When changing the right side instrument panel electrical center or junction block, first remove the right end panel. Push in on the tabs to detach the fuse block, pull it out to access and loosen the retaining bolt. Unplug a screwdriver and separate the wire harness block with the fuse block and then disjoin the I/P wiring harness block with the car. For installation, install the fuse block to the I/P wire harness block remembering to refer to the Fastener Notice for proper precautions. Fit and tighten the retaining bolt to 6 N.m (53 lb in), and firmly attach the fuse block to the I/P until they click securely in place. Connect the wiring connectors to the fuse block, ensuring the connections are correct then finally, re-fix the right side end panel.