How to replace the front wheel axle shaft on Chevrolet Venture?

A mechanic must first support the car by raising it before disassembling the wheel assembly together with the engine splash shield. You should use a drift or punch to pass through the brake caliper and brake rotor to stop Wheel Hub and bearing rotation before finishing nut removal from the spindle. First disconnect the Wheel Speed Sensor electrical connector while positioning the wiring harness away from the Ball Joint then remove the stabilizer shaft link followed by disconnecting the outer Tie Rod End from the Steering Knuckle without loosening the Tie Rod End jam nut. Install the Wheel Hub remover (J42129) onto the Wheel Hub while securing it with wheel nuts before completely removing the wheel drive shaft by supporting it until removal is complete. The Wheel Hub remover tool (J42129) enables users to disconnect the wheel drive shaft from its position with the Wheel Hub and bearing. The wheel drive shaft separation process requires the combination of Axle Shaft (J33008-A), Axle Shaft remover extension (J29794), and slide hammer (J2619-01) for disengagement of the wheel drive shaft from the transaxle until complete removal from the vehicle. To install the wheel drive shaft the first step is to mount it into the transaxle position while checking engagement by pulling on the inner tripot housing. Before attaching the wheel drive shaft to the hub and bearing users must first connect the Ball Joint to the Steering Knuckle and then reinstall the Wheel Speed Sensor electrical connector. Secure the stabilizer shaft link in place before using a drift or punch to pass through both the brake caliper and rotor for rotor and hub and bearing rotation prevention. The wheel drive shaft spindle requires its nut to achieve 160nm (118 ft. Lbs.) tightening torque before the outer Tie Rod End should be connected to the Steering Knuckle and the engine splash shield and tire and wheel assembly installation together with lowering the vehicle.

OEM Chevrolet Venture Axle Shaft

Car Axle Shaft

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Axle Shafts found

View related parts
Chevrolet Venture Axle Assembly, Front Passenger Side Part Number: 23191340
$252.52 MSRP: $474.22
You Save: $221.70 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft, Front Wheel Drive Axle; CV Axle Assembly; Axle Shaft; CV Axle; Axle
- Position: Front Passenger Side
- Replaces: 20859643, 26073396, 26073385, 88965660, 88965658
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2005 Chevrolet Venture | Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS
View related parts
Chevrolet Venture Axle Assembly, Rear Part Number: 10414207
$1168.47 MSRP: $1503.83
You Save: $335.36 (23%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Axle Assembly, Rear (W/O Brake) (Service); Axle Shaft; Axle Beam; Axle, Rear Axle
- Position: Rear
- Replaces: 10289202
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2005 Chevrolet Venture | Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS
View related parts
Chevrolet Venture Axle Assembly, Front Driver Side Part Number: 20859642
Product Specifications
- Other Name: Shaft Assembly-Front Wheel Drive; CV Axle Assembly; Axle Shaft; CV Axle; Axle; Shaft, Front Wheel Drive Axle
- Position: Front Driver Side
- Replaces: 26073399, 88965659, 88965657, 26073386
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2005 Chevrolet Venture | Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS
View related parts
Chevrolet Venture Axle Assembly, Front Passenger Side Part Number: 26093721
Product Specifications
- Other Name: Shaft Kit, Front Wheel Drive; CV Axle Assembly; Axle Shaft; CV Axle; Axle
- Position: Front Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2005 Chevrolet Venture | Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS
View related parts
Chevrolet Venture Axle Assembly Part Number: 88967242
Product Specifications
- Other Name: Shaft Kit, Rear Axle Drive; CV Axle Assembly; Axle Shaft; CV Joint; CV Axle; Inner CV Joint; Outer CV Joint; Joint Kit, Rear Axle Universal Joint.
- Position: Rear
- Replaces: 10424907, 88891077
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2005 Chevrolet Venture | Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS
View related parts
Chevrolet Venture Axle Assembly, Front Driver Side Part Number: 26054579
Product Specifications
- Other Name: Shaft Kit, Front Wheel Drive; CV Axle Assembly; Axle Shaft; CV Axle; Axle; Shaft Kit, Front Wheel Drive Axle
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999 Chevrolet Venture | Base, LS | 6 Cyl 3.4 L GAS
View related parts
Chevrolet Venture Axle Assembly, Front Driver Side Part Number: 26047918
Product Specifications
- Other Name: Shaft Kit, Front Wheel Drive; CV Axle Assembly; Axle Shaft; CV Axle; Axle; Shaft Kit, Front Wheel Drive Axle
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-1998 Chevrolet Venture | Base, LS | 6 Cyl 3.4 L GAS
View related parts
Chevrolet Venture Axle Assembly, Front Passenger Side Part Number: 26047914
Product Specifications
- Other Name: Shaft Kit, Front Wheel Drive; CV Axle Assembly; Axle Shaft; CV Axle; Axle; Shaft Kit, Front Wheel Drive Axle
- Position: Front Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-1999 Chevrolet Venture | Base, LS | 6 Cyl 3.4 L GAS
View related parts
Chevrolet Venture Axle Assembly, Rear Part Number: 10414206
Product Specifications
- Other Name: Axle, Rear Axle; Axle Shaft
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2004 Chevrolet Venture | Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS

