How to replace the tie rod on Chevrolet Suburban 2500?

The vehicle lifting process starts before Tie Rod replacement. You can separate all ball joints and tie rods simultaneously by using universal steering linkage puller (J24319-B). The outer Tie Rod ball stud removal begins with unfastening its nut followed by using the universal steering linkage puller (J24319-B) to detach the ball stud from the knuckle structure. Do not reuse the nut. The next stage requires two actions: first loosen the Tie Rod End jam nut then remove the Tie Rod End from its shaft positioning and finally remove the outer Tie Rod End from the relay rod. Place a torsion on the shaft to verify no bent threads and then thoroughly clean the tapered surface of the Steering Knuckle. When installing the Tie Rod assembly spread chassis lubricant on the threads before applying the Tie Rod End to the shaft and the outer rod ball stud to the Steering Knuckle . Install the outer Tie Rod ball stud through the use of the steering linkage installer-12 mm (J29193) tool before tightening it to 54 nm (40 ft. Lbs.) to properly seat the tapers. Fasten the new prevailing torque nut to the outer rod ball stud through a proper torque of 45 nm (33 ft. Lbs.). The front toe adjustment process must be followed before tightening the jam nut up to 68 nm (50 ft. Lbs.).

OEM Chevrolet Suburban 2500 Tie Rod

Steering Tie Rod

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

11 Tie Rods found

View related parts
Chevrolet Suburban 2500 Inner Tie Rod
Part Number: 26059210
$44.86 MSRP: $64.20
You Save: $19.34 (31%)
ADD TO CART
Product Specifications
- Other Name: F-Rod; Steering Tie Rod End; Outer Tie Rod End; Tie Rod End
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2006 Chevrolet Suburban 2500 | Base, LS, LT | 8 Cyl 6.0 L GAS, 8 Cyl 8.1 L GAS
View related parts
Chevrolet Suburban 2500 Outer Tie Rod
Part Number: 19149617
$80.87 MSRP: $132.39
You Save: $51.52 (39%)
ADD TO CART
Product Specifications
- Other Name: Rod Kit, Steering Linkage Outer Tie; Steering Tie Rod End; Outer Tie Rod End; Tie Rod End; Rod Kit, Steering Tie Rod Outer
- Position: Outer
- Replaces: 12471376
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006, 2000 Chevrolet Suburban 2500 | Base, LS, LT | 8 Cyl 6.0 L GAS, 8 Cyl 8.1 L GAS
View related parts
Chevrolet Suburban 2500 Outer Tie Rod
Part Number: 15254061
$109.31 MSRP: $186.10
You Save: $76.79 (42%)
ADD TO CART
Product Specifications
- Other Name: Rod Kit, Steering Linkage Outer Tie; Steering Tie Rod End; Outer Tie Rod End; Tie Rod End; Rod Kit, Steering Tie Rod Outer
- Position: Outer
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2013 Chevrolet Suburban 2500 | LS, LT, LTZ | 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS
View related parts
Chevrolet Suburban 2500 Inner Tie Rod
Part Number: 15295861
$95.33 MSRP: $156.05
You Save: $60.72 (39%)
ADD TO CART
Product Specifications
- Other Name: Rod Kit, Steering Linkage Inner Tie; Steering Tie Rod End; Outer Tie Rod End; Tie Rod End; Rod Kit, Steering Tie Rod Inner
- Position: Inner
- Replaced by: 19435545
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2013 Chevrolet Suburban 2500 | LS, LT, LTZ | 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS
View related parts
Chevrolet Suburban 2500 Outer Tie Rod
Part Number: 19352244
$63.29 MSRP: $154.42
You Save: $91.13 (60%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rod Assembly, Steering Linkage Outer Tie; Steering Tie Rod End; Outer Tie Rod End; Tie Rod End
- Position: Outer
- Replaced by: 85819772
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2013 Chevrolet Suburban 2500 | Base, LS, LT, LTZ | 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 8.1 L GAS
View related parts
Chevrolet Suburban 2500 Inner Tie Rod
Part Number: 19178561
$74.28 MSRP: $126.46
You Save: $52.18 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rod Kit, Steering Linkage Inner Tie; Steering Tie Rod End; Steering Tie Rod; Tie Rod End; Rod Kit, Steering Tie Rod Inner
- Position: Inner
- Replaces: 15254060
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2013 Chevrolet Suburban 2500 | LS, LT, LTZ | 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS
View related parts
Chevrolet Suburban 2500 Outer Tie Rod, Rear
Part Number: 26091587
$88.68 MSRP: $145.17
You Save: $56.49 (39%)
ADD TO CART
Product Specifications
- Other Name: Rod Kit, Rear Wheel Steering Linkage Outer Tie; Steering Tie Rod End; Outer Tie Rod End; Tie Rod End; Rod Kit, Steering Tie Rod Outer
- Position: Rear Outer
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2004 Chevrolet Suburban 2500 | LS, LT | 8 Cyl 6.0 L GAS, 8 Cyl 8.1 L GAS
View related parts
Chevrolet Suburban 2500 Outer Tie Rod
Part Number: 26076544
Product Specifications
- Other Name: Rod Kit, Steering Linkage Outer Tie; Steering Tie Rod End; Outer Tie Rod End; Tie Rod End; Rod Kit, Steering Tie Rod Outer
- Position: Outer
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2005 Chevrolet Suburban 2500 | Base, LS, LT | 8 Cyl 6.0 L GAS, 8 Cyl 8.1 L GAS
View related parts
Chevrolet Suburban 2500 Inner Tie Rod
Part Number: 19152329
Product Specifications
- Other Name: Rod Kit, Steering Linkage Inner Tie; Steering Tie Rod End; Tie Rod End; Rod Kit, Steering Tie Rod Inner
- Position: Inner
- Replaces: 26079801, 26076543
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2006 Chevrolet Suburban 2500 | Base, LS, LT | 8 Cyl 6.0 L GAS, 8 Cyl 8.1 L GAS
View related parts
Chevrolet Suburban 2500 Inner Tie Rod
Part Number: 26091588
Product Specifications
- Other Name: Rod Kit, Steering Tie Rod Inner; Steering Tie Rod End; Tie Rod End
- Position: Inner
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2004 Chevrolet Suburban 2500 | LS, LT | 8 Cyl 6.0 L GAS, 8 Cyl 8.1 L GAS
View related parts
Chevrolet Suburban 2500 Center Link
Part Number: 12471385
Product Specifications
- Other Name: Rod Kit, Steering Connecting; Steering Tie Rod End; Drag Link
- Position: Inner
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000 Chevrolet Suburban 2500 | Base, LS, LT | 8 Cyl 6.0 L GAS

