How to Replace the Front Rack and Pinion on Chevrolet Trailblazer?

The replacement of Rack And Pinion begins with vehicle lifting while using proper support and positioning a drain pan below. First remove tires and wheels from the vehicle and afterward remove outer tie rods retaining nuts. You need the steering linkage and tie rod puller (J24319-B) to separate the outer tie rods from their Steering Knuckle attachment points. Start by taking out the steering rack crossmember then disconnect the lower intermediate shaft from the Rack And Pinion. The Rack And Pinion's hose assembly can be detached when we remove its retaining bolt alongside the assembly itself. Install rack support and remove all mounting bolts before securing the rack out of the vehicle. Finally put the Rack And Pinion in place then install the outer tie rods. The Rack And Pinion mounting bolts need tightening to 110 nm (81 ft. Lbs.). Slowly attach the Rack And Pinion hose assembly to the rack by screwing in the retaining bolt until it reaches 12 nm (106 inch lbs.) torque. The Rack And Pinion receives the lower intermediate shaft and the steering rack crossmember gets reinstalled before securing outer tie rods to steering knuckles through retaining nuts at 60 nm (44 ft. Lbs.). After tire and wheel reinstallation you must remove the drain pan then put the vehicle back down before bleeding the Rack And Pinion system and conducting front toe adjustment.

OEM Chevrolet Trailblazer Rack And Pinion

Steering Rack And Pinion

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Rack And Pinions found

View related parts
Chevrolet Trailblazer Rack Part Number: 42769690
$904.88 MSRP: $1430.20
You Save: $525.32 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Gear Assembly-Rack & Pinion Steering
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021 Chevrolet Trailblazer | ACTIV, L, LS, LT, RS | 3 Cyl 1.2 L GAS, 3 Cyl 1.3 L GAS
View related parts
Chevrolet Trailblazer Rack Part Number: 42769689
$207.77 MSRP: $326.91
You Save: $119.14 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Gear Assembly-Rack & Pinion Steering
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021 Chevrolet Trailblazer | ACTIV, L, LS, LT, RS | 3 Cyl 1.2 L GAS, 3 Cyl 1.3 L GAS
View related parts
Chevrolet Trailblazer Gear Assembly Part Number: 42796291
$175.20 MSRP: $275.67
You Save: $100.47 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Gear Assembly-Rack & Pinion Steering; Gear, Steering
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2024 Chevrolet Trailblazer | RS | 3 Cyl 1.3 L GAS
View related parts
Chevrolet Trailblazer Steering Gear Part Number: 42745904
$191.52 MSRP: $326.07
You Save: $134.55 (42%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Gear Assembly-Rack & Pinion Steering; Gear Assembly; Rack; Gear, Steering
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021-2024 Chevrolet Trailblazer | ACTIV, L, LS, LT, RS | 3 Cyl 1.2 L GAS, 3 Cyl 1.3 L GAS
View related parts
Chevrolet Trailblazer Gear Assembly Part Number: 42745903
$895.10 MSRP: $1430.16
You Save: $535.06 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Gear Assembly-Rack & Pinion Steering; Rack; Gear, Steering
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021-2022 Chevrolet Trailblazer | ACTIV, L, LS, LT, RS | 3 Cyl 1.2 L GAS, 3 Cyl 1.3 L GAS
View related parts
Chevrolet Trailblazer Steering Gear Part Number: 19330462
Product Specifications
- Other Name: Gear Kit, Steering (Remanufacture); Gear Assembly; Gear Kit, Steering
- Replaces: 19207780, 26101416, 88965356
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2009 Chevrolet Trailblazer | Base, LS, LT, North Face | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Trailblazer Steering Gear Part Number: 19330461
Product Specifications
- Other Name: Gear Kit, Steering (Remanufacture); Gear Assembly; Gear Kit, Steering
- Replaces: 19207782, 19150430
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2009 Chevrolet Trailblazer | SS | 8 Cyl 6.0 L GAS
View related parts
Chevrolet Trailblazer Steering Gear Part Number: 19330446
Product Specifications
- Other Name: Gear Kit, Steering (Remanufacture); Gear Assembly; Gear Kit, Steering
- Replaces: 26100285, 88967181
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2006 Chevrolet Trailblazer | LS, LT, LTZ, North Face, SS | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
Chevrolet Trailblazer Steering Gear Part Number: 19330443
Product Specifications
- Other Name: Gear Kit, Steering (Remanufacture); Gear Assembly; Gear Kit, Steering
- Replaces: 26089516
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2003 Chevrolet Trailblazer | LS, LT, LTZ, North Face | 6 Cyl 4.2 L GAS

Chevrolet Trailblazer Rack And Pinion

Want to cut long-term maintenance and repair costs? Choose OEM Rack And Pinion. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Trailblazer parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Trailblazer Rack And Pinion includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

Chevrolet Trailblazer's Rack And Pinion is an important supplier that converts the rotational movement of the steering wheel into the side motion of the front wheels. This is done through arrangement of a pinion gear which is in contact with the rack gear which is housed in a metallic tube that has been fixed on the chassis. Nearly all the contemporary Trailblazer automobiles come equipped with power assisted, rack and pinion steering with hydraulic power steering being responsible for supplying pressurized fluid to help shift the rack from left to right within the tube. Problems with the Steering Rack are caused by O-ring seals that wear out, leakage of the hydraulic system, or wear of the gears is accompanied by signs such as tight steering, metallic sound, and instability. Steering wheel play and the situation when the vehicle pulls to one side can indicate the need for rack and pinion replacement. There might be issues pertaining to this component but the rack and pinion system in Chevrolet Trailblazer cars maintains the accurate control and strong feel of the steering wheel which is crucial for the safety of the passengers and driver.

Chevrolet Trailblazer Rack And Pinion Parts Questions & Experts Answers

Steering Gear
19330462
Q: How to Replace the Front Rack and Pinion on Chevrolet Trailblazer?
A:
The replacement of Rack And Pinion begins with vehicle lifting while using proper support and positioning a drain pan below. First remove tires and wheels from the vehicle and afterward remove outer tie rods retaining nuts. You need the steering linkage and tie rod puller (J24319-B) to separate the outer tie rods from their Steering Knuckle attachment points. Start by taking out the steering rack crossmember then disconnect the lower intermediate shaft from the Rack And Pinion. The Rack And Pinion's hose assembly can be detached when we remove its retaining bolt alongside the assembly itself. Install rack support and remove all mounting bolts before securing the rack out of the vehicle. Finally put the Rack And Pinion in place then install the outer tie rods. The Rack And Pinion mounting bolts need tightening to 110 nm (81 ft. Lbs.). Slowly attach the Rack And Pinion hose assembly to the rack by screwing in the retaining bolt until it reaches 12 nm (106 inch lbs.) torque. The Rack And Pinion receives the lower intermediate shaft and the steering rack crossmember gets reinstalled before securing outer tie rods to steering knuckles through retaining nuts at 60 nm (44 ft. Lbs.). After tire and wheel reinstallation you must remove the drain pan then put the vehicle back down before bleeding the Rack And Pinion system and conducting front toe adjustment.