Make sure this part fits

GM 19416903
Upper Ball Joint, Front

1988-2002 GM

Customer Questions & Expert Answers (15)
GM 19416903 Upper Ball Joint, Front
  • Part Description
    Stud Kit, Front Upper Control Arm Ball; Ball Joint
  • Position
    Front Upper
  • Replaces
    15969282, 15659447
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    1999-2000 Cadillac EscaladeBase8 Cyl 5.7 L GAS
    1992-1994 Chevrolet BlazerBase, Cheyenne, Silverado, Silverado Sport8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
    1991-1999 Chevrolet C1500454 SS, Base, Cheyenne, LS, Scottsdale, Silverado, WT6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
    1992-1999 Chevrolet C1500 SuburbanBase, LS, LT, Silverado8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
    1989-2000 Chevrolet C2500Base, Cheyenne, LS, Scottsdale, Silverado, WT6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
    1992-1999 Chevrolet C2500 SuburbanBase, LS, LT, Silverado8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
    1988-2000 Chevrolet C3500Base, Cheyenne, LS, Scottsdale, Silverado8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
    1996-2002 Chevrolet Express 2500Base, LS6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
    1996-2002 Chevrolet Express 3500Base, LS6 Cyl 4.3 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS, 8 Cyl 8.1 L GAS
    1991-1999 Chevrolet K1500Base, Cheyenne, LS, Scottsdale, Silverado, Sport, WT6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL
    View More
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 19416903 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 19416903 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the final step in the process for the 2000 Chevrolet Express 3500? Posted by Customer
    A:
    Reinstall the front brake caliper and the tire and wheel assembly, then check the running clearance at all suspension components, remove the safety stands, lower the vehicle, and check the front wheel alignment.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Ball Joint
    Q:
    What tools are needed to replace the lower ball joint for the 2002 Chevrolet Express 2500? Posted by Customer
    A:
    Ball Joint Remover/Installer Set (J9519-E) and Ball Joint Separator (J23742).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Ball Joint
    Q:
    What is the next step after installing the upper ball joint for the 2001 Chevrolet Express 3500? Posted by Customer
    A:
    Install the upper control arm to the vehicle, followed by the nut and bolt that retain the wheel speed sensor harness and brake hose bracket to the upper control arm, tightening the retaining nut to 17 Nm (13 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Ball Joint
    Q:
    What precaution should be taken with the brake caliper for the 2000 Chevrolet Express 3500? Posted by Customer
    A:
    Support the brake caliper with a piece of wire to prevent damage to the brake line.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Ball Joint
    Q:
    What is the first step to service and repair the lower ball joint for the 2000 Chevrolet K3500? Posted by Customer
    A:
    Begin by raising the vehicle and supporting it with suitable safety stands.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Ball Joint
    Q:
    How do you remove the ball joint from the knuckle for the 2000 Chevrolet K3500? Posted by Customer
    A:
    Utilize the Ball Joint Separator (J 36607) to remove the ball joint from the knuckle while supporting the knuckle, and then remove the ball joint.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Ball Joint
    Q:
    What is the first step in the process for the 2000 GMC C3500? Posted by Customer
    A:
    Raise the vehicle and support the lower control arm with floor stands, ensuring the floor jack remains under the lower control arm.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Ball Joint
    Q:
    What should be done to block the knuckle assembly out of the way for the 2000 GMC C3500? Posted by Customer
    A:
    Place a wooden block between the frame and the upper control arm.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Ball Joint
    Q:
    What should be inspected in the steering knuckle for the 2001 GMC Savana 3500? Posted by Customer
    A:
    Inspect the tapered hole for dirt and damage; replace the knuckle if necessary.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Ball Joint
    Q:
    How do you secure the cotter pin for the 2001 GMC Savana 2500? Posted by Customer
    A:
    Install a new cotter pin, ensuring the slot in the nut aligns with the hole in the stud, and bend the cotter pin to secure it.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Ball Joint
    Q:
    How do you separate the ball joint from the steering knuckle for the 2002 GMC Savana 3500? Posted by Customer
    A:
    Utilize the Ball Joint Separator (J23742) to separate the ball joint from the steering knuckle, then remove the separator and pull the stud away from the knuckle to take out the ball joint.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Ball Joint
    Q:
    What is the procedure for removing the old ball joint for the 2002 GMC Savana 3500? Posted by Customer
    A:
    Center punch the rivets holding the ball joint to the control arm, drill a 6.35 mm (1/4 inch) deep hole in each rivet's center, drill away the rivet heads, and punch the rivets out using a small punch.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Ball Joint
    Q:
    What should be done after tightening the nuts for the 2000 GMC C2500? Posted by Customer
    A:
    Remove the lower control arm from the bench vice and reinstall it.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Ball Joint
    Q:
    What should be done with the cotter pin for the 2000 GMC Savana 3500? Posted by Customer
    A:
    Install a new cotter pin, aligning the slots in the nut with the hole in the stud, and tighten the nut if necessary to achieve alignment. Bend the cotter pin to prevent it from loosening.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Ball Joint
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Upper Ball Joint, Front 19416903 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 19416903 Upper Ball Joint, Front is available in the market under the name GM Ball Joint. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 19416903 Upper Ball Joint, Front fits certain Chevrolet Tahoe, Blazer, C1500 models, as well as GMC Yukon, C1500, C2500. Additionally, it is compatible with Cadillac Escalade models.
The original GM component designated by manufacturer part number 19416903 maintains top performance when functioning as the Stud Kit, Front Upper Control Arm Ball; Ball Joint unit at its Front Upper. The component 19416903 is constructed from durable material and its dimensions span 6.9 x 4.4 x 4.4 inches while weighing 2.30 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Upper Ball Joints; Stud Kit, Steering Knuckle Upper Control Arm. The part 19416903 has available replacement options 15969282, 15659447. Each vehicle needs 2 units of the part marked as SKU 19416903. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.