Chevrolet Suburban 2500 Tie Rod

Our website offers an extensive catalog of genuine Chevrolet Suburban 2500 Tie Rod at unbeatable prices. Every OEM Chevrolet Suburban 2500 Tie Rod comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet Suburban 2500 Tie Rod Parts Questions & Experts Answers

Inner Tie Rod
26059210
Q: How to replace the tie rod on Chevrolet Suburban 2500?
A: The vehicle lifting process starts before Tie Rod replacement. You can separate all Ball Joints and tie rods simultaneously by using universal steering linkage puller (J24319-B). The outer Tie Rod ball stud removal begins with unfastening its nut followed by using the universal steering linkage puller (J24319-B) to detach the ball stud from the knuckle structure. Do not reuse the nut. The next stage requires two actions: first loosen the Tie Rod End jam nut then remove the Tie Rod End from its shaft positioning and finally remove the outer Tie Rod End from the relay rod. Place a torsion on the shaft to verify no bent threads and then thoroughly clean the tapered surface of the Steering Knuckle. When installing the Tie Rod assembly spread chassis lubricant on the threads before applying the Tie Rod End to the shaft and the outer rod ball stud to the Steering Knuckle . Install the outer Tie Rod ball stud through the use of the steering linkage installer-12 mm (J29193) tool before tightening it to 54 nm (40 ft. Lbs.) to properly seat the tapers. Fasten the new prevailing torque nut to the outer rod ball stud through a proper torque of 45 nm (33 ft. Lbs.). The front toe adjustment process must be followed before tightening the jam nut up to 68 nm (50 ft. Lbs.).

Related Chevrolet Suburban 2500 Parts

Browse Chevrolet Suburban 2500 Tie Rod by Years

2013 2012 2011 2010 2009 2008 2007 2006 2005 2004 2003 2002 2001 2000