Make sure this part fits

GM 19417972
Vibration Damper

1992-2014 GM

Customer Questions & Expert Answers (26)
GM 19417972 Vibration Damper
  • Part Description
    Shaft Assembly, Balancer (Remanufacture); Harmonic Balancer
  • Replaces
    10224538
  • Manufacturer
    General Motors
Make sure this part fits
$409.58 MSRP: $650.30
You Save: $240.72 (38%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number19417972
    Part DescriptionShaft Assembly, Balancer (Remanufacture); Harmonic Balancer
    Other NamesBalance Shaft; Balancer Shaft Kit; Engine Crankshaft and Camshaft Balancer.
    Item Dimensions4.2 x 4.2 x 26.5 inches
    Item Weight5.20 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces10224538
    ManufacturerGeneral Motors
    SKU19417972
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    1993-2005 Chevrolet AstroBase, CL, CS, LS, LT6 Cyl 4.3 L GAS
    1995-2005 Chevrolet BlazerBase, LS, LT, Trailblazer, Xtreme, ZR26 Cyl 4.3 L GAS
    1996-1998 Chevrolet C1500Base, Cheyenne, Silverado, WT6 Cyl 4.3 L GAS
    1996-2014 Chevrolet Express 1500Base, LS, LT6 Cyl 4.3 L GAS
    1996-2006 Chevrolet Express 2500Base, LS6 Cyl 4.3 L GAS
    1996 Chevrolet G30Chevy Van6 Cyl 4.3 L GAS
    1996-1998 Chevrolet K1500Base, Cheyenne, Silverado, WT6 Cyl 4.3 L GAS
    1992-2004 Chevrolet S10Base, EL, LS, SS, Tahoe, Xtreme, ZR2, ZR56 Cyl 4.3 L GAS
    1992-1994 Chevrolet S10 BlazerBase, LT, Sport, Tahoe, Tahoe LT6 Cyl 4.3 L GAS
    1999-2013 Chevrolet Silverado 1500Base, LS, LT, WT6 Cyl 4.3 L GAS
    View More
  • Customer Questions & Expert Answers

