Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2000-2003 Chevrolet Monte Carlo | LS, LS Competition, LS Sport, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
Other Name: Tank; Coolant Reservoir; Outlet Assembly; Tank Kit, Radiator; Tank, Radiator
Replaces: 52487741, 89018359
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2000-2003 Chevrolet Monte Carlo | LS, LS Competition, LS Sport, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
Other Name: Tank, Radiator; Coolant Reservoir; Tank Assembly
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2000-2003 Chevrolet Monte Carlo | LS, LS Competition, LS Sport, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
Other Name: Reservoir, Engine Coolant Recovery; Coolant Reservoir
Replaces: 10346645
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2006-2007 Chevrolet Monte Carlo | SS | 8 Cyl 5.3 L GAS
Chevrolet Monte Carlo Coolant Reservoir
Our website offers an extensive catalog of genuine Chevrolet Monte Carlo Coolant Reservoir at unbeatable prices. Every OEM Chevrolet Monte Carlo Coolant Reservoir comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
Chevrolet Monte Carlo Coolant Reservoir Parts Questions & Experts Answers
Q: How to replace the coolant reservoir on Chevrolet Monte Carlo?
A: Start the replacement of the coolant recovery reservoir by removing the cross vehicle brace. You need to move the hose clamp (Hose Clamp) into position. Before installation disconnect the reservoir hose from the radiator overflow neck then release the coolant recovery reservoir nuts (Nuts) from shock tower studs. Drain the coolant into a clean container when you remove the coolant recovery reservoir (Reservoir) from its lower retention points on shock tower studs. To install the coolant recovery reservoir (Reservoir) position it on lower retainer and shock tower studs before tightening its coolant recovery reservoir nuts (Nuts) on shock tower studs to 3.3 nm (29 inch lbs.). Clean water lubricates the reservoir hose before installation of the Coolant Reservoir hose (Hose) to the radiator overflow neck fitting. Secure the reservoir hose to the radiator overflow fitting on the radiator filler neck so the hose end sits flat against the radiator filler neck while using the clamp (Hose Clamp) which faces the 11 o'clock point. Install the cross-vehicle brace afterward while keeping the coolant recovery reservoir at its proper fill level.