To replace
HVAC Control Module, from the vehicle initially you will remove instrument panel accessory trim plate and screws that secure the HVAC Control Module. Press out the control assembly retaining tabs to release the HVAC Control Module from the instrument panel, followed by disconnecting the electrical connectors. For installation, attach the electrical connectors to the HVAC Control Module and have the key set at the off position to ensure proper calibration. Next, fit the HVAC Control Module back in the instrument panel with the retaining tabs engaging. Then, attach it using screws and tighten to 1.9 n.m (17 lb in). Finally reinstall the instrument panel accessory trim plate, and run the vehicle for one minute without touching the controls on the HVAC Control Module during calibration calib to prevent improper operation of hvac.