How to replace the Power Steering Hose on Chevrolet Venture?

The replacement of p/s cooler pipe/hose begins by suspending and raising the vehicle. You must place a drain pan under both the Power Steering Pump and gear before you detach the return hose from the cooler pipe. Steering gear damage and loss of control will occur if you do not disconnect the intermediate shaft from the Rack And Pinion stub shaft. Set the Steering Shaft to position its upper block tooth at 12 o'clock while steering wheels remain straight ahead and the ignition switch should be set to lock for coil safety. First disconnect the intermediate shaft from the steering gear before you secure the frame rear on a utility stand to remove the frame rear bolts. Access the frame rear by lowering it and then remove the Power Steering Hose clip and steering cooler pipe from the steering gear and its retainer bolt/screw and frame retainer. The cooler pipe requires removal from its retainers on the frame before extracting it. Start by installing the cooler pipe to the frame retainers before installing the cooler pipe retainer along with its bolt/screw which should be tightened up to 10 nm (89 inch lbs.). Fasten the steering gear fitting on the cooler pipe then install the power steering gear hose clip and return hose onto the cooler pipe. Rear up the frame using a utility stand while adding the new frame rear bolts. Check that the Steering Shaft lies in the correct spot as you set the ignition switch to lock before you install the intermediate shaft to the steering gear. After lowering the vehicle finish the process by filling the power steering fluid reservoir and performing a power steering system bleed.

OEM Chevrolet Venture Power Steering Hose

Power Steering Pressure Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

13 Power Steering Hoses found

View related parts
Chevrolet Venture Power Steering Pressure Hose
Part Number: 26068759
$108.35 MSRP: $178.49
You Save: $70.14 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly-Power Steering Gear Inlet; Power Steering Hose; Pressure Hose; Hose, Steering Gear Oil Pressure
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999-2001 Chevrolet Venture | Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS
View related parts
Chevrolet Venture Power Steering Cooler
Part Number: 26076946
Product Specifications
- Other Name: Hose, Steering Fluid Cooler
- Replaces: 10309270, 26079270
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999-2005 Chevrolet Venture | Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS
View related parts
Chevrolet Venture Power Steering Return Hose
Part Number: 26075225
Product Specifications
- Other Name: Hose, Steering Gear Oil Return; Power Steering Hose; Return Hose; Return Tube; Upper Return Hose; Pipe, Steering Gear Oil Return
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999-2005 Chevrolet Venture | Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS
View related parts
Chevrolet Venture Power Steering Cooler
Part Number: 15777624
Product Specifications
- Other Name: Hose Assembly-Power Steering Fluid Cooling; Cooling Pipe; Power Steering Oil Cooler; Hose, Steering Fluid Cooler
- Replaces: 26073959
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002 Chevrolet Venture | Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS
View related parts
Chevrolet Venture Pipe Kit, Passenger Side
Part Number: 26081831
Product Specifications
- Other Name: Pipe Kit, Steering Gear; Power Steering Hose; Pressure Line; Line Kit; Line; Pipe Kit, Hydraulic Steering Gear Pressure; Pipe Kit, Steering Gear Oil Pressure
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2005 Chevrolet Venture | Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS
View related parts
Chevrolet Venture Pipe Kit, Driver Side
Part Number: 26081830
Product Specifications
- Other Name: Pipe Kit, Steering Gear; Power Steering Hose; Pressure Line; Line Kit; Line; Pipe Kit, Hydraulic Steering Gear Pressure; Pipe Kit, Steering Gear Oil Pressure
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2005 Chevrolet Venture | Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS
View related parts
Chevrolet Venture Power Steering Pressure Hose
Part Number: 26064190
Product Specifications
- Other Name: Hose Assembly-Power Steering Gear Inlet; Power Steering Hose; Pressure Hose; Hose, Steering Gear Oil Pressure
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-1998 Chevrolet Venture | Base, LS | 6 Cyl 3.4 L GAS
View related parts
Chevrolet Venture Pipe Kit, Passenger Side
Part Number: 26045506
Product Specifications
- Other Name: Pipe Kit, Steering Gear Oil Pressure; Power Steering Hose; Pressure Line; Line Kit; Line
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2005 Chevrolet Venture | Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS
View related parts
Chevrolet Venture Pipe Kit, Driver Side
Part Number: 26045505
Product Specifications
- Other Name: Pipe Kit, Steering Gear Oil Pressure; Power Steering Hose; Pressure Line; Line Kit; Line
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2005 Chevrolet Venture | Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS
View related parts
Chevrolet Venture Power Steering Return Hose
Part Number: 26041962
Product Specifications
- Other Name: Hose-Power Steering Fluid Reservoir Inlet; Power Steering Hose; Return Hose; Pipe, Steering Gear Oil Return
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-1998 Chevrolet Venture | Base, LS | 6 Cyl 3.4 L GAS
View related parts
Chevrolet Venture Power Steering Cooler
Part Number: 26041952
Product Specifications
- Other Name: Hose Assembly-Power Steering Fluid Cooling; Hose, Steering Fluid Cooler
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-1998 Chevrolet Venture | Base, LS | 6 Cyl 3.4 L GAS
View related parts
Chevrolet Venture Power Steering Pressure Hose
Part Number: 15777622
Product Specifications
- Other Name: Hose Assembly-Power Steering Gear Inlet; Power Steering Hose; Pressure Hose; Hose, Hydraulic Steering Gear Pressure; Hose, Steering Gear Oil Pressure
- Replaces: 10311306
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2005 Chevrolet Venture | Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS
View related parts
Chevrolet Venture Power Steering Return Hose
Part Number: 15777620
Product Specifications
- Other Name: Pipe, Steering Gear Oil Return; Power Steering Hose; Return Hose
- Replaces: 26073960
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2005 Chevrolet Venture | Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS

