How to replace the air conditioning evaporator core on Chevrolet Uplander?

The first step to replace an Evaporator core requires hvac module assembly removal followed by heater outlet duct screws and the duct itself before proceeding. To start replace the Heater Core cover and Heater Core pipe screw and subsequently remove the Heater Core. You must detach the hvac module from the dash panel sound barrier seal and the lower hvac module screws before you can divide the module into upper and lower parts. To extract the txv from the Evaporator core discard both sealing washers following screw removal of the thermal expansion valve (TXV), Evaporator core and Evaporator temperature sensor. Attention must be given to adding the specified polyalkylene glycol oil (PAG) directly to the new Evaporator core before installing sealing washers across the Evaporator line for a proper txv connection. Fasten the txv using mounting screws at 3.2 n.m (28 lb in) torque before putting on the Evaporator temperature sensor and Evaporator core. The hvac technician should place the upper case onto the lower case before tightening lower hvac module screws to 1.2 n.m (11 lb in). Position the hvac module into the dash panel sound barrier followed by the Heater Core and Heater Core pipe which should be fastened with screws at 1.2 n.m of torque (11 lb in). The Heater Core requires screws to attach the cover while maintaining a tightness of 1.2 n.m (11 lb in). Then reinstall the heater outlet duct and its screws tightened to 1.2 n.m (11 lb in). Put back the hvac module assembly as the last step.

OEM Chevrolet Uplander Evaporator

A/C Evaporator Core

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Evaporators found

View related parts
Chevrolet Uplander Evaporator Core Part Number: 10364925
$176.41 MSRP: $319.30
You Save: $142.89 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Evaporator Kit-A/C; A/C Evaporator Core Repair Kit; A/C Evaporator Core; A/C Evaporator; Evaporator Kit, A/C Evaporator; Evaporator
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2008 Chevrolet Uplander | Base, LS, LT | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
View related parts
Chevrolet Uplander Evaporator Core Part Number: 15925708
Product Specifications
- Other Name: Evaporator Kit-Auxiliary A/C; A/C Evaporator Core Repair Kit; A/C Evaporator Core; A/C Evaporator; Evaporator Kit, A/C Evaporator; Evaporator
- Replaces: 10362451
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2008 Chevrolet Uplander | Base, LS, LT | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS

Chevrolet Uplander Evaporator

Want to cut long-term maintenance and repair costs? Choose OEM Evaporator. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Uplander parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Uplander Evaporator includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

The Chevrolet Uplander Evaporator is an important part that plays a role of boosting the working capacity and durability of one of the Chevrolet Uplander vehicles;a minivan type manufactured between 2005 and 2009. This evaporator plays a big role in making the cabin cool by condensing the air in order to avoid heat build-up for the passengers comfort. Being a Chevrolet Uplander Evaporator located under the dashboard, it functions well as warm air passes over the aluminum fins changing the state of refrigerant from liquid to vapor with the task of cooling as well as dehumidifying air. Thus, this dual function is necessary to provide comfortable working conditions inside the Uplander during very hot climate. The Chevrolet car part suitable in the evaporator category is designed to fit in multiple models of Uplander, making it an ideal part to ensure the vehicle's climate control is in good working order. It has not suffered design changes and minor differences may be observed between model years while still being able to create a package that corresponds to the Uplander's variants. Durability of Chevrolet Uplander Evaporator is essential since it reduces chances of leaks and corrosion likely to affect the general performance. Also, when it comes to the automotive safety, the heat exchanger or the evaporator plays an important role to remove the moisture so that water does not accumulate under the Uplander. Looking at the construction of the Chevrolet Uplander Evaporator one cannot help but note that it was made sturdy while at the same time is functional and efficient in its operation, making it a worthy representation of the Chevrolet brand in auto-market.

Chevrolet Uplander Evaporator Parts Questions & Experts Answers

Evaporator Core
10364925
Q: How to replace the air conditioning evaporator core on Chevrolet Uplander?
A:
The first step to replace an Evaporator core requires hvac module assembly removal followed by heater outlet duct screws and the duct itself before proceeding. To start replace the Heater Core cover and Heater Core pipe screw and subsequently remove the Heater Core. You must detach the hvac module from the dash panel sound barrier seal and the lower hvac module screws before you can divide the module into upper and lower parts. To extract the txv from the Evaporator core discard both sealing washers following screw removal of the thermal expansion valve (TXV), Evaporator core and Evaporator temperature sensor. Attention must be given to adding the specified polyalkylene glycol oil (PAG) directly to the new Evaporator core before installing sealing washers across the Evaporator line for a proper txv connection. Fasten the txv using mounting screws at 3.2 n.m (28 lb in) torque before putting on the Evaporator temperature sensor and Evaporator core. The hvac technician should place the upper case onto the lower case before tightening lower hvac module screws to 1.2 n.m (11 lb in). Position the hvac module into the dash panel sound barrier followed by the Heater Core and Heater Core pipe which should be fastened with screws at 1.2 n.m of torque (11 lb in). The Heater Core requires screws to attach the cover while maintaining a tightness of 1.2 n.m (11 lb in). Then reinstall the heater outlet duct and its screws tightened to 1.2 n.m (11 lb in). Put back the hvac module assembly as the last step.