How to replace the fuel filler hose on Chevrolet Venture?

Question

Accepted Answer

The first step to replace the Fuel Filler Hose requires draining the Fuel Tank while capping all fittings to stop contamination. First drain the Fuel Tank of its contents then cap the fittings to avoid contamination. After removing the fuel filler pipe to fuel fill pocket bolts raise the vehicle and detach the fuel filler pipe shield. The fuel filler pipe installation requires the detachment of the wheelhouse stud attaching nut followed by the wheelhouse panel attaching screw after which you must remove the fuel filler pipe bracket bolt along with the vent pipe. The first step begins with taking out the Fuel Filler Hose at its place in the Fuel Tank before you extract both the fuel filler pipe and hose. Begin with fuel filler pipe and hose attachment to the Fuel Tank while verifying the complete insertion of the fill hose. The tightness of the fuel filler pipe clamp should reach 2.5 n.m (22 lb in) before the fuel filler pipe attaching screw is fastened to the wheelhouse panel and tightened to 25 n.m (18 lb ft). The process starts with attaching the fuel filler pipe attaching nut onto the wheelhouse panel before tightening it to 10 n.m (89 lb in). Then install the fuel filler pipe shield. Reposition the vehicle and attach the fuel filler pipe back into the fuel fill pocket before filling the Fuel Tank while replacing its cap. Complete the process by installing the negative Battery Cable then check for fuel leakages.

OEM Chevrolet Venture Fuel Filler Hose

4 Fuel Filler Hoses found

Chevrolet Venture Filler Neck

Chevrolet Venture Filler Neck

Chevrolet Venture Filler Neck

Chevrolet Venture Connector Hose

Chevrolet Venture Fuel Filler Hose

Chevrolet Venture Fuel Filler Hose Parts Questions & Experts Answers

Related Chevrolet Venture Parts

Browse Chevrolet Venture Fuel Filler Hose by Years