Chevrolet Venture Power Steering Hose

Our website offers an extensive catalog of genuine Chevrolet Venture Power Steering Hose at unbeatable prices. Every OEM Chevrolet Venture Power Steering Hose comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet Venture Power Steering Hose Parts Questions & Experts Answers

Power Steering Pressure Hose
26068759
Q: How to replace the Power Steering Hose on Chevrolet Venture?
A: The replacement of p/s cooler pipe/hose begins by suspending and raising the vehicle. You must place a drain pan under both the Power Steering Pump and gear before you detach the return hose from the cooler pipe. Steering gear damage and loss of control will occur if you do not disconnect the intermediate shaft from the Rack And Pinion stub shaft. Set the Steering Shaft to position its upper block tooth at 12 o'clock while steering wheels remain straight ahead and the ignition switch should be set to lock for coil safety. First disconnect the intermediate shaft from the steering gear before you secure the frame rear on a utility stand to remove the frame rear bolts. Access the frame rear by lowering it and then remove the Power Steering Hose clip and steering cooler pipe from the steering gear and its retainer bolt/screw and frame retainer. The cooler pipe requires removal from its retainers on the frame before extracting it. Start by installing the cooler pipe to the frame retainers before installing the cooler pipe retainer along with its bolt/screw which should be tightened up to 10 nm (89 inch lbs.). Fasten the steering gear fitting on the cooler pipe then install the power steering gear hose clip and return hose onto the cooler pipe. Rear up the frame using a utility stand while adding the new frame rear bolts. Check that the Steering Shaft lies in the correct spot as you set the ignition switch to lock before you install the intermediate shaft to the steering gear. After lowering the vehicle finish the process by filling the power steering fluid reservoir and performing a power steering system bleed.

Related Chevrolet Venture Parts

Browse Chevrolet Venture Power Steering Hose by Years

2005 2004 2003 2002 2001 2000 1999 1998 1997