OEM Chevrolet Venture Pushrod

Chevrolet Venture Pushrod Parts Questions & Experts Answers

• Push Rods
  10166354
  Q: How to replace the pushrods and valve rocker arm on Chevrolet Venture?

  A: The replacement process begins with removing valve Rocker Arm covers along with their corresponding bolts followed by valve Rocker Arm removal along with push rod parts. Apply prelube gm p/n 1052365 equivalent product to the ends of push rods before installing the intake valve push rods measuring 144 mm (5.75 inches) in length yellow while placing them in their original position followed by inserting the exhaust valve push rods which have a 152.5 mm (6.0 inches) length and are green. Apply the exact prelube material to treat every Rocker Arm friction surface. Apply the torque angle meter (J 36660-A) for tightening the valve Rocker Arm bolts to 19 nm (14 ft. Lbs.) while using an additional 30-degree torque angle. The installation of valve Rocker Arm covers should be the final step.