First of all, to replace the
Blower Motor control processor in the hvac module, one has to remove the sound insulator panel if it is present. Pull off the connector from the Blower Motor and from Blower Motor control processor. Then, the retaining screws from the hvac module and the Blower Motor control processor are to be removed. To install, put the new Blower Motor control processor into the hvac module and secure it using retaining screws of 1.6 n.m (14 lb in). Once done with that, connect the electrical connector to the Blower Motor control processor and then connect the electrical connector at the Blower Motor. Lastly, if removed, redeploy the sound insulator panel.