How to replace the pickup box side emblem and side rear nameplate on Chevrolet Silverado 3500 Classic?

You should get ready by getting the proper tools before attempting to replace the pickup box side emblem and side rear nameplate. Using the heat gun J 25070 and the 3M(TM) scotch brite molding adhesive remover disk (3M(TM) P/N 07501). Before doing anything else, use tape to protect and line up the area the emblem covers. Keep the heat gun (J 25070) about 6 inches away from the pickup box and move it in a circular motion for thirty seconds. Gently use a plastic, flat-bladed tool to take off the emblem/nameplate, and use 3M(TM) P/N 07501 to get rid of all the adhesive on the emblem/nameplate and the pickup box surface. Wipe the pickup box surface with varnish makers and painters (VMP) naptha. If you don't see any mark for the emblem/nameplate, put tape in place as a guide. Heat the pickup box area with the heat gun (J 25070) so it reaches 70°F or more, without letting the heat touch the emblem/nameplate's adhesive. Take off the backing at the front of the emblem/nameplate and place it on the pickup box panel as you continue taking off the rest of the backing. Roll the emblem/nameplate back and forth using your hand to make sure it has adhered before you take off the surrounding tape.

OEM Chevrolet Silverado 3500 Classic Emblem

Badge

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Emblems found

View related parts
Chevrolet Silverado 3500 Classic Nameplate, Rear
Part Number: 15126056
$60.07 MSRP: $89.40
You Save: $29.33 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Plate, End Gate And Rear Door Decoration; Emblem, Radiator Grille And Front End Ornamentation
- Position: Rear
- Replaces: 15034749, 15053248, 15675118, 15982992, 15998983
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007 Chevrolet Silverado 3500 Classic | LS, LT, WT | 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
View related parts
Chevrolet Silverado 3500 Classic Nameplate, Outer
Part Number: 15036132
$57.32 MSRP: $85.32
You Save: $28.00 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Plate, Cab And Load Carrier Outer Side Decoration; Plate, Side Panel Wheel Opening; Body Side Lower Front; Fuel Door & Body Side; Pickup Box Side Lower
- Position: Outer
- Replaces: 15646974, 15705586
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007 Chevrolet Silverado 3500 Classic | LS, LT, WT | 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
View related parts
Chevrolet Silverado 3500 Classic Nameplate, Rear
Part Number: 84682637
$60.29 MSRP: $89.73
You Save: $29.44 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Plate, Rear End Panel And Tailgate; Plate Assembly, Emblem, Front and Rear Side Door, Hood Panel Ornamentation, Front Fender Name
- Position: Rear
- Replaces: 15767139, 22884136
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007 Chevrolet Silverado 3500 Classic | LS, LT, WT | 8 Cyl 6.6 L DIESEL
View related parts
Chevrolet Silverado 3500 Classic Nameplate
Part Number: 84674406
$52.96 MSRP: $78.83
You Save: $25.87 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Plate Assembly-End Gate Divider Name *Chrome; Emblem, End Gate And Rear Door Decoration; Plate, End Gate And Rear Door Decoration
- Replaces: 22884137, 15195869, 15029627
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007 Chevrolet Silverado 3500 Classic | LS, LT, WT | 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
View related parts
Chevrolet Silverado 3500 Classic Nameplate, Front
Part Number: 15268796
$47.16 MSRP: $70.20
You Save: $23.04 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Emblem, Front Side Door; Plate Assembly, Cab And Load Carrier Outer Side Decoration
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007 Chevrolet Silverado 3500 Classic | LS, LT, WT | 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
View related parts
Chevrolet Silverado 3500 Classic Emblem, Front
Part Number: 12335700
$80.11 MSRP: $119.24
You Save: $39.13 (33%)
Product Specifications
- Other Name: Emblem, Radiator Grille And Front End Ornamentation
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007 Chevrolet Silverado 3500 Classic | LS, LT, WT | 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
View related parts
Chevrolet Silverado 3500 Classic Nameplate, Outer
Part Number: 15126053
$57.99 MSRP: $86.32
You Save: $28.33 (33%)
Product Specifications
- Other Name: Plate, Cab And Load Carrier Outer Side Decoration; Plate Assembly, Cab And Load Carrier Outer Side Decoration
- Position: Outer
- Replaces: 15182305, 15707436
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007 Chevrolet Silverado 3500 Classic | LS, LT, WT | 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS

Chevrolet Silverado 3500 Classic Emblem

Our website offers an extensive catalog of genuine Chevrolet Silverado 3500 Classic Emblem at unbeatable prices. Every OEM Chevrolet Silverado 3500 Classic Emblem comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet Silverado 3500 Classic Emblem Parts Questions & Experts Answers

Nameplate, Outer
15036132
Q: How to replace the pickup box side emblem and side rear nameplate on Chevrolet Silverado 3500 Classic?
A: You should get ready by getting the proper tools before attempting to replace the pickup box side emblem and side rear nameplate. Using the heat gun J 25070 and the 3M(TM) scotch brite molding adhesive remover disk (3M(TM) P/N 07501). Before doing anything else, use tape to protect and line up the area the emblem covers. Keep the heat gun (J 25070) about 6 inches away from the pickup box and move it in a circular motion for thirty seconds. Gently use a plastic, flat-bladed tool to take off the emblem/nameplate, and use 3M(TM) P/N 07501 to get rid of all the adhesive on the emblem/nameplate and the pickup box surface. Wipe the pickup box surface with varnish makers and painters (VMP) naptha. If you don't see any mark for the emblem/nameplate, put tape in place as a guide. Heat the pickup box area with the heat gun (J 25070) so it reaches 70°F or more, without letting the heat touch the emblem/nameplate's adhesive. Take off the backing at the front of the emblem/nameplate and place it on the pickup box panel as you continue taking off the rest of the backing. Roll the emblem/nameplate back and forth using your hand to make sure it has adhered before you take off the surrounding tape.