How to replace the lower control arm ball joint on cast iron lower control arms on Chevrolet Tahoe?

You need to lift and stabilize the vehicle before removing the tire and wheel assembly to change the Ball Joint in lower control arms made of cast iron. You must lift and support the vehicle before taking out the lower Control Arm. Fix the Control Arm in a holding device while you use a cutting tool to take off the holding wires from the Ball Joint housing. Place the Ball Joint in the press to take it out from the lower Control Arm. Place the outer flange of the new Ball Joint against the joint before installing it into position. Secure the lower Control Arm in a vise to install the new joint - refer to the removed Ball Joint for alignment. Press the Ball Joint crimps onto the joint body before putting back the lower Control Arm into the vehicle. Put back the wheel and tire then take off the safety stand while lowering the vehicle. Last check the wheel alignment to make sure it matches the required settings.

OEM Chevrolet Tahoe Ball Joint

Control Arm Joint

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Ball Joints found

View related parts
Chevrolet Tahoe Lower Ball Joint, Front
Part Number: 12475478
$103.35 MSRP: $161.18
You Save: $57.83 (36%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Stud Kit, Front Lower Control Arm Ball; Suspension Ball Joint; Ball Joint; Stud Kit, Steering Knuckle Lower Control Arm Pivot
- Position: Front Lower
- Replaces: 12472819
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2006 Chevrolet Tahoe | Base, LS, LT, Z71 | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Tahoe Lower Ball Joint, Front
Part Number: 19256481
$42.41 MSRP: $66.41
You Save: $24.00 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Stud Kit, Front Lower Control Arm Ball; Suspension Ball Joint; Ball Joint; Stud Kit, Steering Knuckle Lower Control Arm Pivot
- Position: Front Lower
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2014 Chevrolet Tahoe | Hybrid, LS, LT, LTZ, PPV, SSV | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
Chevrolet Tahoe Lower Ball Joint, Front
Part Number: 19209396
$74.49 MSRP: $116.69
You Save: $42.20 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Stud Kit, Front Lower Control Arm Ball; Suspension Ball Joint; Ball Joint; Stud Kit, Steering Knuckle Lower Control Arm Pivot
- Position: Front Lower
- Replaces: 15922557
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2016 Chevrolet Tahoe | Hybrid, LS, LT, LTZ, PPV, SSV | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
Chevrolet Tahoe Lower Ball Joint, Front
Part Number: 15687079
$44.20 MSRP: $88.75
You Save: $44.55 (51%)
ADD TO CART
Product Specifications
- Other Name: Stud Kit, Front Lower Control Arm Ball; Suspension Ball Joint; Ball Joint; Stud Kit, Steering Knuckle Lower Control Arm Pivot
- Position: Front Lower
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-1996 Chevrolet Tahoe | Base, LS, LT | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
View related parts
Chevrolet Tahoe Lower Ball Joint, Front
Part Number: 19416896
$88.06 MSRP: $145.05
You Save: $56.99 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Stud Kit, Front Lower Control Arm Ball; Ball Joint; Stud Kit, Steering Knuckle Lower Control Arm Pivot; Stud Kit, Front Wheel Lower Control Arm
- Position: Front Lower
- Replaces: 12480852, 15659724
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-2000 Chevrolet Tahoe | Base, Limited, LS, LT, Z71 | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
View related parts
Chevrolet Tahoe Upper Ball Joint
Part Number: 19146901
Product Specifications
- Other Name: Hose, Power Steering Gear Inlet; Ball Joint; Upper Ball Joints; Stud Kit, Steering Knuckle Upper Control Arm
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-2000 Chevrolet Tahoe | Base, Limited, LS, LT, Z71 | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
View related parts
Chevrolet Tahoe Lower Ball Joint, Front
Part Number: 19416898
Product Specifications
- Other Name: Stud Kit, Front Lower Control Arm Ball; Suspension Ball Joint; Ball Joint; Stud Kit, Steering Knuckle Lower Control Arm Pivot
- Position: Front Lower
- Replaces: 12380415, 12383410
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-2000 Chevrolet Tahoe | Base, Limited, LS, LT, Z71 | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
View related parts
Chevrolet Tahoe Upper Ball Joint, Front
Part Number: 19416903
Product Specifications
- Other Name: Stud Kit, Front Upper Control Arm Ball; Ball Joint; Upper Ball Joints; Stud Kit, Steering Knuckle Upper Control Arm
- Position: Front Upper
- Replaces: 15969282, 15659447
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-1999 Chevrolet Tahoe | Base, LS, LT | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL

Chevrolet Tahoe Ball Joint

Our website offers an extensive catalog of genuine Chevrolet Tahoe Ball Joint at unbeatable prices. Every OEM Chevrolet Tahoe Ball Joint comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet Tahoe Ball Joint Parts Questions & Experts Answers

Lower Ball Joint, Front
19209396
Q: How to replace the lower control arm ball joint on cast iron lower control arms on Chevrolet Tahoe?
A: You need to lift and stabilize the vehicle before removing the tire and wheel assembly to change the Ball Joint in lower Control Arms made of cast iron. You must lift and support the vehicle before taking out the lower Control Arm. Fix the Control Arm in a holding device while you use a cutting tool to take off the holding wires from the Ball Joint housing. Place the Ball Joint in the press to take it out from the lower Control Arm. Place the outer flange of the new Ball Joint against the joint before installing it into position. Secure the lower Control Arm in a vise to install the new joint - refer to the removed Ball Joint for alignment. Press the Ball Joint crimps onto the joint body before putting back the lower Control Arm into the vehicle. Put back the wheel and tire then take off the safety stand while lowering the vehicle. Last check the wheel alignment to make sure it matches the required settings.

Related Chevrolet Tahoe Parts

Browse Chevrolet Tahoe Ball Joint by Years

2016 2015 2014 2013 2012 2011 2010 2009 2008 2007 2006 2005 2004 2003 2002 2001 2000 1999 1998 1997 1996 1995