Chevrolet Venture Axle Shaft

Want to cut long-term maintenance and repair costs? Choose OEM Axle Shaft. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Venture parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Venture Axle Shaft includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

Chevrolet Venture Axle Shaft is now considered as one of the significant components of the car, which is part of the Chevrolet Venture series that was manufactured since 1997 to 2005. This critical component provides for the change of torque from the differential to the drive wheels and independent rotation for improved traction especially during cornering. The Chevrolet Venture makes use of halfshafts apart from serving as an element of the vehicle's independent suspension system enhancing the smoothness of the ride and the handling ability of the car. The mentioned Axle Shaft is quite durable and hence, the Chevrolet Venture models- Base, LS, and LT- are compatible with the Axle Shaft. Of course, the Chevrolet Venture Axle Shaft does not only improve the performance; it literally strengthens the points that are crucial for the vehicle's efficiency and safety. Such as splined ends; which directly connect to the differential and wheel hubs, the Axle Shaft guarantees that power is delivered effectively while at the same time reducing on wear and tear. Moreover, realizing the fact, the Chevrolet Venture extendable for a short wheelbase and a long wheelbase variant and eight-seater facility also demonstrate the flexibility for which the Axle Shaft is used. Especially, there is the Chevrolet Venture Axle Shaft that captured the attention of car buyers at the American market because apart from its sturdiness, the minivan fully represents what has been created by today's engineers, thus, it can be considered as the one suitable to provide families with the supreme kind of minivan experience.

Chevrolet Venture Axle Shaft Parts Questions & Experts Answers

Axle Assembly, Front Passenger Side
23191340
Q: How to replace the front wheel axle shaft on Chevrolet Venture?
A:
A mechanic must first support the car by raising it before disassembling the wheel assembly together with the engine splash shield. You should use a drift or punch to pass through the brake caliper and brake rotor to stop Wheel Hub and bearing rotation before finishing nut removal from the spindle. First disconnect the Wheel Speed Sensor electrical connector while positioning the wiring harness away from the Ball Joint then remove the stabilizer shaft link followed by disconnecting the outer Tie Rod End from the Steering Knuckle without loosening the Tie Rod End jam nut. Install the Wheel Hub remover (J42129) onto the Wheel Hub while securing it with wheel nuts before completely removing the wheel drive shaft by supporting it until removal is complete. The Wheel Hub remover tool (J42129) enables users to disconnect the wheel drive shaft from its position with the Wheel Hub and bearing. The wheel drive shaft separation process requires the combination of Axle Shaft (J33008-A), Axle Shaft remover extension (J29794), and slide hammer (J2619-01) for disengagement of the wheel drive shaft from the transaxle until complete removal from the vehicle. To install the wheel drive shaft the first step is to mount it into the transaxle position while checking engagement by pulling on the inner tripot housing. Before attaching the wheel drive shaft to the hub and bearing users must first connect the Ball Joint to the Steering Knuckle and then reinstall the Wheel Speed Sensor electrical connector. Secure the stabilizer shaft link in place before using a drift or punch to pass through both the brake caliper and rotor for rotor and hub and bearing rotation prevention. The wheel drive shaft spindle requires its nut to achieve 160nm (118 ft. Lbs.) tightening torque before the outer Tie Rod End should be connected to the Steering Knuckle and the engine splash shield and tire and wheel assembly installation together with lowering the vehicle.