How to service the exhaust hangers and ensure the support of the exhaust system on GMC Canyon?

The first step is to safely raise and support the vehicle while using protective goggles and gloves during service to exhaust hangers and support of the exhaust system. The entire process must avoid the use of oil-based lubrication. A solution of soap becomes essential for hanger removal since it should be applied to both the frame support bracket rod and the exhaust pipe hanger rod . Remove the exhaust pipe hanger gently from each of the frame support bracket rod and exhaust pipe hanger rod . The installation needs a soapy solution on the frame support bracket rod and exhaust pipe hanger and exhaust pipe hanger rod surfaces to make the procedure smoother. Lower the vehicle while directing the exhaust pipe hanger onto the frame support bracket rod and also the exhaust pipe hanger rod simultaneously.

How to service and repair the Exhaust Hanger on GMC Envoy?

Service and repair operations for Exhaust Pipe/muffler hangers start with raising the vehicle. Start by disconnecting the heated Oxygen Sensor (H2OS) electrical connector before removing both nuts that hold the Catalytic Converter pipe to the Exhaust Manifold. Discard the old exhaust seal because it should not be used again. To begin the process remove the nuts holding the muffler to the Catalytic Converter pipe followed by the hanger bolt which attaches to the transmission mount then unfasten the transmission mount itself. Remove the Catalytic Converter assembly with next the Exhaust Hanger from the vehicle while separating the Exhaust Hanger from the converter. First put on the Exhaust Hanger to the Catalytic Converter before reinstalling the converter and hanger assembly into the vehicle. Begin by attaching the bolt which anchors the Catalytic Converter pipe hanger to the transmission mount, finish installation by tightening the bolt to 30 nm (22 ft. Lbs.), then put on the transmission mount. Use a new exhaust seal between the Exhaust Manifold and Catalytic Converter pipe before evenly applying nut torque against the exhaust flange until secure and finally tightening the nuts to 50 nm (37 ft. Lbs.). Finish the repair by connecting the h2os electrical connector followed by putting the vehicle into its normal position.

How to Service and Repair the Exhaust Hanger, Muffler Insulator, and Bracket on GMC Yukon?

The maintenance of an exhaust muffler insulator, hanger and bracket requires first lifting and supporting your vehicle. Protective goggles as well as gloves are essential equipment for safety purposes. The service of exhaust system insulators must be done one at a time to preserve exhaust system support while keeping oil-based lubricants out of use. Apply spray lubricant to the exhaust system insulators at the connection points with the frame hangers to improve their removal process. Start by taking out Exhaust Pipe insulators (1 and 2) while keeping the exhaust system in position with an adjustable jack (when replacing exhaust muffler insulators (3 and 4)). Afterwards detach the exhaust system insulators (3 and 4) which are installed on the frame hangers. The hanger area requires lubricant application before placing insulators on it. Begin installation of the Exhaust Pipe insulators (1 and 2) to the frame hangers followed by the exhaust muffler insulators (3 and 4) to the frame hangers and muffler pipe. After this end the adjustable jack stand. An exhaustive check should determine that the exhaust system maintains its correct position and space requirements.

