Other Name: Pump Assembly, Power Steering; Pump, Power Steering
Replaces: 20756714, 15234826, 15909824
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2007-2013 GMC Sierra 1500 | Denali, Hybrid, SL, SLE, SLT, WT, XFE | 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2001-2002 GMC Sierra 1500 | Base, C3, Denali, HT, SL, SLE, SLT, WT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
GMC Sierra 1500 Power Steering Pump
Our website offers an extensive catalog of genuine GMC Sierra 1500 Power Steering Pump at unbeatable prices. Every OEM GMC Sierra 1500 Power Steering Pump comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
GMC Sierra 1500 Power Steering Pump Parts Questions & Experts Answers
Q: How to replace the power steering pump on a Parallel Hybrid Truck on GMC Sierra 1500?
A: The Power Steering Pump replacement process starts with disconnecting the energy storage box then placing a drain pan under the parallel hybrid truck. The Power Steering Pump pressure hose requires disconnecting first with unclamping of the retaining clamps (2, 4) that secure power steering return hoses (1, 5) so the hoses can be removed. You should disconnect the upper electrical connector through the locking tab press while pulling out and disconnect the lower connector by moving the locking lever and extracting it. Disconnect the Power Steering Pump from its bracket through unhinging bolts before removing it from the vehicle. Set the Power Steering Pump into the vehicle and fix its bolts into the Power Steering Pump bracket while tightening to 25 nm (18 ft. Lbs.). The Power Steering Pump requires electrical connection from the lower connector before proceeding with upper electrical connector attachment. Connectors for the return hoses (1, 5) need to be restated with clamps. The Power Steering Pump pressure hose requires installation with a torque of 32 nm (24 ft. Lbs.). The owner should use appropriate power steering fluid since this vehicle demands fluid that differs from typical power steering fluid before beginning the power steering system filling and pressure bleeding sequence. The technician must clean residue from spilled fluid on all parts such as hoses and connectors and the pump before reattaching the energy storage box and calibrating the brake pedal position sensor.