How to replace the rear brake caliper bracket on the 15/25 Series without NYS on Chevrolet Silverado 2500?

Start work on the rear Brake Caliper Bracket switch of the 15/25 series by lifting and holding the vehicle then removing the tire and wheel assembly. Secure the brake caliper with mechanic's wire or an equal protective method during replacement to avoid hurting the hydraulic brake hose and preventing brake fluid leaks. Extraction of the brake caliper from its position helps access the brake pads plus anti-rattle clips at the mounting bracket. Take off both Brake Caliper Bracket mounting bolts and the bracket then clean away any debris from inside the bracket and the mounting points. Reinstall the Brake Caliper Bracket and stay clear of its original adhesive patch by applying threadlocker gm p/n 12345493 (Canadian P/N 10953488) to the bolt threads after cleaning them with denatured alcohol. Put the two caliper bracket bolts into place and use 200 nm torque (148 ft. Lbs.) for jh5 cars or 300 nm torque (221 ft. Lbs.) for jh6/jh7 systems during installation. Reinstall the brake caliper after sliding brake pads against the rotor until contact is made and putting back anti-rattle clips. Put back the tire and wheel set. Set the vehicle down and without engine power gently push and release the Brake Pedal to 2/3 of its range. After waiting 15 seconds apply pushing pressure on the Brake Pedal three times to allow brake caliper pistons and brake pads to settle correctly.

OEM Chevrolet Silverado 2500 Brake Caliper Bracket

Caliper Bracket

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Brake Caliper Brackets found

View related parts
Chevrolet Silverado 2500 Caliper Bracket, Passenger Side Part Number: 25997055
$127.26 MSRP: $246.98
You Save: $119.72 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket Kit-Front Brake Caliper; Brake Caliper Bracket; Caliper Support; Bracket; Bracket Kit, Wheel Brake Cylinder/Caliper
- Position: Passenger Side
- Replaces: 18040094
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999-2004 Chevrolet Silverado 2500 | Base, LS, LT, WT | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS
View related parts
Chevrolet Silverado 2500 Caliper Bracket, Driver Side Part Number: 25997053
$142.64 MSRP: $255.84
You Save: $113.20 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket Kit-Front Brake Caliper; Brake Caliper Bracket; Caliper Support; Bracket; Bracket Kit, Wheel Brake Cylinder/Caliper
- Position: Driver Side
- Replaces: 18040093
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999-2004 Chevrolet Silverado 2500 | Base, LS, LT, WT | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS
View related parts
Chevrolet Silverado 2500 Caliper Bracket, Rear Part Number: 25997047
Product Specifications
- Other Name: Bracket Kit-Rear Brake Caliper; Brake Caliper Bracket; Mount Bracket; Caliper Mount; Caliper Support; Bracket; Bracket Kit, Wheel Brake Cylinder/Caliper
- Position: Rear
- Replaces: 18040099
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999-2004 Chevrolet Silverado 2500 | Base, LS, LT, WT | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS
View related parts
Chevrolet Silverado 2500 Caliper Bracket, Rear Part Number: 25997048
Product Specifications
- Other Name: Bracket Kit-Rear Brake Caliper; Brake Caliper Bracket; Mount Bracket; Caliper Mount; Caliper Support; Bracket; Bracket Kit, Wheel Brake Cylinder/Caliper
- Position: Rear
- Replaces: 18040098
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999-2004 Chevrolet Silverado 2500 | Base, LS, LT, WT | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS

Chevrolet Silverado 2500 Brake Caliper Bracket

Want to cut long-term maintenance and repair costs? Choose OEM Brake Caliper Bracket. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Silverado 2500 parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Silverado 2500 Brake Caliper Bracket includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

Chevrolet Silverado 2500 Brake Caliper Bracket Parts Questions & Experts Answers

Caliper Bracket, Driver Side
25997053
Q: How to replace the rear brake caliper bracket on the 15/25 Series without NYS on Chevrolet Silverado 2500?
A:
Start work on the rear Brake Caliper Bracket switch of the 15/25 series by lifting and holding the vehicle then removing the tire and wheel assembly. Secure the brake caliper with mechanic's wire or an equal protective method during replacement to avoid hurting the hydraulic brake hose and preventing brake fluid leaks. Extraction of the brake caliper from its position helps access the Brake Pads plus anti-rattle clips at the mounting bracket. Take off both Brake Caliper Bracket mounting bolts and the bracket then clean away any debris from inside the bracket and the mounting points. Reinstall the Brake Caliper Bracket and stay clear of its original adhesive patch by applying threadlocker gm p/n 12345493 (Canadian P/N 10953488) to the bolt threads after cleaning them with denatured alcohol. Put the two caliper bracket bolts into place and use 200 nm torque (148 ft. Lbs.) for jh5 cars or 300 nm torque (221 ft. Lbs.) for jh6/jh7 systems during installation. Reinstall the brake caliper after sliding brake pads against the rotor until contact is made and putting back anti-rattle clips. Put back the tire and wheel set. Set the vehicle down and without engine power gently push and release the Brake Pedal to 2/3 of its range. After waiting 15 seconds apply pushing pressure on the Brake Pedal three times to allow brake caliper pistons and brake pads to settle correctly.