OEM GMC C2500 Brake Pedal

GMC C2500 Brake Pedal Parts Questions & Experts Answers

• Parking Brake Control
  15155147
  Q: How to service and repair the Brake Pedal Assembly on GMC C2500?

  A: Make sure you disable sir while disconnecting the negative Battery Cable for Brake Pedal assembly service and repair. Pull off the electrical connection from the stoplamp switch and take out the Pushrod retaining clip before the switch. When served, take out the Brake Pedal by unscrewing the bolt nut and bolt first then untwist the Pushrod from its Brake Pedal stud location. Start by putting the Brake Pedal in place followed by the bolt and then fasten the bolt nut to 47 n.m (35 lb ft). Install the stoplamp switch into place and fasten the Pushrod retaining clip to its original position. Rejoin the stoplamp switch electrical connection and switch on sir before tightening the negative Battery Cable up to 17 n.m (13 lb ft).