OEM GMC Exhaust Hanger

Exhaust Tail Pipe Hanger

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

101 Exhaust Hangers found

View related parts
GMC Muffler Hanger
Part Number: 22659362
$19.24 MSRP: $28.64
You Save: $9.40 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushing, Exhaust Muffler/Resonator; Exhaust Insulator; Exhaust Bracket; Exhaust Hanger; Converter, Muffler, Pipe, Intermed, Resonator, Front Insulators & Hangers; Catalytic Converter, Exhaust
- Position: Rear
Fits the following GMC Models:
- Terrain | 2010-2017 | Denali, SL, SLE, SLT | 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
GMC Converter & Pipe Insulator
Part Number: 15120136
$18.17 MSRP: $27.05
You Save: $8.88 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator, Catalytic Converter; Exhaust Insulator; Exhaust Hanger; Muffler W/Tpipe Insulator; Tailpipe Hanger; Exhaust Muffler/Resonator Insulator; Exhaust Pipe Insulator
- Replaces: 15083302, 15155259
Fits the following GMC Models:
- Canyon | 2015-2022, 2004-2012 | All Terrain, AT4, Base, Denali, Elevation, Elevation Standard, SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.5 L GAS, 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 5.3 L GAS
- Envoy | 2002-2009 | Denali, SLE, SLT | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
- Envoy XL | 2002-2006 | Denali, SLE, SLT | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
- Envoy XUV | 2004-2005 | SLE, SLT | 6 Cyl 4.2 L GAS
View More
View related parts
GMC Converter & Pipe Bracket
Part Number: 23471501
$28.76 MSRP: $42.80
You Save: $14.04 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket, Exhaust Pipe; Exhaust Bracket; Exhaust Hanger; Bracket
- Position: Front
- Replaces: 25800916
Fits the following GMC Models:
- Terrain | 2010-2017 | Denali, SL, SLE, SLT | 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS
View related parts
GMC Converter & Pipe Insulator
Part Number: 23469850
$20.63 MSRP: $30.70
You Save: $10.07 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator-Exhaust System; Exhaust Insulator; Exhaust Bracket; Exhaust Hanger; Center Muffler Insulator; Muffler & Pipe Insulator; Exhaust Pipe Insulator; Hanger Insulator; Muffler W/Tpipe Hanger.
Fits the following GMC Models:
- Canyon | 2016-2023 | All Terrain, AT4, AT4X, Base, Denali, Elevation, Elevation Standard, SLE, SLT | 4 Cyl 2.7 L GAS, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.6 L GAS
- Savana 2500 | 2018-2024 | Base, LS, LT | 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS
- Savana 3500 | 2018-2024 | Base, LS, LT | 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS
- Sierra 1500 | 2019-2023 | AT4, AT4X, Base, Denali, Denali Ultimate, Elevation, Pro, SLE, SLT | 4 Cyl 2.7 L GAS, 6 Cyl 3.0 L DIESEL, 6 Cyl 4.3 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L GAS
- Sierra 2500 HD | 2015-2024 | AT4, AT4X, Base, Denali, Denali Ultimate, Pro, SLE, SLT | 8 Cyl 6.6 L DIESEL
- Sierra 3500 HD | 2015-2024 | AT4, Base, Denali, Denali Ultimate, Pro, SLE, SLT | 8 Cyl 6.6 L DIESEL
- Yukon | 2021-2023 | AT4, Denali, SLE, SLT | 6 Cyl 3.0 L DIESEL, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L GAS
- Yukon XL | 2021-2023 | AT4, Denali, SLE, SLT | 6 Cyl 3.0 L DIESEL, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L GAS
View More
View related parts
GMC Hanger
Part Number: 85654521
$84.17 MSRP: $125.26
You Save: $41.09 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hanger, Exhaust Tail Pipe
Fits the following GMC Models:
- Canyon | 2023 | AT4, AT4X, Denali, Elevation | 4 Cyl 2.7 L GAS
View related parts
GMC Catalytic Converter Lower Bracket
Part Number: 12672003
$65.32 MSRP: $97.20
You Save: $31.88 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket, Catalytic Converter; Exhaust Bracket; Exhaust Hanger; Catalytic Converter Lower Brace
Fits the following GMC Models:
- Terrain | 2018-2020 | Denali, SLE, SLT | 4 Cyl 2.0 L GAS
View related parts
GMC Converter & Pipe Hanger, Front
Part Number: 84317051
$20.25 MSRP: $30.14
You Save: $9.89 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket Assembly-Exhaust Front; Exhaust Hanger; Bracket, Exhaust Pipe
- Position: Front
- Replaces: 23214836
Fits the following GMC Models:
- Canyon | 2017-2022 | All Terrain, AT4, Base, Denali, Elevation, Elevation Standard, SLE, SLT | 6 Cyl 3.6 L GAS
View related parts
GMC Muffler W/Tpipe Hanger
Part Number: 84225604
$28.68 MSRP: $42.67
You Save: $13.99 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hanger, Exhaust Muffler/Resonator; Exhaust Bracket; Exhaust Hanger
Fits the following GMC Models:
- Savana 2500 | 2017-2022 | Base, LS, LT | 4 Cyl 2.8 L DIESEL
- Savana 3500 | 2017-2022 | Base, LS, LT | 4 Cyl 2.8 L DIESEL
View related parts
GMC Exhaust Pipe Lower Bracket
Part Number: 12657320
$28.40 MSRP: $42.25
You Save: $13.85 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket, Exhaust Pipe
- Position: Front
- Replaced by: 12729776
