Make sure this part fits

GM 15112018
Heater Control

2003-2006 GM

Customer Questions & Expert Answers (23)
GM 15112018 Heater Control
  • Part Description
    Control, Auxiliary Heater & A/C; Climate Control Module; Blower Control Switch
  • Manufacturer
    General Motors
Make sure this part fits
$277.03
Ships in 1-2 Business Days
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    2003-2006 Cadillac EscaladeBase8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2003-2006 Cadillac Escalade ESVBase8 Cyl 6.0 L GAS
    2003-2006 Cadillac Escalade EXTBase8 Cyl 6.0 L GAS
    2003-2006 Chevrolet Avalanche 1500Base, LS, LT, North Face, On Road Edition, WBH, Z66, Z718 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2003-2006 Chevrolet Avalanche 2500Base, LS, LT8 Cyl 8.1 L GAS
    2003-2006 Chevrolet Silverado 1500Base, Hybrid, LS, LT, SS, WT, Z71 Off-Road6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2005-2006, 2003 Chevrolet Silverado 1500 HDBase, LS, LT8 Cyl 6.0 L GAS
    2003-2004 Chevrolet Silverado 2500Base, LS, LT, WT8 Cyl 6.0 L GAS
    2003-2006 Chevrolet Silverado 2500 HDBase, LS, LT, WT8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
    2003-2006 Chevrolet Silverado 3500Base, LS, LT, WT8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
    View More
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 15112018 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 15112018 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the first step to replace the auxiliary blower motor switch for the 2004 Cadillac Escalade ESV? Posted by Customer
    A:
    Remove the console from the headliner.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Blower Control Switches
    Q:
    What is the first step to service and repair the front auxiliary control assembly for the 2003 Cadillac Escalade? Posted by Customer
    A:
    Begin by removing the console roof screw and then take out the console from the headliner.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar A/C Switch
    Q:
    How do you install the auxiliary HVAC control module for the 2003 Cadillac Escalade? Posted by Customer
    A:
    Position the auxiliary HVAC control module onto the auxiliary HVAC module and secure it with screws, tightening them to 1.6 N.m (14 lb in) as per the Fastener Notice in Service Precautions.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar A/C Switch
    Q:
    What needs to be disconnected during the removal process for the 2005 Cadillac Escalade EXT? Posted by Customer
    A:
    The electrical connector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar A/C Switch
    Q:
    What should you do after connecting the electrical connector for the 2004 Cadillac Escalade ESV? Posted by Customer
    A:
    Install the auxiliary HVAC control assembly to the console.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar A/C Switch
    Q:
    What is the next step after connecting the electrical connector for the 2003 Chevrolet Avalanche 1500? Posted by Customer
    A:
    Install the auxiliary HVAC control assembly back into the console.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar A/C Switch
    Q:
    What needs to be disconnected during the removal process for the 2003 Chevrolet Avalanche 1500? Posted by Customer
    A:
    The electrical connector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Blower Control Switches
    Q:
    What is the first step to replace the HVAC control assembly for the front auxiliary for the 2005 Chevrolet Avalanche 1500? Posted by Customer
    A:
    Begin by removing the console roof screw and then take out the console from the headliner.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar A/C Switch
    Q:
    What is the first step in the installation process for the 2006 Chevrolet Avalanche 2500? Posted by Customer
    A:
    Connect the electrical connector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Blower Control Switches
    Q:
    What should be removed after the instrument panel storage tray for the 2005 Chevrolet Silverado 1500? Posted by Customer
    A:
    Remove the accessory switch assembly from the instrument panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar A/C Switch
    Q:
    What should be done after connecting the electrical connector for the 2004 Chevrolet Tahoe? Posted by Customer
    A:
    Install the blower motor switch back into the overhead console.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Blower Control Switches
    Q:
    What should be done after removing the overhead console for the 2004 Chevrolet Tahoe? Posted by Customer
    A:
    Disconnect the electrical connectors from the auxiliary HVAC control module assembly and then remove the overhead console from the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar A/C Switch
    Q:
    What needs to be disconnected during the removal process for the 2004 Cadillac Escalade EXT? Posted by Customer
    A:
    The electrical connector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Blower Control Switches
    Q:
    What is the first step to replace the auxiliary blower motor switch for the 2003 Chevrolet Suburban 1500? Posted by Customer
    A:
    Remove the console from the headliner.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Blower Control Switches
    Q:
    What should you do for installation of the new HVAC control module for the 2006 Chevrolet Silverado 3500? Posted by Customer
    A:
    Connect the electrical connectors to the HVAC control module, ensuring the Key is in the off position for proper calibration.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar A/C Switch
    Q:
    What is the final step after installing the HVAC control module for the 2005 GMC Sierra 1500? Posted by Customer
    A:
    Reinstall the instrument panel accessory trim plate, start the vehicle, and let it run for one minute without adjusting any controls on the HVAC control module during calibration.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar A/C Switch
    Q:
    What is the next step after removing the overhead console for the 2004 GMC Yukon? Posted by Customer
    A:
    Remove the auxiliary HVAC control assembly from the overhead console.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar A/C Switch
    Q:
    What is the first step to replace the HVAC control module for the 2005 GMC Sierra 3500? Posted by Customer
    A:
    Begin by removing the instrument cluster trim plate bezel and the instrument panel storage tray.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar A/C Switch
    Q:
    How do you detach the HVAC control assembly from the console for the 2004 GMC Yukon XL 2500? Posted by Customer
    A:
    Depress the 4 tabs located on the back of the HVAC control assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar A/C Switch
    Q:
    What should be done after removing the console for the 2004 GMC Yukon XL 2500? Posted by Customer
    A:
    Release the tabs at the rear of the overhead console to remove the auxiliary blower motor switch.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Blower Control Switches
    Q:
    What should be removed after the instrument panel storage tray for the 2006 GMC Yukon? Posted by Customer
    A:
    Remove the accessory switch assembly from the instrument panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar A/C Switch
    Q:
    What should be done after connecting the electrical connector for the 2004 GMC Yukon? Posted by Customer
    A:
    Install the blower motor switch back into the overhead console.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Blower Control Switches
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Heater Control 15112018 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 15112018 Heater Control is available in the market under the name GM A/C Switch, Blower Control Switches. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 15112018 Heater Control fits certain Chevrolet Tahoe, Silverado 1500, Silverado 2500 HD models, as well as GMC Sierra 1500, Yukon, Sierra 2500 HD. Additionally, it is compatible with Cadillac Escalade, Escalade ESV, Escalade EXT models.
The original GM component designated by manufacturer part number 15112018 maintains top performance when functioning as the Control, Auxiliary Heater & A/C; Climate Control Module; Blower Control Switch unit. The component 15112018 is constructed from durable material and its dimensions span 10.3 x 6.5 x 3.4 inches while weighing 0.70 Pounds. The component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Heater & A/C Control. The part 15112018 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.