Other Name: Shaft Assembly-Front Axle Propeller; Driveshaft; Shaft, Propeller
Position: Front
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2012-2014 GMC Savana 2500 | Base, LS, LT | 8 Cyl 4.8 L FLEX, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.6 L DIESEL
GMC Savana 2500 Drive Shaft
Our website offers an extensive catalog of genuine GMC Savana 2500 Drive Shaft at unbeatable prices. Every OEM GMC Savana 2500 Drive Shaft comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
GMC Savana 2500 Drive Shaft Parts Questions & Experts Answers
Q: How to replace a two-piece drive shaft on GMC Savana 2500?
A: You should start replacement work on a two-piece propeller shaft by supporting it with safety stands after raising the vehicle. The replacement process begins with removing the center bearing bolts from the bracket and the center bearing afterward. Next step includes the hanger bolts and the propeller shaft hanger itself. After removing both bolts and yoke retainers from the rear axle pinion yoke you must disconnect the propeller shaft from this component. Complete the transmission propeller shaft removal by sliding it toward the back. Start by connecting the propeller shaft to the rear axle pinion yoke and secure the bolts and yoke retainers to the same yoke and tighten them to 25 nm (18 lb ft). Install the propeller shaft hanger before tightening its hanger bolts to 52 nm (38 lb ft). The center bearing needs installation onto the bracket while center bearing bolts secure the unit with a torque force of 40 nm (30 lb ft). Finish the process by first removing safety stands and then lowering the car to the ground.