    Q:
    Is this 19417972 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 19417972 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be done if reusing the crankshaft front cover oil seal for the 2000 Chevrolet Astro? Posted by Customer
    A:
    Apply a small amount of grease to its sealing surface before installing the crankshaft balancer.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Harmonic Balancer
    Q:
    What should you do after removing the crankshaft balancer for the 2005 Chevrolet Blazer? Posted by Customer
    A:
    Clean and inspect the crankshaft balancer for any damage.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Harmonic Balancer
    Q:
    How do you secure the new crankshaft balancer for the 2004 Chevrolet Blazer? Posted by Customer
    A:
    Tighten the J 23523-F plate bolts to 25 Nm (18 ft. lbs.), install the J 23523-F screw, bearing, washer, and nut, and rotate the nut until the balancer hub is seated against the crankshaft position sensor reluctor ring.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Harmonic Balancer
    Q:
    What adhesive should be applied during installation for the 2002 Chevrolet Express 2500? Posted by Customer
    A:
    Apply adhesive GM P/N 12346141 or equivalent onto the crankshaft balancer keyway.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Harmonic Balancer
    Q:
    What should be removed after disconnecting the battery for the 2005 Chevrolet Express 2500? Posted by Customer
    A:
    Remove the fan shroud assembly and take off the drive belt.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Harmonic Balancer
    Q:
    How should the crankshaft balancer bolt be installed for the 2004 Chevrolet Express 1500? Posted by Customer
    A:
    Install the used crankshaft balancer bolt and tighten it to 330 Nm (240 ft. lbs.), then remove it.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Harmonic Balancer
    Q:
    What should be applied to the crankshaft front cover seal if it is being reused for the 2009 Chevrolet Silverado 1500? Posted by Customer
    A:
    Apply grease to the crankshaft front cover seal.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Harmonic Balancer
    Q:
    What preparation is needed before installing the new balancer for the 2007 Chevrolet Silverado 1500 Classic? Posted by Customer
    A:
    Apply a small amount of grease to the crankshaft front cover seal sealing surface if reusing the seal, ensuring the balancer weight(s) are in the correct location.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Harmonic Balancer
    Q:
    What is the procedure for installing the crankshaft balancer for the 2008 Chevrolet Silverado 1500? Posted by Customer
    A:
    Install the J 23523-F plate and bolts onto the crankshaft balancer, tightening them to 25 N.m (18 lb ft), then insert the forcing screw and rotate it clockwise to remove the balancer.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Harmonic Balancer
    Q:
    How should the balancer bolt be tightened for the 2002 Chevrolet S10? Posted by Customer
    A:
    Tighten the balancer bolt to 95 Nm (70 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Harmonic Balancer
    Q:
    What is the first step to service and repair the crankshaft balancer for the 2000 GMC Savana 3500? Posted by Customer
    A:
    Disconnect the battery negative cable.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Harmonic Balancer
    Q:
    What is the torque specification for tightening the bolts during installation for the 2001 GMC Savana 1500? Posted by Customer
    A:
    Tighten them to 25 Nm (18 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Harmonic Balancer
    Q:
    How do you ensure the balancer is correctly installed for the 2003 GMC Savana 2500? Posted by Customer
    A:
    Measure to ensure the balancer is correctly installed; if not, repeat the installation procedure using the J 41665.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Harmonic Balancer
    Q:
    What should be done after removing the J 23523-F for the 2001 GMC Jimmy? Posted by Customer
    A:
    Install the crankshaft pulley and bolts, tightening them to 58 Nm (43 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Harmonic Balancer
    Q:
    What should be reinstalled after the crankshaft balancer for the 2002 GMC Savana 3500? Posted by Customer
    A:
    Reinstall the drive belt and the fan shroud assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Harmonic Balancer
    Q:
    What is the final step after completing the installation for the 2007 GMC Sierra 1500? Posted by Customer
    A:
    Reinstall the cooling fan and drive belt.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Harmonic Balancer
    Q:
    What should be done after installing the crankshaft balancer for the 2002 GMC Safari? Posted by Customer
    A:
    Reinstall the drive belt.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Harmonic Balancer
    Q:
    What is the final step in the process for the 2003 GMC Safari? Posted by Customer
    A:
    Reinstall the fan shroud assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Harmonic Balancer
    Q:
    What are the steps after pressing the balancer onto the crankshaft for the 2007 GMC Sierra 1500 Classic? Posted by Customer
    A:
    Install the J 23523-F plate and bolts, tightening them to 25 Nm (18 ft. lbs.), then install the J 23523-F forcing screw, bearing, washer, and nut, rotating the nut clockwise until the balancer hub is seated against the crankshaft position sensor reluctor ring.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Harmonic Balancer
    Q:
    What is the first step to replace the crankshaft balancer for the 2003 GMC Sonoma? Posted by Customer
    A:
    Disconnect the negative battery cable and remove the fan shroud assembly and drive belt.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Harmonic Balancer
    Q:
    What is the final step for the crankshaft balancer bolt for the 2005 GMC Savana 2500? Posted by Customer
    A:
    Install a new crankshaft balancer bolt, tightening it first to 50 Nm (37 ft. lbs.) and then to 140 degrees using the J 45059.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Harmonic Balancer
    Q:
    What is the first step to service and repair the crankshaft balancer for the 2000 GMC Jimmy? Posted by Customer
    A:
    Disconnect the battery negative cable.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Harmonic Balancer
    Q:
    How should the balancer be installed onto the crankshaft for the 2006 GMC Sierra 1500? Posted by Customer
    A:
    Align the keyway with the crankshaft balancer key and install the balancer onto the crankshaft.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Harmonic Balancer
    Q:
    How should the new balancer be installed for the 2010 GMC Sierra 1500? Posted by Customer
    A:
    Apply adhesive to the crankshaft balancer keyway, align it with the crankshaft key, and press the balancer onto the crankshaft using the J 23523-F.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Harmonic Balancer
    Q:
    What is the procedure for installing the crankshaft balancer for the 2009 GMC Sierra 1500? Posted by Customer
    A:
    Position the balancer onto the crankshaft, then use the J 41665 (Crankshaft Balancer and Sprocket Installer) and the threaded rod from the J 41478 (Crankshaft Front Oil Seal Installer) to install the balancer.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Harmonic Balancer
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 19417972, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 19417972 Vibration Damper. It is sometimes referred to as GM Harmonic Balancer. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 19417972 Vibration Damper. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Chevy parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery