OEM GMC Safari Air Bag Clockspring

GMC Safari Air Bag Clockspring Parts Questions & Experts Answers

• Clockspring
  19330850
  Q: How to replace the Air Bag Clockspring in the Steering Wheel on GMC Safari?

  A:

  In order to replace the air bag clock spring, have to first disable the sir system. Uncover the steering column trim covers and then unbolt the wire harness assembly from the wire harness strap and unbolt the three wire harness straps from the wire harness assembly. Next, remove the wire harness strap from the upper tilt head assembly and remove the sir air bag clock spring retaining clip followed by the sir air bag clock spring. Additionally, take off the wave washer from the steering column upper shaft. For installation, mounted the figure toeoh on the high continuous at the 00 the exact time and complete all fastenings in advance as the required topping to prevent damage to the components. Mount the wave washer onto the steering column upper shaft, so that the sir air bag clock spring is centered, as it can be discentered when the steering column is separated from the steering gear, or the centering spring is compressed. Adjust the sir air bag clock spring with the horn tower of the turn signal cancel cam and attach the pre-centered sir air bag clock spring onto the steering column upper shaft. Terminate and remove centering tab and pull on the lower coil assembly wire to get rid of any kinks ensuring you are left with no kinks or bends that could interfere with the shaft lock mechanism. Equip the sir air bag clock spring retaining ring firmly in the groove on the upper shaft. While replacing the wire harness assembly into the wire strap then wire harness strap into the wire strap, and finally attaching the wire harness straps to the wire harness assembly. After that, install back the steering column trims covers and activate the sir system.