How to replace the right exhaust manifold on Chevrolet Lumina?

The ground cable of the battery needs to be disconnected before procedure initiation. Rotate the engine forward after you remove the throttle body air inlet duct and engine mount struts. Remove the exhaust crossover pipe heat shield then unfasten the bolts which connect the right Exhaust Manifold to the crossover pipe. Before proceeding disconnect the heated Oxygen Sensor (H02S) wiring harness connector while simultaneously raising the vehicle. Remove the exhaust gas recirculation tube which connects to the rear manifold by disconnecting the three-way catalytic converter pipe from the right Exhaust Manifold. The following step involves removing both upper and lower heat shield bolts together with their heat shields. Lower the vehicle before removing the right Exhaust Manifold nuts and the manifold together with its gasket. The right Exhaust Manifold along with right Cylinder Head need to receive cleaning on their sealing areas. The removal of heated oxygen sensors must happen before changing out the manifold. The right Exhaust Manifold gasket and manifold installation requires the heated Oxygen Sensor as first step followed by the gasket then the manifold. Being done tighten right Exhaust Manifold nuts to a torque value of 16 nm (12 ft. Lbs.) before raising the vehicle a second time. Insert the lower heat shield first and secure its bolts at 10 nm (89 inch lbs.) before installing the upper heat shield assembly and torquing its bolts to a similar value of 10 nm (89 inch lbs.). Reinstall the EGR Tube on the rear manifold while connecting its three-way catalytic converter pipe to the right Exhaust Manifold. Lower the vehicle while connecting the wire harness of heated Oxygen Sensor (H02S) to its port. The installation of exhaust crossover pipe bolts should include the right Exhaust Manifold and the heat shield before returning the engine to its correct position. Afterward install the throttle body air inlet duct together with engine mount struts before reattaching the battery ground cable.

OEM Chevrolet Lumina Exhaust Manifold

Engine Exhaust Manifold

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

17 Exhaust Manifolds found

View related parts
Chevrolet Lumina Exhaust Manifold Part Number: 10101242
Product Specifications
- Other Name: Manifold, Engine Exhaust Manifold; Manifold
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1993 Chevrolet Lumina | Base | 4 Cyl 2.2 L GAS
View related parts
Chevrolet Lumina Exhaust Manifold, Driver Side Part Number: 24507155
Product Specifications
- Other Name: Manifold, Engine Exhaust Manifold; Manifold
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997 Chevrolet Lumina | LTZ | 6 Cyl 3.4 L GAS
View related parts
Chevrolet Lumina Exhaust Manifold, Passenger Side Part Number: 24507154
Product Specifications
- Other Name: Manifold, Engine Exhaust Manifold; Manifold
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997 Chevrolet Lumina | LTZ | 6 Cyl 3.4 L GAS
View related parts
Chevrolet Lumina Exhaust Manifold, Passenger Side Part Number: 24506309
Product Specifications
- Other Name: Manifold, Engine Exhaust Manifold; Manifold
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2001 Chevrolet Lumina | Base, LS, LTZ | 6 Cyl 3.1 L GAS
View related parts
Chevrolet Lumina Exhaust Manifold, Passenger Side Part Number: 24505129
Product Specifications
- Other Name: Manifold, Engine Exhaust Manifold; Manifold
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996 Chevrolet Lumina | LS | 6 Cyl 3.4 L GAS
View related parts
Chevrolet Lumina Exhaust Manifold, Driver Side Part Number: 24505127
Product Specifications
- Other Name: Manifold, Engine Exhaust Manifold; Manifold
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996 Chevrolet Lumina | LS | 6 Cyl 3.4 L GAS
View related parts
Chevrolet Lumina Exhaust Manifold, Driver Side Part Number: 24504379
Product Specifications
- Other Name: Manifold, Engine Exhaust Manifold; Manifold
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998-1999 Chevrolet Lumina | Base, LS, LTZ | 6 Cyl 3.8 L GAS
View related parts
Chevrolet Lumina Exhaust Manifold, Passenger Side Part Number: 24503918
Product Specifications
- Other Name: Manifold, Engine Exhaust Manifold; Manifold
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998-1999 Chevrolet Lumina | Base, LS, LTZ | 6 Cyl 3.8 L GAS
View related parts
Chevrolet Lumina Exhaust Manifold, Passenger Side Part Number: 14100552
Product Specifications
- Other Name: Manifold, Engine Exhaust Manifold; Manifold
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1990-1994 Chevrolet Lumina | Base, Euro | 6 Cyl 3.1 L FLEX, 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS
View related parts
Chevrolet Lumina Exhaust Manifold, Passenger Side Part Number: 14100514
Product Specifications
- Other Name: Manifold, Engine Exhaust Manifold; Manifold
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1993-1994, 1990-1991 Chevrolet Lumina | Base, Euro | 6 Cyl 3.1 L FLEX, 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS
View related parts
Chevrolet Lumina Exhaust Manifold, Driver Side Part Number: 14094803
Product Specifications
- Other Name: Manifold, Engine Exhaust Manifold; Manifold
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1990-1994 Chevrolet Lumina | Base, Euro | 6 Cyl 3.1 L FLEX, 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS
View related parts
Chevrolet Lumina Exhaust Manifold, Passenger Side Part Number: 10244605
Product Specifications
- Other Name: Manifold, Engine Exhaust Manifold; Manifold
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-1996 Chevrolet Lumina | Base, LS | 6 Cyl 3.1 L GAS
View related parts
Chevrolet Lumina Exhaust Manifold, Driver Side Part Number: 10182321
Product Specifications
- Other Name: Manifold, Engine Exhaust Manifold; Manifold
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-2001 Chevrolet Lumina | Base, LS, LTZ | 6 Cyl 3.1 L GAS
View related parts
Chevrolet Lumina Exhaust Manifold, Passenger Side Part Number: 10162004
Product Specifications
- Other Name: Manifold, Engine Exhaust Manifold; Manifold
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1991-1994 Chevrolet Lumina | Euro, Z34 | 6 Cyl 3.4 L GAS
View related parts
Chevrolet Lumina Exhaust Manifold, Passenger Side Part Number: 10162002
Product Specifications
- Other Name: Manifold, Engine Exhaust Manifold; Manifold
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1991-1995 Chevrolet Lumina | Euro, LS, Z34 | 6 Cyl 3.4 L GAS
View related parts
Chevrolet Lumina Exhaust Manifold, Driver Side Part Number: 10130991
Product Specifications
- Other Name: Manifold, Engine Exhaust Manifold; Manifold
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1991-1995 Chevrolet Lumina | Euro, LS, Z34 | 6 Cyl 3.4 L GAS
View related parts
Chevrolet Lumina Exhaust Manifold Part Number: 10066673
Product Specifications
- Other Name: Manifold, Engine Exhaust Manifold; Manifold
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1990-1992 Chevrolet Lumina | Base | 4 Cyl 2.5 L GAS

