OEM Chevrolet Venture Rack And Pinion

Steering Rack And Pinion
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Rack And Pinions found

  • Chevy Venture Rack And Pinion - 26065032
    Chevy Venture Rack And Pinion Diagram - 26065032
    View related parts

    Chevrolet Venture Gear Assembly

    Part Number: 26065032
    $668.34 MSRP: $1056.33
    You Save: $387.99 (37%)
    Ships in 1-3 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Gear Assembly-Steering
    • Replaces: 26065144
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    Fits the following Vehicles:
    • 1997-1998 Chevrolet Venture | Base, LS | 6 Cyl 3.4 L GAS
  • Chevy Venture Rack And Pinion - 26098001
    Chevy Venture Rack And Pinion Diagram - 26098001
    View related parts
    Product Specifications
    • Other Name: Gear Kit, Steering (Remanufacture); Steering Gear Assembly
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    Fits the following Vehicles:
    • 2002-2005 Chevrolet Venture | Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS
  • Chevy Venture Rack And Pinion - 19330434
    Chevy Venture Rack And Pinion Diagram - 19330434
    View related parts
    Product Specifications
    • Other Name: Gear Kit, Steering (Remanufacture); Gear Assembly; Steering Gear Assembly; Gear Kit, Steering
    • Replaces: 26053458
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    Fits the following Vehicles:
    • 1997-2005 Chevrolet Venture | Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS

Chevrolet Venture Rack And Pinion

Our website offers an extensive catalog of genuine Chevrolet Venture Rack And Pinion at unbeatable prices. Every OEM Chevrolet Venture Rack And Pinion comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet Venture Rack And Pinion Parts Questions & Experts Answers

  • Q: How to replace the Rack and Pinion steering gear on Chevrolet Venture?
    A: Begin by positioning the Steering Shaft at 12 o'clock so its block tooth faces upward and position the wheels ahead and set the ignition switch to the lock setting before proceeding. The vehicle needs to be raised before being secured for work. First remove the stabilizer shaft followed by detached Tie Rod Ends from the Steering Knuckles. The next procedure requires steering intermediate shaft removal from the Rack And Pinion before supporting the frame with a utility stand. When discarding the frame rear bolts users should maintain the frame's height to prevent contact with engine components. The powertrain and frame should be lowered through the utility stand while removing both Rack And Pinion cooler pipe and pressure hose attached to the Rack And Pinion. Remove Rack And Pinion bolts and nuts while extracting the Rack And Pinion by entering the vehicle's left side wheel opening. Install the new Rack And Pinion through the left side wheel opening into the frame by tightening Rack And Pinion bolts which should be rust-free with 2 nm (18 inch lbs.) of preset torque to their counterparts before installation completes. If not, replace them. Begin by tightening the Rack And Pinion nuts to 80 nm (59 ft. Lbs.) then attach the pressure hose and cooler pipe while securing the pipe with its retaining clip. First raise the frame and powertrain with the utility stand before putting new frame rear bolts then taking out the utility stand. Proceed with restoring the steering intermediate shaft connection to the Rack And Pinion and afterward reinstall the steering knuckles to their tie rod ends and the stabilizer shaft. The technician follows this order: lower the vehicle then fills the Rack And Pinion system followed by bleeding air from the system while also inspecting for leaks and performing necessary toe adjustments.

Related Chevrolet Venture Parts