Fits the following GMC Models:
- Sierra 2500 HD | 2020-2024 | AT4, AT4X, Base, Denali, Denali Ultimate, Pro, SLE, SLT | 8 Cyl 6.6 L DIESEL
- Sierra 3500 HD | 2020-2024 | AT4, Base, Denali, Denali Ultimate, Pro, SLE, SLT | 8 Cyl 6.6 L DIESEL
View related parts
GMC Converter & Pipe Hanger, Front
Part Number: 84263421
$6.28 MSRP: $9.34
You Save: $3.06 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket Assembly-Exhaust Front; Exhaust Hanger; Bracket, Exhaust Pipe
- Position: Front
Fits the following GMC Models:
- Sierra 2500 HD | 2020-2024 | AT4, AT4X, Base, Denali, Denali Ultimate, Pro, SLE, SLT | 8 Cyl 6.6 L DIESEL
- Sierra 3500 HD | 2020-2024 | AT4, Base, Denali, Denali Ultimate, Pro, SLE, SLT | 8 Cyl 6.6 L DIESEL
View related parts
GMC Converter & Pipe Insulator
Part Number: 15860245
$37.61 MSRP: $55.97
You Save: $18.36 (33%)
ADD TO CART
Product Specifications
- Other Name: Insulator Assembly-Exhaust Pipe Hanger; Exhaust Insulator; Exhaust Hanger; Front Pipe Insulator; Insulator, Exhaust Pipe
- Replaces: 15063121, 15032391
Fits the following GMC Models:
- Sierra 2500 HD | 2007-2010, 2001-2004 | Base, SL, SLE, SLT, WT | 8 Cyl 6.6 L DIESEL
- Sierra 3500 | 2001-2004 | Base, SL, SLE, SLT, WT | 8 Cyl 6.6 L DIESEL
- Sierra 3500 HD | 2007-2010 | SLE, SLT, WT | 8 Cyl 6.6 L DIESEL
- Yukon XL 2500 | 2007-2008 | SLE, SLT | 8 Cyl 6.0 L GAS
View More
View related parts
GMC Converter & Pipe Hanger
Part Number: 23319270
$20.70 MSRP: $30.81
You Save: $10.11 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hanger Assembly-Exhaust Front; Exhaust Hanger; Hanger, Exhaust Pipe
- Position: Front
- Replaces: 23143586
Fits the following GMC Models:
- Canyon | 2015-2022 | Base, Elevation, Elevation Standard, SL, SLE, SLT | 4 Cyl 2.5 L GAS
View related parts
GMC Rear Hanger, Driver Side
Part Number: 84697277
$25.73 MSRP: $40.28
You Save: $14.55 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator Assembly-Exhaust Rear Muffler; Exhaust Insulator; Exhaust Hanger; Muffler & Pipe Insulator; Muffler & Pipe Hanger; Insulator, Exhaust Muffler/Resonator
- Position: Rear Driver Side
- Replaced by: 85154360
Fits the following GMC Models:
- Acadia | 2017-2023 | AT4, Denali, SLE, SLT | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS
View related parts
GMC Hanger
Part Number: 25811717
$35.65 MSRP: $53.04
You Save: $17.39 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket Assembly-Exhaust Pipe Hanger; Exhaust Hanger; Bracket, Exhaust Pipe
Fits the following GMC Models:
- Sierra 2500 HD | 2011-2019 | Base, Denali, SLE, SLT, WT | 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS
- Sierra 3500 HD | 2011-2019 | Base, Denali, SLE, SLT, WT | 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS
View related parts
GMC Converter & Pipe Bracket
Part Number: 12696096
$13.16 MSRP: $19.59
You Save: $6.43 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket, Catalytic Converter; Exhaust Bracket; Exhaust Hanger
Fits the following GMC Models:
- Yukon | 2021-2023 | Denali, SLE, SLT | 6 Cyl 3.0 L DIESEL
- Yukon XL | 2021-2023 | Denali, SLE, SLT | 6 Cyl 3.0 L DIESEL
View related parts
GMC Rear Hanger, Passenger Side
Part Number: 84697276
$33.38 MSRP: $49.67
You Save: $16.29 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator Assembly-Exhaust Rear Muffler; Exhaust Insulator; Exhaust Hanger; Muffler & Pipe Insulator; Muffler & Pipe Hanger; Insulator, Exhaust Muffler/Resonator
- Position: Rear Passenger Side
- Replaced by: 85154361
Fits the following GMC Models:
- Acadia | 2017-2023 | AT4, Denali, SL, SLE, SLT | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.6 L GAS
View related parts
GMC Converter & Pipe Bracket, Front
Part Number: 12694290
$17.95 MSRP: $26.72
You Save: $8.77 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket Assembly-Exhaust Front; Exhaust Hanger; Bracket, Exhaust Pipe
- Position: Front
Fits the following GMC Models:
- Sierra 1500 | 2019-2023 | Base, Elevation, Pro, SLE | 4 Cyl 2.7 L GAS
View related parts
GMC Catalytic Converter Bracket
Part Number: 55589486
$11.98 MSRP: $17.84
You Save: $5.86 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket-Catalytic Converter; Exhaust Bracket; Exhaust Hanger; Bracket, Catalytic Converter
Fits the following GMC Models:
- Canyon | 2016-2022 | All Terrain, AT4, Denali, Elevation, SLE, SLT | 4 Cyl 2.8 L DIESEL
View related parts
GMC Converter & Pipe Hanger
Part Number: 23211363
$10.12 MSRP: $15.07
You Save: $4.95 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hanger, Exhaust Muffler/Resonator; Exhaust Hanger
- Replaced by: 23319268
Fits the following GMC Models:
- Canyon | 2015 | Base, SL, SLE, SLT | 4 Cyl 2.5 L GAS
View related parts
GMC Mount Bracket
Part Number: 15985594
Product Specifications
- Other Name: Bracket, Catalytic Converter; Exhaust Bracket; Exhaust Hanger
Fits the following GMC Models:
- Sonoma | 1996-1997 | SL, SLE, SLS | 6 Cyl 4.3 L GAS

