How to replace the Fuel Pressure Sensor (NU6) on Chevrolet Impala?

The replacement of Fuel Tank pressure sensor (NU6) requires completing the Fuel Tank replacement (NC7) procedure which eliminates the Fuel Tank. The technician should disconnect the wiring harness electrical connector which controls the Fuel Pressure Sensor. The operation of replacing the evaporative emission (EVAP) canister does not require its removal. A flat bladed tool should be used to gently extract the Fuel Pressure Sensor from its position in the evap canister. Before installing the Fuel Pressure Sensor into the evap canister apply a tiny drop of clean engine oil to its fuel pressure seal. To complete the installation connect the electrical Fuel Tank wiring harness onto the Fuel Pressure Sensor before putting back the Fuel Tank following the Fuel Tank replacement (NC7) procedure.

OEM Chevrolet Impala Fuel Pressure Sensor

Fuel Tank Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Fuel Pressure Sensors found

View related parts
Chevrolet Impala Fuel Pressure Regulator, Passenger Side
Part Number: 16238399
$49.19 MSRP: $101.06
You Save: $51.87 (52%)
ADD TO CART
Product Specifications
- Other Name: Sensor, Fuel Tank Pressure; Fuel Tank Pressure Sensor; Fuel Pressure Sensor; Pressure Regulator; Sensor, Early Fuel Evaporation; Fuel Gauge Sending Unit; Tank Pressure Sensor
- Position: Passenger Side
- Replaces: 12206740, 16217059, 16257276, 22678829, 09377680, 12219388, 16196060, 9377680
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2010 Chevrolet Impala | 50th Anniversary Edition, Base, LS, LS Sport, LT, LTZ, Police, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Impala Pressure Sensor, Passenger Side
Part Number: 13502903
$47.79 MSRP: $98.21
You Save: $50.42 (52%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Kit, Fuel Tank Meter/Pump; Fuel Tank Pressure Sensor; Level Sensor; Tank Pressure Sensor; Sensor; Sensor, Early Fuel Evaporation; Sensor, Fuel Tank Meter/Pump
- Position: Passenger Side
- Replaces: 13502510
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2008-2020 Chevrolet Impala | 50th Anniversary Edition, Eco, LS, LT, LTZ, Police, Premier, SS | 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV), 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L BI-FUEL, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L FLEX, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Impala Pressure Sensor
Part Number: 12668189
$48.40 MSRP: $98.30
You Save: $49.90 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Fuel Injection Fuel Rail Fuel Pressure; Fuel Tank Pressure Sensor; Fuel Pressure Sensor; Sensor, Computer Control Sensors
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2018-2020 Chevrolet Impala | LS, LT, Premier | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Impala Pressure Sensor
Part Number: 12635273
$63.97 MSRP: $129.92
You Save: $65.95 (51%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Fuel Injection Fuel Rail Fuel Pressure; Fuel Pressure Sensor; Sensor; Injector; Sensor, Computer Control Sensors
- Replaces: 12633417
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2012-2017 Chevrolet Impala | Eco, LS, LT, LTZ, Police, Premier | 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV), 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Impala Pressure Sensor
Part Number: 12627092
$92.39 MSRP: $187.68
You Save: $95.29 (51%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Fuel Injection Fuel Rail Fuel Pressure; Fuel Tank Pressure Sensor; Fuel Pressure Sensor; Sensor; Sensor, Computer Control Sensors
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2019 Chevrolet Impala | LS, LT, LTZ | 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L GAS
View related parts
Chevrolet Impala Pressure Sensor
Part Number: 92264695
$92.99 MSRP: $168.30
You Save: $75.31 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Computer Control Sensors; Fuel Tank Pressure Sensor; Fuel Pressure Sensor
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2015-2016 Chevrolet Impala | LS, LT | 6 Cyl 3.6 L BI-FUEL
View related parts
Chevrolet Impala Pressure Sensor
Part Number: 13516496
$47.65 MSRP: $96.80
You Save: $49.15 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Fuel Pressure; Fuel Tank Pressure Sensor; Fuel Pressure Sensor; Tank Pressure Sensor; Sensor, Computer Control Sensors; Sensor, Fuel Tank Meter/Pump
- Replaces: 13579380
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2020 Chevrolet Impala | LS, LT, LTZ, Premier | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS

Chevrolet Impala Fuel Pressure Sensor

Our website offers an extensive catalog of genuine Chevrolet Impala Fuel Pressure Sensor at unbeatable prices. Every OEM Chevrolet Impala Fuel Pressure Sensor comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet Impala Fuel Pressure Sensor Parts Questions & Experts Answers

Pressure Sensor, Passenger Side
13502903
Q: How to replace the Fuel Pressure Sensor (NU6) on Chevrolet Impala?
A: The replacement of Fuel Tank pressure sensor (NU6) requires completing the Fuel Tank replacement (NC7) procedure which eliminates the Fuel Tank. The technician should disconnect the wiring harness electrical connector which controls the Fuel Pressure Sensor. The operation of replacing the evaporative emission (EVAP) canister does not require its removal. A flat bladed tool should be used to gently extract the Fuel Pressure Sensor from its position in the evap canister. Before installing the Fuel Pressure Sensor into the evap canister apply a tiny drop of clean engine oil to its fuel pressure seal. To complete the installation connect the electrical Fuel Tank wiring harness onto the Fuel Pressure Sensor before putting back the Fuel Tank following the Fuel Tank replacement (NC7) procedure.