Other Name: Trans Mount; Engine Mount Torque Strut; Engine Mount Bracket; Transfer Case Mount; Motor Mount; Rear Mount; Mount; Mount, Transmission Mounting
Replaces: 15750514, 15683966, 15022551
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
1984-1994 GMC Jimmy | Base, High Sierra, Sierra Classic, SLE, SLS, SLT | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL
Other Name: Bracket, Engine Mounting; Engine Mount Torque Strut; Engine Mount Bracket; Motor Mount; Mount; Mount, Engine Mount Dampening; Mount, Engine Mounting
Replaces: 22145334
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
1984-1991 GMC Jimmy | Base, High Sierra, Sierra Classic | 8 Cyl 6.2 L DIESEL
Other Name: Trans Mount; Engine Mount Torque Strut; Engine Mount Bracket; Transfer Case Mount; Transmission Mount; Transmission Mount Bracket; Rear Mount; Mount; Mount, Transmission Mounting
Other Name: Bracket, Engine Mounting; Engine Mount Bracket; Motor Mount; Motor Mount Bracket; Front Mount Bracket
Position: Driver Side
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
1992-1995 GMC Jimmy | Base, SL, SLE, SLS, SLT | 6 Cyl 4.3 L GAS
GMC Jimmy Motor And Transmission Mount
Our website offers an extensive catalog of genuine GMC Jimmy Motor And Transmission Mount at unbeatable prices. Every OEM GMC Jimmy Motor And Transmission Mount comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
GMC Jimmy Motor And Transmission Mount Parts Questions & Experts Answers
Q: How to replace the Motor and Transmission Mount on the NV 3500 manual transmission on GMC Jimmy?
A: For the replacement of the transmission mount on nv 3500 the manual transmission, first, raise and support the vehicle. Lose the nut that secures the rear Engine Mount to the transmission support, then do the same to the support to transmission bolts. With a proper jack use to lift the transmission just high enough to take out the mount and then remove the mount. For installing the new mount put it in place and install the transmission mount to transmission bolts. Lower the transmission and tighten the bolt to 50 nm (37 ft. Lbs), then put the nut that attaches the rear Engine Mount to the transmission support and tighten to 45 nm (33 ft. Lbs). Finally, lower the vehicle.