Other Name: Bearing Assembly, Differential Drive Pinion Gear Outer; Differential Pinion Bearing; Front Pinion Bearing; Bearing, Differential Pinion; Bearing, Pinion Shaft Front
Position: Outer
Replaces: 09440836, 9440836
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2003-2010 GMC Savana 2500 | Base, LS, LT, SLE | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
GMC Savana 2500 Differential Bearing
Our website offers an extensive catalog of genuine GMC Savana 2500 Differential Bearing at unbeatable prices. Every OEM GMC Savana 2500 Differential Bearing comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
GMC Savana 2500 Differential Bearing Parts Questions & Experts Answers
Q: What Tools Are Required to Service and Repair the differential bearings on GMC Savana 2500?
A: You need the following equipment to work on the Differential side bearings: some of the needed tools are the j8092 universal driver handle, the j21784 side bearing installer, the j22888-d side bearing remover kit, the j24430 Differential side bearing installer, the j36597 side bearing puller pilot - 9.25 inch, the j45711 Differential side bearing remover- dana 248, the j45900 Differential side bearing installer - dana you should begin the process by taking off the Differential assembly. When working on the 8.6 inch or 10.5 inch axle with rpo g80, put the Differential assembly in a vise, use the j22888-20a and j8107-4 for the 8.6-inch or j8107-3 for the 10.5 inch, both as shown, and follow up by removing the side bearing with the j22888-20a. After taking the Differential out of the vise, use the j45711 and j36597 as shown on the 9.75 inch axle, and take out the side bearing with the j45711 and a hydraulic press. Take apart the 10.5 inch axle without rpo g80 by taking the Differential side bearing cage and roller bearings off the inner bearing race, then carefully remove the inner bearing race without damaging the Differential case. Protect the Differential case by using the j8107-4 for the 3.6 inch axle, j36597 for the 9.75 lay the bearing on the Differential case, then put the side bearing installer from the j8092 onto the Differential side bearing and lower it in place. For the 8.6 inch axle, use j21784, and if you have 9.75 inch or 10.5 inch with no rpo g80, use j24430 or j45900, but for the 9.75 inch with rpo g80 use dt46725. Use the suitable installer and j8092 to drive the bearing onto the Differential case, and afterwards secure the Differential assembly.