OEM Chevrolet Metro A/C Switch

Chevrolet Metro A/C Switch Parts Questions & Experts Answers

• Dash Control Unit
  30007398
  Q: How to replace the A/C Switch control assembly on Chevrolet Metro?

  A: Start the control assembly replacement process by first removing the radio coupled with the center console trim bezel. Seize the knobs from the heater control unit lever before extracting them. First remove the screw then extract the right-side instrument panel cluster lower cover before prying off the face plate and disconnecting the illumination lamp socket. Take out the air conditioning (A/C) switch then disconnect these cables from the heater case and blower case starting with the temperature control cable and continuing with the mode control cable and fresh/recirc control cable. Three components form the assembly: temperature control cable and mode control cable and fresh/recirc control cable. First empty the 2 screws holding the heater control unit before disconnecting the blower switch electrical connector. Move the heater control unit from its panel location through the radio opening after you detach the switch or leave it on the control unit. Begin heater installation by mounting the blower switch onto the heater control unit before attaching the heater control unit to the instrument panel. Reattach the blower motor electrical connector after using the 2 screws to secure the heater control unit . Position the temperature control cable first and add the mode control cable and fresh/recirc control cable and then install the A/C Switch. Mount the illumination lamp socket back to the heater face plate before fastening the instrument panel cluster lower cover with its screw. Install the heater control unit lever knobs together with the radio and center console trim bezel before adjusting both temperature mode cable and fresh/recirc control cable positions.