How to replace the outer tie rod end on Chevrolet Trailblazer?

The process to replace the outer Tie Rod End starts with vehicle support followed by removing tire and wheel. You need to remove the outer tie rod retaining nut after which you should avoid damaging seal through separation of the steering linkage joint by securing it with a wedge placed between the joint and attachment points. Detach the outer tie rod from the Steering Knuckle by utilizing the steering linkage and tie rod puller (J24319-B). Unfasten the jam nut before removing the outer tie rod from the inner tie rod section. Reserve the jam nut for disposal. Verify that the shaft possesses no bent threads and clean all areas on the Steering Knuckle's tapered surface. The installation process for a new outer tie rod begins with putting suitable chassis lubricant on the inner tie rod threads. Afterward you must install a fresh jam nut onto the outer tie rod before connecting it to the inner tie rod . Secure the outer tie rod to the Steering Knuckle then apply an outer tie rod retaining nut and tighten it to 45 nm (33 ft. Lbs.). After the tire replacement proceed to reattach the wheel and lower the vehicle before conducting front toe adjustment.

OEM Chevrolet Trailblazer Tie Rod End

Steering Rod End

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Tie Rod Ends found

View related parts
Chevrolet Trailblazer Outer Tie Rod, Passenger Side
Part Number: 26100287
$148.79 MSRP: $253.32
You Save: $104.53 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rod Kit, Steering Linkage Outer Tie; Steering Tie Rod End; Outer Tie Rod End; Tie Rod End; Rod Kit, Steering Tie Rod Outer
- Position: Outer Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2009 Chevrolet Trailblazer | Base, LS, LT, LTZ, North Face, SS | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
Chevrolet Trailblazer Outer Tie Rod, Driver Side
Part Number: 26100286
$159.55 MSRP: $253.32
You Save: $93.77 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rod Kit, Steering Linkage Outer Tie; Steering Tie Rod End; Outer Tie Rod End; Tie Rod End; Rod Kit, Steering Tie Rod Outer
- Position: Outer Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2009 Chevrolet Trailblazer | Base, LS, LT, LTZ, North Face, SS | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
Chevrolet Trailblazer Outer Tie Rod, Passenger Side
Part Number: 26089598
$84.06 MSRP: $177.47
You Save: $93.41 (53%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rod Kit, Steering Linkage Outer Tie; Steering Tie Rod End; Outer Tie Rod End; Tie Rod End; Rod Kit, Steering Tie Rod Outer
- Position: Outer Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002 Chevrolet Trailblazer | LS, LT, LTZ, North Face | 6 Cyl 4.2 L GAS
View related parts
Chevrolet Trailblazer Outer Tie Rod, Driver Side
Part Number: 26089597
$121.23 MSRP: $199.71
You Save: $78.48 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rod Kit, Steering Linkage Outer Tie; Steering Tie Rod End; Outer Tie Rod End; Tie Rod End; Rod Kit, Steering Tie Rod Outer
- Position: Outer Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002 Chevrolet Trailblazer | LS, LT, LTZ, North Face | 6 Cyl 4.2 L GAS
View related parts
Chevrolet Trailblazer Outer Tie Rod, Passenger Side
Part Number: 42769694
$54.72 MSRP: $97.72
You Save: $43.00 (44%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rod Assembly-Steering Linkage Outer Tie; Rod, Steering Tie Rod Outer
- Position: Passenger Side
- Replaces: 42745902
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021-2024 Chevrolet Trailblazer | ACTIV, L, LS, LT, RS | 3 Cyl 1.2 L GAS, 3 Cyl 1.3 L GAS
View related parts
Chevrolet Trailblazer Outer Tie Rod, Driver Side
Part Number: 42769693
$54.72 MSRP: $97.72
You Save: $43.00 (44%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rod Assembly-Steering Linkage Outer Tie; Rod, Steering Tie Rod Outer
- Position: Driver Side
- Replaces: 42745901
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021-2024 Chevrolet Trailblazer | ACTIV, L, LS, LT, RS | 3 Cyl 1.2 L GAS, 3 Cyl 1.3 L GAS

Chevrolet Trailblazer Tie Rod End

Our website offers an extensive catalog of genuine Chevrolet Trailblazer Tie Rod End at unbeatable prices. Every OEM Chevrolet Trailblazer Tie Rod End comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet Trailblazer Tie Rod End Parts Questions & Experts Answers

Outer Tie Rod, Driver Side
26089597
Q: How to replace the outer tie rod end on Chevrolet Trailblazer?
A: The process to replace the outer Tie Rod End starts with vehicle support followed by removing tire and wheel. You need to remove the outer tie rod retaining nut after which you should avoid damaging seal through separation of the steering linkage joint by securing it with a wedge placed between the joint and attachment points. Detach the outer tie rod from the Steering Knuckle by utilizing the steering linkage and tie rod puller (J24319-B). Unfasten the jam nut before removing the outer tie rod from the inner tie rod section. Reserve the jam nut for disposal. Verify that the shaft possesses no bent threads and clean all areas on the Steering Knuckle's tapered surface. The installation process for a new outer tie rod begins with putting suitable chassis lubricant on the inner tie rod threads. Afterward you must install a fresh jam nut onto the outer tie rod before connecting it to the inner tie rod . Secure the outer tie rod to the Steering Knuckle then apply an outer tie rod retaining nut and tighten it to 45 nm (33 ft. Lbs.). After the tire replacement proceed to reattach the wheel and lower the vehicle before conducting front toe adjustment.