipe, Fuel Tank Filler
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-1996 Chevrolet Impala | SS | 8 Cyl 5.7 L GAS
View related parts
Chevrolet Impala Hose Part Number: 10228632
Product Specifications
- Other Name: Hose, Fuel Tank Filler; Fuel Hose
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-1996 Chevrolet Impala | SS | 8 Cyl 5.7 L GAS
View related parts
Chevrolet Impala Vent Hose Part Number: 10228630
Product Specifications
- Other Name: Hose, Evaporation Emission System (Fuel Tank End); Hose, Evaporation Emission System(Fuel Tank End)
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-1996 Chevrolet Impala | SS | 8 Cyl 5.7 L GAS
View related parts
Chevrolet Impala Filler Neck Part Number: 22944783
$170.43 MSRP: $254.75
You Save: $84.32 (34%)
Product Specifications
- Other Name: Pipe Assembly-Fuel Tank Filler; Fuel Tank Filler Neck; Fuel Filler Hose; Filler Pipe; Pipe, Fuel Tank Filler
- Replaces: 22757705, 22864110
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2020 Chevrolet Impala | Eco, LS, LT, LTZ, Premier | 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV), 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L GAS, 6 Cyl 3.6 L BI-FUEL, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS

Chevrolet Impala Fuel Filler Hose

Want to cut long-term maintenance and repair costs? Choose OEM Fuel Filler Hose. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Impala parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Impala Fuel Filler Hose includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

The Chevrolet Impala Fuel Filler Hose is one of the most effective parts in the current Chevrolet Impala models. This necessary part delivers fuel to the fuel tank, and security and durability of fittings clamps and screws are used here. The Chevrolet Impala, a full-sized sedan with popular options of a high-toned engine and new styling, has applied the Fuel Filler Hose across models to help both efficiency and safety when refuelling. This part is known as the Fuel Filler Hose and helps to reduce the dangers of spillage and provides performance efficiency at the same time. That way, it offered compatibility to multi Impala generations; hence, it played a crucial role in the Chevrolet alliance. In particular, the Fuel Feller Hose is unique on the automotive market because of it has the conditions of high durability and constant operational performance that are crucial for preserving the stability of the fuel system. The production of Chevrolet Impala from the first generation to the last generation brings out the role of such parts in offering enjoyable ride. As a part of the exterior and a component in operation of the Car, safety and efficiency oriented features of Chevrolet Impala Fuel Filler Hose adds value to the car's reliability and the Impala brand's position among cars that are trusted by people who prefer to drive rather than be passengers. To sum it all up, the Chevrolet Impala Fuel Filler Hose plays an easily distinguishable role of keeping the Impala reliably on the road for long, making it one of the most valuable car features.

Chevrolet Impala Fuel Filler Hose Parts and Q&A

Connector Hose
15221634
Q: How to service and repair the fuel filler hose on Chevrolet Impala?
A:
The service and repair procedure of fuel filler hoses begins by releasing fuel system pressure while elevating the vehicle. Close all openings on the pipes with installation caps and plugs to avoid outside contaminants. The service requires you to loosen both Fuel Filler Hose clamps at the tank and fuel filler pipe before removing the hose. The fuel filler pipe service requires starting with screw removal on two different areas: first from the underbody then from the fuel filler pipe access panel. Lastly remove the fuel filler pipe. Begin fuel filler pipe installation through securing the attaching screws to the fuel filler pipe access panel while tightening them to 10 n.m (88 lb in). Put the attaching screw into position on the underbody before fully tightening it to 10 n.m (88 lb in). Complete the vapor recirculation line connection to the fuel filler pipe then attach the Fuel Filler Hose while tightening its clamps at the Fuel Tank and fuel filler pipe. Place the filler hose entirely onto the Fuel Tank port and fuel filler pipe while positioning the clamp correctly on tank port betweem bead and tank before tightening all Fuel Tank filler hose clamps to 2.5 n.m (22 lb in). After the battery connection, drop the car and secure the fuel cap before restoring the negative cable connection. A complete inspection for fuel leaks needs you to turn on the ignition for 2 seconds followed by 10 seconds of turning it off before turning it on again to check for fuel leakage.
Filler Neck
25839758
Q: How to replace the fuel filler hose on Chevrolet Impala?
A:
The first step for replacing the Fuel Filler Hose involves cleaning both the fuel and evaporative emission (EVAP) connections and the surrounding area because contamination must be avoided. Drain the fuel system pressure and unscrew the fuel fill pipe screws which are located in the fuel filler pocket. The first step is to lift and suspend the vehicle and then take off the bolt from the fill pipe bracket which is attached to the underbody rail. Detachment of the evap line from the bracket and loosening the fuel fill pipe clamp at the Fuel Tank will allow fuel fill pipe hose removal from the Fuel Tank. The install process starts with detaching the fastener between the Fuel Tank vent pipe and the vent pipe followed by removing the Fuel Tank fill pipe. Installation of new components should start with placing the Fuel Tank fill pipe in position and then connecting the Fuel Tank fill pipe hose to the Fuel Tank. After fastening the vent pipe quick connect fitting onto the Fuel Tank vent pipe quick connect fitting you must tighten the fuel fill pipe clamp at the Fuel Tank to a torque value of 2.5 n.m (22 lb in). At first connect the evap line to its bracket and install the fill pipe bracket bolt on the underbody rail before tightening it to 13 n.m (115 lb in). End the sequence with lowering the vehicle and fastening the fuel fill pipe screws into the fuel filler pocket with 2.5 n.m (22 lb in) torque before you apply the intake manifold cover.