Make sure this part fits

GM 84682637
Nameplate, Rear

2001-2022 GM

Customer Questions & Expert Answers (21)
GM 84682637 Nameplate, Rear
  • Part Description
    Plate, Rear End Panel And Tailgate
  • Position
    Rear
  • Replaces
    15767139, 22884136
  • Manufacturer
    General Motors
Make sure this part fits
$51.41 MSRP: $76.52
You Save: $25.11 (33%)
Ships in 1-3 Business Days
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    2017-2022 Chevrolet ColoradoLT, WT, Z71, ZR24 Cyl 2.8 L DIESEL
    2006-2022 Chevrolet Express 2500Base, LS, LT4 Cyl 2.8 L DIESEL, 8 Cyl 6.6 L DIESEL
    2006-2022 Chevrolet Express 3500Base, LS, LT4 Cyl 2.8 L DIESEL, 8 Cyl 6.6 L DIESEL
    2001-2007 Chevrolet Silverado 2500 HDBase, LS, LT, LTZ, WT8 Cyl 6.6 L DIESEL
    2007 Chevrolet Silverado 2500 HD ClassicLS, LT, WT8 Cyl 6.6 L DIESEL
    2001-2006 Chevrolet Silverado 3500Base, LS, LT, WT8 Cyl 6.6 L DIESEL
    2007 Chevrolet Silverado 3500 ClassicLS, LT, WT8 Cyl 6.6 L DIESEL
    2007 Chevrolet Silverado 3500 HDLT, LTZ, WT8 Cyl 6.6 L DIESEL
    2017-2022 GMC CanyonAll Terrain, AT4, Denali, Elevation, SLE, SLT4 Cyl 2.8 L DIESEL
    2006-2022 GMC Savana 2500Base, LS, LT4 Cyl 2.8 L DIESEL, 8 Cyl 6.6 L DIESEL
    View More
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is 84682637 compatible with my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 84682637 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How should the emblem/nameplate be heated for the 2008 Chevrolet Express 2500? Posted by Customer
    A:
    Use a heat gun (J 25070) positioned 152 mm (6.0 in) from the surface to heat it in a circular motion for about 30 seconds.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Emblem
    Q:
    What should be done if the body is below 19°C (66°F) for the 2008 Chevrolet Express 2500? Posted by Customer
    A:
    Warm the panel with the J 25070 while proceeding.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Emblem
    Q:
    What type of tape can be applied if necessary for the 2007 Chevrolet Express 2500? Posted by Customer
    A:
    A double-coated acrylic foam tape such as 3M(R) Super Automotive Attachment Tape or an equivalent.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Emblem
    Q:
    What tools are needed to replace the door emblem/nameplate for the 2006 Chevrolet Express 3500? Posted by Customer
    A:
    Heat Gun (J 25070) and 3M(TM) Scotch Brite Molding Adhesive Remover Disk (3M(TM) P/N 07501).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Emblem
    Q:
    What is the final step after applying the emblem/nameplate for the 2007 Chevrolet Express 2500? Posted by Customer
    A:
    Remove the tape from around the door emblem.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Emblem
    Q:
    How do you install the emblem/nameplate for the 2010 Chevrolet Express 3500? Posted by Customer
    A:
    Peel the backing from the adhesive tape, align the emblem/nameplate with the masking tape or magnetic strip, and firmly press it into place for 30 seconds to ensure proper adhesion before removing the masking tape or magnetic strip.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Emblem
    Q:
    How do you clean the affected panel for the 2009 Chevrolet Express 3500? Posted by Customer
    A:
    Clean the affected panel with soap and water, then dry it with a lint-free cloth.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Emblem
    Q:
    What should be done if the body temperature is below 19°C (66°F) for the 2010 Chevrolet Express 3500? Posted by Customer
    A:
    Warm the body panel with the J 25070.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Emblem
    Q:
    What is the first step to replace the front side door emblem/nameplate for the 2010 Chevrolet Express 2500? Posted by Customer
    A:
    Apply tape around the area for protection and alignment.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Emblem
    Q:
    How do you remove the emblem/nameplate after heating for the 2008 Chevrolet Express 3500? Posted by Customer
    A:
    Carefully peel the emblem/nameplate from the panel with a flat-bladed plastic tool.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Emblem
    Q:
    What should be done after applying the emblem/nameplate for the 2006 Chevrolet Silverado 3500? Posted by Customer
    A:
    Inspect the emblem/nameplate for bonding and remove the tape from the area around the endgate emblem.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Emblem
    Q:
    What should be done after warming the surface for the 2007 Chevrolet Silverado 3500 Classic? Posted by Customer
    A:
    Remove the backing from the front end of the emblem/nameplate and press it onto the pickup cab panel while continuing to remove the backing.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Emblem
    Q:
    What should be done to clean the pickup box surface for the 2007 Chevrolet Silverado 3500 Classic? Posted by Customer
    A:
    Clean it with varnish makers and painters (VMP) naptha.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Emblem
    Q:
    What should you do if the emblem/nameplate location is unmarked for the 2006 GMC Savana 2500? Posted by Customer
    A:
    Apply tape again.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Emblem
    Q:
    What should be done if the emblem/nameplate location is unmarked for the 2007 GMC Savana 2500? Posted by Customer
    A:
    Apply tape again to the location.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Emblem
    Q:
    What should you do after pressing the emblem/nameplate into place for the 2007 GMC Savana 2500? Posted by Customer
    A:
    Remove the masking tape or magnetic strip from the bodyside.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Emblem
    Q:
    How should the door panel surface and the back of the emblem/nameplate be cleaned for the 2010 GMC Savana 3500? Posted by Customer
    A:
    Use 3M(TM) Scotch Brite Molding Adhesive Remover Disk (3M(TM) P/N 07501) or an equivalent, then clean the door surface using varnish makers and painters (VMP) naptha.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Emblem
    Q:
    What should be done after removing the radiator grille for the 2007 GMC Savana 3500? Posted by Customer
    A:
    Take off the nuts that secure the emblem to the radiator grille.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Emblem
    Q:
    What is the final step after installing the emblem for the 2005 GMC Sierra 3500? Posted by Customer
    A:
    Reinstall the upper grille baffle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Emblem
    Q:
    What is the first step to replace the body side emblem/nameplate for the 2009 GMC Savana 3500? Posted by Customer
    A:
    Use a J 25070 Heat Gun to heat the emblem/nameplate, holding it approximately 152 mm (6 inches) from the surface for about 30 seconds in a circular motion.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Emblem
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Nameplate, Rear 84682637 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 84682637 Nameplate, Rear is available in the market under the name GM Emblem. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 84682637 Nameplate, Rear fits certain Chevrolet Colorado, Silverado 2500 HD, Express 2500 models, as well as GMC Canyon, Sierra 2500 HD, Savana 2500 models.
The original GM component designated by manufacturer part number 84682637 maintains top performance when functioning as the Plate, Rear End Panel And Tailgate unit at its Rear. The component 84682637 is constructed from durable material and its dimensions span 7.0 x 3.6 x 0.2 inches while weighing 0.30 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Plate Assembly, Emblem, Front and Rear Side Door, Hood Panel Ornamentation, Front Fender Name. The part 84682637 has available replacement options 15767139, 22884136. Each vehicle needs 2 units of the part marked as SKU 84682637. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.