| Page 1 of 6 |Next >

1-20 of 101 Results

GMC Exhaust Hanger Parts Questions & Experts Answers

Converter & Pipe Insulator
15120136
Q: How to service the exhaust hangers and ensure the support of the exhaust system on GMC Canyon?
A: The first step is to safely raise and support the vehicle while using protective goggles and gloves during service to exhaust hangers and support of the exhaust system. The entire process must avoid the use of oil-based lubrication. A solution of soap becomes essential for hanger removal since it should be applied to both the frame support bracket rod and the exhaust pipe hanger rod . Remove the exhaust pipe hanger gently from each of the frame support bracket rod and exhaust pipe hanger rod . The installation needs a soapy solution on the frame support bracket rod and exhaust pipe hanger and exhaust pipe hanger rod surfaces to make the procedure smoother. Lower the vehicle while directing the exhaust pipe hanger onto the frame support bracket rod and also the exhaust pipe hanger rod simultaneously.
Insulator
15120137
Q: How to service and repair the Exhaust Hanger on GMC Envoy?
A: Service and repair operations for Exhaust Pipe/muffler hangers start with raising the vehicle. Start by disconnecting the heated Oxygen Sensor (H2OS) electrical connector before removing both nuts that hold the Catalytic Converter pipe to the Exhaust Manifold. Discard the old exhaust seal because it should not be used again. To begin the process remove the nuts holding the muffler to the Catalytic Converter pipe followed by the hanger bolt which attaches to the transmission mount then unfasten the transmission mount itself. Remove the Catalytic Converter assembly with next the Exhaust Hanger from the vehicle while separating the Exhaust Hanger from the converter. First put on the Exhaust Hanger to the Catalytic Converter before reinstalling the converter and hanger assembly into the vehicle. Begin by attaching the bolt which anchors the Catalytic Converter pipe hanger to the transmission mount, finish installation by tightening the bolt to 30 nm (22 ft. Lbs.), then put on the transmission mount. Use a new exhaust seal between the Exhaust Manifold and Catalytic Converter pipe before evenly applying nut torque against the exhaust flange until secure and finally tightening the nuts to 50 nm (37 ft. Lbs.). Finish the repair by connecting the h2os electrical connector followed by putting the vehicle into its normal position.
Muffler Insulator
15092802
Q: How to Service and Repair the Exhaust Hanger, Muffler Insulator, and Bracket on GMC Yukon?
A: The maintenance of an exhaust muffler insulator, hanger and bracket requires first lifting and supporting your vehicle. Protective goggles as well as gloves are essential equipment for safety purposes. The service of exhaust system insulators must be done one at a time to preserve exhaust system support while keeping oil-based lubricants out of use. Apply spray lubricant to the exhaust system insulators at the connection points with the frame hangers to improve their removal process. Start by taking out Exhaust Pipe insulators (1 and 2) while keeping the exhaust system in position with an adjustable jack (when replacing exhaust muffler insulators (3 and 4)). Afterwards detach the exhaust system insulators (3 and 4) which are installed on the frame hangers. The hanger area requires lubricant application before placing insulators on it. Begin installation of the Exhaust Pipe insulators (1 and 2) to the frame hangers followed by the exhaust muffler insulators (3 and 4) to the frame hangers and muffler pipe. After this end the adjustable jack stand. An exhaustive check should determine that the exhaust system maintains its correct position and space requirements.