Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 15763059
Heater Control

2002-2007 GM

Customer Questions & Expert Answers (37)
GM 15763059 Heater Control
GM 15763059 Heater Control
GM 15763059 Heater Control
GM 15763059 Heater Control
  • Part Description
    Control, Heater And Air Conditioner Control; Climate Control Module; Blower Control Switch
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • 2004 Chevy Silverado 2500 HD Heater Control Diagram for 15763059
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 15763059

  • Vehicle Fitment

    Year Make Model Trim Engine
    2003-2006 Cadillac EscaladeBase8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2003-2006 Cadillac Escalade ESVBase8 Cyl 6.0 L GAS
    2003-2006 Cadillac Escalade EXTBase8 Cyl 6.0 L GAS
    2002-2006 Chevrolet Avalanche 1500Base, LS, LT, North Face, On Road Edition, WBH, Z66, Z718 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2002-2006 Chevrolet Avalanche 2500Base, LS, LT8 Cyl 8.1 L GAS
    2003-2007 Chevrolet Silverado 1500Base, Hybrid, LS, LT, LTZ, SS, WT, Z71 Off-Road6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2007 Chevrolet Silverado 1500 ClassicLS, LT, SS, WT6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2005-2006, 2003 Chevrolet Silverado 1500 HDBase, LS, LT8 Cyl 6.0 L GAS
    2007 Chevrolet Silverado 1500 HD ClassicLT8 Cyl 6.0 L GAS
    2003-2004 Chevrolet Silverado 2500Base, LS, LT, WT8 Cyl 6.0 L GAS
    View More
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Is this 15763059 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 15763059 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to Replace an HVAC Control Module on Chevrolet Avalanche 2500? Posted by Customer
    A:
    To replace the HVC control module, first, take an instrument panel accessory trim plate and screws to secure the HVAC control module. Press the control assembly retaining tabs to remove the HVAC control module from the instrument panel, then disconnect the electrical connectors. For installation, plug electrical connectors into the HVAC control module, and reinstall it into the instrument panel with retaining tabs locking into position. Put the correct fasteners in their proper locations because replacement fasteners must be for the correct part number for the application. Do not use paints, lubricants or corrosion inhibitors on fasteners or their joint, as they may impact on torque and clamping force and may damage fasteners. Follow the correct tightening sequence and specifications to avoid parts and systems from getting damaged. Fasten the HVAC control module with screws to 1.9 N.m (17 lb in) and then reinstall the instrument panel accessory trim plate. Disruptions to the smoke control mechanisms may occur, as it is important not to calibrate any controls on the HVAC control module. Last but not least, start up the vehicle and let it run for a minute.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be done after removing the console from the headliner for the 2003 Cadillac Escalade? Posted by Customer
    A:
    Disconnect the electrical connectors from the console and remove the console from the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar A/C Switch
    Q:
    What should be done after removing the trim panel for the 2003 Cadillac Escalade? Posted by Customer
    A:
    Disconnect the electrical connectors (3,4) from the auxiliary HVAC control module and remove the screws securing it.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar A/C Switch
    Q:
    What should be done after securing the processor for the 2003 Cadillac Escalade? Posted by Customer
    A:
    Reconnect the electrical connector to the auxiliary blower motor processor and reinstall the right rear quarter trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar HVAC Control Module
    Q:
    What is the first step in the installation process for the 2004 Cadillac Escalade EXT? Posted by Customer
    A:
    Connect the electrical connector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Blower Control Switches
    Q:
    How do you remove the auxiliary HVAC control assembly for the 2004 Cadillac Escalade ESV? Posted by Customer
    A:
    Release the tabs at the rear and push it out from the rear, then disconnect the electrical connector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar A/C Switch
    Q:
    What should be done after removing the console for the 2004 Cadillac Escalade ESV? Posted by Customer
    A:
    Release the tabs at the rear of the overhead console to remove the auxiliary blower motor switch.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Blower Control Switches
    Q:
    What needs to be disconnected during the removal process for the 2005 Cadillac Escalade EXT? Posted by Customer
    A:
    The electrical connector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar A/C Switch
    Q:
    How do you remove the auxiliary HVAC control module for the 2006 Cadillac Escalade EXT? Posted by Customer
    A:
    Take out the auxiliary HVAC control module from the auxiliary HVAC module.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar HVAC Control Module
    Q:
    What should be done after removing the console for the 2006 Chevrolet Avalanche 2500? Posted by Customer
    A:
    Release the tabs at the rear of the overhead console to remove the auxiliary blower motor switch.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Blower Control Switches
    Q:
    What needs to be done to the HVAC control assembly for the 2003 Chevrolet Avalanche 1500? Posted by Customer
    A:
    Take out the screws securing it and carefully release the retaining tabs to pull the control head out.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar HVAC Control Module
    Q:
    What needs to be disconnected during the removal process for the 2003 Chevrolet Avalanche 1500? Posted by Customer
    A:
    The electrical connector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar A/C Switch
    Q:
    What should be done after attaching the HVAC control assembly to the console for the 2005 Chevrolet Avalanche 1500? Posted by Customer
    A:
    Reconnect the electrical connectors to the console.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar A/C Switch
    Q:
    What is the first step in the installation process for the 2003 Chevrolet Avalanche 1500? Posted by Customer
    A:
    Connect the electrical connector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Blower Control Switches
    Q:
    What is the first step to replace the HVAC control assembly for the rear auxiliary for the 2002 Chevrolet Avalanche 2500? Posted by Customer
    A:
    Separate the front of the console from the headliner.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar A/C Switch
    Q:
    What is the final step in the installation process for the 2003 Chevrolet Suburban 1500? Posted by Customer
    A:
    Reinstall the overhead console to the headliner.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Blower Control Switches
    Q:
    What is the first step to replace the HVAC control module for the 2006 Chevrolet Silverado 3500? Posted by Customer
    A:
    Remove the instrument panel accessory trim plate and the screws securing the HVAC control module.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar A/C Switch
    Q:
    What is the next step after removing the accessory switch assembly for the 2005 Chevrolet Silverado 1500? Posted by Customer
    A:
    Remove the screws from the HVAC control assembly and release the retaining tabs to pull the control head out of the instrument panel carrier.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar A/C Switch
    Q:
    What is the first step to replace the HVAC control processor for the 2006 Chevrolet Tahoe? Posted by Customer
    A:
    Remove the auxiliary rear HVAC control assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar HVAC Control Module
    Q:
    How do you detach the HVAC control module from the instrument panel for the 2004 Chevrolet Silverado 2500? Posted by Customer
    A:
    Depress the control assembly retaining tabs to detach the HVAC control module and then disconnect the electrical connectors.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar HVAC Control Module
    Q:
    What should be removed after the instrument cluster trim plate bezel for the 2004 Chevrolet Silverado 1500? Posted by Customer
    A:
    Remove the instrument panel storage tray and the accessory switch assembly from the instrument panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar HVAC Control Module
    Q:
    How do you install the new blower motor control processor for the 2006 Chevrolet Silverado 3500? Posted by Customer
    A:
    Place the new blower motor control processor into the HVAC module and secure it with the retaining screws, tightening them to 1.6 N.m (14 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar HVAC Control Module
    Q:
    What needs to be disconnected during the removal process for the 2004 Chevrolet Tahoe? Posted by Customer
    A:
    The electrical connector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Blower Control Switches
    Q:
    What should be done after removing the overhead console for the 2004 Chevrolet Tahoe? Posted by Customer
    A:
    Disconnect the electrical connectors from the auxiliary HVAC control module assembly and then remove the overhead console from the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar A/C Switch
    Q:
    What is the first step in the installation process for the 2005 GMC Sierra 3500? Posted by Customer
    A:
    Connect the electrical connectors to the HVAC control assembly, ensuring the key is in the off position for proper calibration.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar A/C Switch
    Q:
    How do you detach the HVAC control module from the instrument panel for the 2005 GMC Sierra 1500? Posted by Customer
    A:
    Depress the control assembly retaining tabs to detach the HVAC control module and then disconnect the electrical connectors.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar A/C Switch
    Q:
    What is the first step to replace the HVAC control assembly for the 2004 GMC Yukon XL 2500? Posted by Customer
    A:
    Begin by removing the console roof screw and then take out the console from the headliner.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar A/C Switch
    Q:
    What is the next step after removing the storage tray and switch assembly for the 2004 GMC Sierra 1500? Posted by Customer
    A:
    Remove the screws from the HVAC control assembly and release the retaining tabs to pull the control head out of the instrument panel carrier.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar HVAC Control Module
    Q:
    How do you begin the installation of the new auxiliary HVAC control processor for the 2004 GMC Yukon XL 2500? Posted by Customer
    A:
    Place the auxiliary HVAC control processor back into the box and reattach the cover.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar HVAC Control Module
    Q:
    What should be installed after connecting the electrical connectors for the 2006 GMC Yukon? Posted by Customer
    A:
    Install the HVAC control assembly, followed by the accessory switch assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar A/C Switch
    Q:
    What should be done after removing the console for the 2004 GMC Yukon XL 2500? Posted by Customer
    A:
    Release the tabs at the rear of the overhead console to remove the auxiliary blower motor switch.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Blower Control Switches
    Q:
    What should be done after securing the auxiliary HVAC control module for the 2004 GMC Yukon XL 2500? Posted by Customer
    A:
    Reconnect the electrical connectors (3,4) to the auxiliary HVAC control module and reinstall the right rear quarter trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar HVAC Control Module
    Q:
    What should be installed after connecting the electrical connectors for the 2006 GMC Sierra 3500? Posted by Customer
    A:
    Install the HVAC control assembly, followed by the accessory switch assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar HVAC Control Module
    Q:
    What is the first step to replace the auxiliary HVAC control module for the 2005 GMC Yukon? Posted by Customer
    A:
    First, remove the right rear quarter trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar HVAC Control Module
    Q:
    What is the first step in the installation process for the 2004 GMC Yukon? Posted by Customer
    A:
    Connect the electrical connector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Blower Control Switches
    Q:
    What is the first step to replace the HVAC control assembly for the 2004 GMC Yukon? Posted by Customer
    A:
    Begin by removing the overhead console screw and then detach the overhead console from the headliner.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar A/C Switch
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Heater Control 15763059 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 15763059 Heater Control is available in the market under the name GM A/C Switch, Blower Control Switches, HVAC Control Module. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 15763059 Heater Control fits certain Chevrolet Tahoe, Silverado 1500, Silverado 2500 HD models, as well as GMC Sierra 1500, Yukon, Sierra 2500 HD. Additionally, it is compatible with Cadillac Escalade, Escalade ESV, Escalade EXT models.
The original GM component designated by manufacturer part number 15763059 maintains top performance when functioning as the Control, Heater And Air Conditioner Control; Climate Control Module; Blower Control Switch unit. The component 15763059 is constructed from durable material and its dimensions span 11.6 x 4.8 x 4.8 inches while weighing 1.30 Pounds. The component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Dash Control Unit. The part 15763059 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.