Make sure this part fits

GM 15138296
Motor Mount

1996-2005 GM

Customer Questions & Expert Answers (17)
GM 15138296 Motor Mount
  • Part Description
    Mount; Engine Mount Bracket; Engine Mount
  • Replaces
    22173023
  • Manufacturer
    General Motors
Make sure this part fits
$76.42 MSRP: $130.10
You Save: $53.68 (42%)
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    1996-2005 Chevrolet BlazerBase, LS, LT, Trailblazer, Xtreme, ZR26 Cyl 4.3 L GAS
    1996-2004 Chevrolet S10Base, LS, SS, Xtreme, ZR2, ZR56 Cyl 4.3 L GAS
    1996-2001 GMC JimmyBase, Diamond Edition, Envoy, SL, SLE, SLS, SLT6 Cyl 4.3 L GAS
    1996-2004 GMC SonomaSL, SLE, SLS6 Cyl 4.3 L GAS
    1996-2004 Oldsmobile BravadaBase6 Cyl 4.2 L GAS, 6 Cyl 4.3 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 15138296 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 15138296 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the first step to replace the left engine mount bracket for the 2004 Chevrolet Blazer? Posted by Customer
    A:
    First, remove the engine mount.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    How should the engine mount frame bracket be installed for the 2005 Chevrolet Blazer? Posted by Customer
    A:
    Install the engine mount frame bracket to the frame, securing it with bolts tightened to 45 Nm (33 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What should be done after removing the mounting bolts for the 2005 Chevrolet Blazer? Posted by Customer
    A:
    Lift the transmission just enough to detach the mount and then remove the transmission mount from the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    How do you remove the engine mount through-bolt and nut for the 2004 Chevrolet Blazer? Posted by Customer
    A:
    Remove the engine mount through-bolt and nut for the side being replaced.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What should you do after lowering the engine for the 2002 Chevrolet S10? Posted by Customer
    A:
    Remove the jack and install the engine mount through-bolts and nuts.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What is the first step for installation of the new transmission mount for the 2002 Chevrolet S10? Posted by Customer
    A:
    Position the new transmission mount.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    What should be done after supporting the transmission for the 2003 Chevrolet S10? Posted by Customer
    A:
    Remove the transmission mount to the transmission support retaining nut and raise the transmission to relieve the weight on the mount.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    What is the final step if the starter was removed for the 2002 Chevrolet S10? Posted by Customer
    A:
    Reinstall the starter if it was removed and lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What is the next step after checking the bolts for the 2001 GMC Jimmy? Posted by Customer
    A:
    Remove the starter to access the square tab on the right side of the engine.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What is the first step to replace the left engine mount for the 2000 GMC Jimmy? Posted by Customer
    A:
    Raise the vehicle and remove any underbody shields if present.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What should be done after securing the new mount for the 2001 GMC Jimmy? Posted by Customer
    A:
    Lower the transmission and install the nut holding the rear engine mount to the transmission support, tightening it to 45 Nm (33 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    How do you attach the engine mount frame bracket for the 2000 GMC Jimmy? Posted by Customer
    A:
    Attach the engine mount frame bracket to the frame and tighten the bracket bolts to 45 Nm (33 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What should be done after tightening the transmission mount for the 2001 GMC Jimmy? Posted by Customer
    A:
    Install the nut holding the rear engine mount to the transmission support and tighten it to 45 Nm (33 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    What is the first step in the installation process for the 2003 GMC Sonoma? Posted by Customer
    A:
    Install the transmission mount to the vehicle, ensuring to follow the Fastener Notice in Service Precautions.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    How do you prepare for installation for the 2003 GMC Sonoma? Posted by Customer
    A:
    Sub-assemble the engine mount, shield, and one bolt, then install the engine mount and shield to the engine.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What should be done after installing the transmission mount to the adapter for the 2003 GMC Sonoma? Posted by Customer
    A:
    Lower the transmission and install the transmission mount to the transmission support retaining nut or nuts, tightening them to 57 Nm (42 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Motor Mount 15138296 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 15138296 Motor Mount is available in the market under the name GM Engine Mount, Motor And Transmission Mount. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 15138296 Motor Mount fits certain Chevrolet S10, Blazer models, as well as GMC Sonoma, Jimmy. Additionally, it is compatible with Oldsmobile Bravada models.
The original GM component designated by manufacturer part number 15138296 maintains top performance when functioning as the Mount; Engine Mount Bracket; Engine Mount unit. The component 15138296 is constructed from durable material and its dimensions span 4.8 x 4.8 x 3.6 inches while weighing 2.90 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Front Mount; Mount, Engine Mount Dampening; Mount, Engine Mounting. The part 15138296 has available replacement options 22173023. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.