Begin the generator replacement process by disconnecting the negative
Battery Cable and the generator electrical connector. Begin by sliding the generator cable boot downward to expose its terminal stud then remove the generator cable nut and detach the cable. The first step requires removal of the
Drive Belt together with the generator bolts before extracting the generator. Place the generator in position then fasten it with the generator bolts until they reach 50 n.m (37 lb ft). First install the Drive Belt before attaching the generator cable by placing the cable on the generator first then tightening the generator cable nut to 9 n.m (80 lb in). Reinstall the boot over the terminal stud before connecting the generator electrical connector and then reconnecting the negative Battery Cable.