How to replace the Ignition Control Module on Chevrolet Impala?

Before replacing the Ignition Control Module start by disconnecting the negative Battery Cable and proceed with further steps. Extract the 14-way electrical connector which belongs to the Ignition Control Module (ICM). Before disconnection note the original positions of Spark Plug Wires connected to coil assemblies. Start by using a screwdriver to remove Ignition Coil screws then extract all ignition coils from their position at the icm. Next remove the Ignition Control Module from its bracket position. Jeep grand cherokee does the assembly in two steps: add the Ignition Control Module to its bracket first and then position the ignition coils on top of the Ignition Control Module. Seal the Ignition Coil screws into place using 4.5 n.m (40 lb in) torque. Attach the Spark Plug Wires followed by connecting the module to its 14-way electrical connector and tightening the screw to 2.1 n.m (19 lb in). After you have completed all steps reconnect the negative Battery Cable.

OEM Chevrolet Impala Ignition Control Module

Ignition Spark Control Module

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Ignition Control Modules found

View related parts
Chevrolet Impala Control Module Part Number: 10482803
$134.05 MSRP: $275.46
You Save: $141.41 (52%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module, Electronic Ignition Control (W/O Coil); Ignition Control Module; Ignition Module; ESC Control Module; Coil Module; Module
- Replaced by: 19435467
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996 Chevrolet Impala | SS | 8 Cyl 5.7 L GAS
View related parts
Chevrolet Impala Control Module Part Number: 19352932
$134.35 MSRP: $238.84
You Save: $104.49 (44%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module Assembly, Electronic Ignition Control (W/O Coil); Ignition Control Module; Ignition Module; Coil Module; Module, Distributor (Also Knock Sensor)
- Replaces: 10483139, 16191409
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-1995 Chevrolet Impala | SS | 8 Cyl 5.7 L GAS
View related parts
Chevrolet Impala Ignition Module Part Number: 19245558
$270.29 MSRP: $555.44
You Save: $285.15 (52%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module Assembly, Ignition Coil; Ignition Control Module; Engine Control Module; Coil Module; PCM; Module; ECM; Module, Distributor (Also Knock Sensor)
- Replaced by: 19435469
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2005 Chevrolet Impala | Base, LS, LS Sport, SS | 6 Cyl 3.8 L GAS
View related parts
Chevrolet Impala Control Module Part Number: 19245557
$221.80 MSRP: $455.78
You Save: $233.98 (52%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module Assembly, Electronic Ignition Control (W/O Coil); Ignition Control Module; Ignition Module; Coil Module; Module; Bracket, Distributor (Also Knock Sensor); Module, Distributor (Also Knock Sensor)
- Replaces: 10489422
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2005 Chevrolet Impala | Base | 6 Cyl 3.4 L GAS
View related parts
Chevrolet Impala Control Module Part Number: 16214691
Product Specifications
- Other Name: Module, Distributor (Also Knock Sensor); Ignition Control Module; ESC Control Module
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996 Chevrolet Impala | SS | 8 Cyl 5.7 L GAS
View related parts
Chevrolet Impala Control Module Part Number: 16214671
Product Specifications
- Other Name: Module, Distributor (Also Knock Sensor); Ignition Control Module; ESC Module; ESC Control Module
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996 Chevrolet Impala | SS | 8 Cyl 5.7 L GAS
View related parts
Chevrolet Impala Control Module Part Number: 16188309
Product Specifications
- Other Name: Module, Distributor (Also Knock Sensor); Ignition Control Module; ESC Control Module
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-1995 Chevrolet Impala | SS | 8 Cyl 5.7 L GAS
View related parts
Chevrolet Impala Ignition Module Part Number: 16038331
Product Specifications
- Other Name: Module, Distributor (Also Knock Sensor); Ignition Control Module; Distributor Rotor; ESC Control Module; Rotor
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1985 Chevrolet Impala | Base | 6 Cyl 4.3 L GAS

Chevrolet Impala Ignition Control Module

Want to cut long-term maintenance and repair costs? Choose OEM Ignition Control Module. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Impala parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Impala Ignition Control Module includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

Chevrolet Impala Ignition Control Module Parts Questions & Experts Answers

Control Module
19245557
Q: How to replace the Ignition Control Module on Chevrolet Impala?
A:
Before replacing the Ignition Control Module start by disconnecting the negative Battery Cable and proceed with further steps. Extract the 14-way electrical connector which belongs to the Ignition Control Module (ICM). Before disconnection note the original positions of Spark Plug Wires connected to coil assemblies. Start by using a screwdriver to remove Ignition Coil screws then extract all ignition coils from their position at the icm. Next remove the Ignition Control Module from its bracket position. Jeep grand cherokee does the assembly in two steps: add the Ignition Control Module to its bracket first and then position the ignition coils on top of the Ignition Control Module. Seal the Ignition Coil screws into place using 4.5 n.m (40 lb in) torque. Attach the Spark Plug Wires followed by connecting the module to its 14-way electrical connector and tightening the screw to 2.1 n.m (19 lb in). After you have completed all steps reconnect the negative Battery Cable.