How to replace the lower control arm ball joint on GMC Savana 1500?

Before you start work on the lower Control Arm Ball Joint you must lift and stabilize the vehicle. Take off the tire and wheel before going ahead. Take out the lower Control Arm according to proper methods for rear-wheel drive or 4-wheel drive. Secure the lower Control Arm on the bench vice and strike 4 securing crimps from the Ball Joint body with a chisel. Put the Ball Joint in the press to remove it from the lower Control Arm. The new Ball Joint needs to be installed into place using the outer flange as a fixture. Position the lower Control Arm in a bench vice and use a punch and the original joint as references to install 4 crimps on the Ball Joint. Put back the lower Control Arm and position the tire and wheel after it. Lower your vehicle and inspect its wheel alignment at the end of the process.

OEM GMC Savana 1500 Ball Joint

Control Arm Joint

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Ball Joints found

View related parts
GMC Savana 1500 Lower Ball Joint, Front
Part Number: 12475478
$103.35 MSRP: $161.18
You Save: $57.83 (36%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Stud Kit, Front Lower Control Arm Ball; Suspension Ball Joint; Ball Joint; Stud Kit, Steering Knuckle Lower Control Arm Pivot
- Position: Front Lower
- Replaces: 12472819
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2014 GMC Savana 1500 | Base, LS, LT, SLE | 6 Cyl 4.3 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
View related parts
GMC Savana 1500 Lower Ball Joint, Front
Part Number: 19416896
$88.06 MSRP: $145.05
You Save: $56.99 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Stud Kit, Front Lower Control Arm Ball; Ball Joint; Stud Kit, Steering Knuckle Lower Control Arm Pivot; Stud Kit, Front Wheel Lower Control Arm
- Position: Front Lower
- Replaces: 12480852, 15659724
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996-2002 GMC Savana 1500 | Base, SLE, SLT | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
View related parts
GMC Savana 1500 Lower Ball Joint, Front
Part Number: 19210782
$46.25 MSRP: $112.83
You Save: $66.58 (60%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Stud Kit, Front Lower Control Arm Ball; Suspension Ball Joint; Ball Joint; Stud Kit, Steering Knuckle Lower Control Arm Pivot; Joint, Steering Knuckle Lower Control Arm Pivot
- Position: Front Lower
- Replaces: 88982337
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2014 GMC Savana 1500 | Base, LS, LT, SLE | 6 Cyl 4.3 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
View related parts
GMC Savana 1500 Upper Ball Joint
Part Number: 19146901
Product Specifications
- Other Name: Hose, Power Steering Gear Inlet; Ball Joint; Upper Ball Joints; Stud Kit, Steering Knuckle Upper Control Arm
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996-2002 GMC Savana 1500 | Base, SLE, SLT | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS

GMC Savana 1500 Ball Joint

Our website offers an extensive catalog of genuine GMC Savana 1500 Ball Joint at unbeatable prices. Every OEM GMC Savana 1500 Ball Joint comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

GMC Savana 1500 Ball Joint Parts Questions & Experts Answers

Lower Ball Joint, Front
12475478
Q: How to replace the lower control arm ball joint on GMC Savana 1500?
A: Before you start work on the lower Control Arm Ball Joint you must lift and stabilize the vehicle. Take off the tire and wheel before going ahead. Take out the lower Control Arm according to proper methods for rear-wheel drive or 4-wheel drive. Secure the lower Control Arm on the bench vice and strike 4 securing crimps from the Ball Joint body with a chisel. Put the Ball Joint in the press to remove it from the lower Control Arm. The new Ball Joint needs to be installed into place using the outer flange as a fixture. Position the lower Control Arm in a bench vice and use a punch and the original joint as references to install 4 crimps on the Ball Joint. Put back the lower Control Arm and position the tire and wheel after it. Lower your vehicle and inspect its wheel alignment at the end of the process.