Other Name: Tube, Air Conditioner Blower Motor Cooling; A/C Refrigerant Liquid Hose; A/C Hose; Tube, A/C Blower Motor Cooling; Tube, Heater Motor Cooling; Tube, Heater Blower Motor
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2000-2006 Chevrolet Suburban 2500 | Base, LS, LT | 8 Cyl 6.0 L GAS, 8 Cyl 8.1 L GAS
Other Name: Hose Assembly-A/C Condenser; A/C Refrigerant Liquid Hose; A/C Hoses; Hose & Tube Assembly; Front A/C Hose
Replaced by: 15873053
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2003-2005 Chevrolet Suburban 2500 | LS, LT | 8 Cyl 6.0 L GAS, 8 Cyl 8.1 L GAS
| Page 1 of 2 |Next >
1-20 of 29 Results
Chevrolet Suburban 2500 A/C Hose
Our website offers an extensive catalog of genuine Chevrolet Suburban 2500 A/C Hose at unbeatable prices. Every OEM Chevrolet Suburban 2500 A/C Hose comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
Chevrolet Suburban 2500 A/C Hose Parts Questions & Experts Answers
Q: How Should the A/C Hose and Heater Pipes Be Serviced and Repaired Using the J 41425 A/C Line Repair Kit on Chevrolet Suburban 2500?
A: When repairing damages on heater and A/C pipes, use the J 41425 A/C Line Repair Kit (J 41425) to repair the rear A/C or heater lines through sectional techniques rather than complete unit replacements. Section lines properly by keeping the correct minimum length present in both sections of straight parts extending from the splice during the line-cutting process. During A/C line work recover the refrigerant while heater line work requires draining the coolant and then support the lifted vehicle. When repairing lines cut away and discard the damaged piece followed by removing the old line down to its original length. Ends of the lines need cleaning through usage of the J 41425 (J 41425) cleaning pad prior to LOK prep sealant application. Your task is to place a single drop of J 41425-3 sealing compound (J 41425-3) onto each line end before inserting them into the LOK fitting and performing fitting rotation for compound distribution. Use the J 41425-1 tool (J 41425-1) equipped with appropriate LOK fitting jaws to tighten the forcing screw until the connector collars reach the LOK fitting's central section through body contact with the 3/8" breaker bar and tool body installation. Verify the installation then lower the vehicle while filling the coolant reservoir and perform a recharge station test if repairing A/C lines. When repairing line sections refer to the same steps but include staggered splicing when repairing multiple lines while keeping the substitution lines identical.