How to replace the Air Bag Sensor for the side impact on Chevrolet Monte Carlo?

The first step to replace the inflatable restraint side impact sensor requires disabling the SIR system. Secure the SIS on the inflatable restraint before applying power to the system to avoid both deployment and injury. Avoid striking or jolting the inflatable restraint side impact sensor (SIS). Begin by removing the left door trim panel then the optional water deflector and subsequent inner energy absorber pad. Start by working on the top clip that holds the outer energy absorber pad in place before gently moving it toward the outer door panel. Pull off the inflatable sensor fasteners then extract the discriminating sensor through the door impact beam mounting bracket. Use the disconnect tool to remove the wiring harness connector from the side impact sensor positioned on the inflatable restraint. Extract the sensor from inside the door. To install the side impact sensor begin by cleaning the mounting zone and positioning the sensor to its mounting bracket followed by yellow 2-way harness connection. Fasten the side impact sensor with its appropriate fasteners while maintaining a torque of 10 N.m (89 lb in) through hand-tool usage. Move the outer energy absorber pad toward the door panel exterior and clamp it using the supplied clip before placing the inner energy absorber pad. Reinstall the water deflector when necessary before you put back the left door trim panel. Finally, enable the SIR system.

OEM Chevrolet Monte Carlo Air Bag Sensor

Air Bag Impact Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Air Bag Sensors found

View related parts
Chevrolet Monte Carlo Side Impact Sensor
Part Number: 10346171
$4.68 MSRP: $27.27
You Save: $22.59 (83%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Inflatable Restraint System; Air Bag Sensor; Side Sensor
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005 Chevrolet Monte Carlo | LS, LT, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chevrolet Monte Carlo Front Impact Sensor
Part Number: 15250331
$265.00 MSRP: $396.20
You Save: $131.20 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Inflatable Restraint Front End Discriminating; Air Bag Sensor; Front Sensor; Sensor, Inflatable Restraint System
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2007 Chevrolet Monte Carlo | LS, LT, LTZ, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Monte Carlo Front Sensor
Part Number: 10346173
Product Specifications
- Other Name: Sensor Assembly-Inflatable Restraint Front End Discriminating; Air Bag Sensor; Sensor, Inflatable Restraint System
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005 Chevrolet Monte Carlo | LS, LT, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chevrolet Monte Carlo Side Impact Sensor
Part Number: 10328872
Product Specifications
- Other Name: Sensor, Inflatable Restraint System; Air Bag Sensor; Side Sensor
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004 Chevrolet Monte Carlo | LS, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chevrolet Monte Carlo Side Impact Sensor
Part Number: 10305726
Product Specifications
- Other Name: Sensor, Inflatable Restraint System; Air Bag Sensor; Side Sensor
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2001-2003 Chevrolet Monte Carlo | LS, LS Competition, LS Sport, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chevrolet Monte Carlo Front Sensor
Part Number: 10305724
Product Specifications
- Other Name: Sensor, Inflatable Restraint System; Air Bag Sensor
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2001-2004 Chevrolet Monte Carlo | LS, LS Competition, LS Sport, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS

Chevrolet Monte Carlo Air Bag Sensor

Our website offers an extensive catalog of genuine Chevrolet Monte Carlo Air Bag Sensor at unbeatable prices. Every OEM Chevrolet Monte Carlo Air Bag Sensor comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet Monte Carlo Air Bag Sensor Parts Questions & Experts Answers

Front Sensor
10346173
Q: How to replace the Air Bag Sensor for the side impact on Chevrolet Monte Carlo?
A: The first step to replace the inflatable restraint side impact sensor requires disabling the SIR system. Secure the SIS on the inflatable restraint before applying power to the system to avoid both deployment and injury. Avoid striking or jolting the inflatable restraint side impact sensor (SIS). Begin by removing the left door trim panel then the optional water deflector and subsequent inner energy absorber pad. Start by working on the top clip that holds the outer energy absorber pad in place before gently moving it toward the outer door panel. Pull off the inflatable sensor fasteners then extract the discriminating sensor through the door impact beam mounting bracket. Use the disconnect tool to remove the wiring harness connector from the side impact sensor positioned on the inflatable restraint. Extract the sensor from inside the door. To install the side impact sensor begin by cleaning the mounting zone and positioning the sensor to its mounting bracket followed by yellow 2-way harness connection. Fasten the side impact sensor with its appropriate fasteners while maintaining a torque of 10 N.m (89 lb in) through hand-tool usage. Move the outer energy absorber pad toward the door panel exterior and clamp it using the supplied clip before placing the inner energy absorber pad. Reinstall the water deflector when necessary before you put back the left door trim panel. Finally, enable the SIR system.