Chevrolet Lumina Exhaust Manifold

Want to cut long-term maintenance and repair costs? Choose OEM Exhaust Manifold. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Lumina parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Lumina Exhaust Manifold includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

It is recommended to find a Exhaust Manifold as it is a significant part of the car that represents dependability and power in the Lumina line that was manufactured from 1989 to 2013. This exhaust manifold has the responsibility of channeling hot exhaust gases from the engine to the exhaust system in a bid to promote general efficiency of the engine as well as in bid to cut down on emissions. Made out of cast iron or stainless steel material, the Exhaust Manifold comprises of multiple tubes to match the supplied engine's cylinders for ideal gas discharge. Its fitting is adjustable to the several models of Lumina and is suitable for all of the cars, including those with V6 engines. What makes Exhaust Manifold more than a trivial implement is the fact that it enhances the safety of the vehicle by eliminating, or reducing, exhaust leaks that are hazardous to human health. Notably, the boosting of exhaust gas velocity also contributes to better performance by the manifold to make Chevrolet Lumina as a suitable car brand to those people with driving needs. In the Exhaust Manifold the following special features are evident; the manifold has designed flow resistance in order to sustain the efficiency of the vehicle in the long-run. In conclusion, the Exhaust Manifold is one of the most preferred automobile parts in the market due to its reliability, efficiency, and safety; thus, reaffirming the Chevrolet Lumina model as a trusted midsize car.

Chevrolet Lumina Exhaust Manifold Parts Questions & Experts Answers

Exhaust Manifold, Passenger Side
24506309
Q: How to replace the right exhaust manifold on Chevrolet Lumina?
A:
The ground cable of the battery needs to be disconnected before procedure initiation. Rotate the engine forward after you remove the throttle body air inlet duct and engine mount struts. Remove the exhaust crossover pipe heat shield then unfasten the bolts which connect the right Exhaust Manifold to the crossover pipe. Before proceeding disconnect the heated Oxygen Sensor (H02S) wiring harness connector while simultaneously raising the vehicle. Remove the exhaust gas recirculation tube which connects to the rear manifold by disconnecting the three-way catalytic converter pipe from the right Exhaust Manifold. The following step involves removing both upper and lower heat shield bolts together with their heat shields. Lower the vehicle before removing the right Exhaust Manifold nuts and the manifold together with its gasket. The right Exhaust Manifold along with right Cylinder Head need to receive cleaning on their sealing areas. The removal of heated oxygen sensors must happen before changing out the manifold. The right Exhaust Manifold gasket and manifold installation requires the heated Oxygen Sensor as first step followed by the gasket then the manifold. Being done tighten right Exhaust Manifold nuts to a torque value of 16 nm (12 ft. Lbs.) before raising the vehicle a second time. Insert the lower heat shield first and secure its bolts at 10 nm (89 inch lbs.) before installing the upper heat shield assembly and torquing its bolts to a similar value of 10 nm (89 inch lbs.). Reinstall the EGR Tube on the rear manifold while connecting its three-way catalytic converter pipe to the right Exhaust Manifold. Lower the vehicle while connecting the wire harness of heated Oxygen Sensor (H02S) to its port. The installation of exhaust crossover pipe bolts should include the right Exhaust Manifold and the heat shield before returning the engine to its correct position. Afterward install the throttle body air inlet duct together with engine mount struts before reattaching the battery ground cable.