The first step when removing the left Exhaust Manifold on an 8.1l engine involves taking out the wheelhouse panel while untwisting
Spark Plug boot half a turn to release it before selectively pulling the boot without touching the wire. The first step involves removing both the
Spark Plug Wires from the spark plugs and
Ignition Coils before extracting the spark plugs. Begin by lifting and supporting the vehicle before you uninstall the bolts and nuts on the left Exhaust Manifold heat shield and remove it from position. Initiate the operation by lowering the Exhaust Manifold to detach all nuts and bolts of the Exhaust Manifold before completely removing it. Remove the old Exhaust Manifold Gasket before cleaning the Exhaust Manifold to inspect its condition. When installing the Exhaust Manifold it requires a new gasket and proper bolting down where the bolt reaches 35 nm (26 ft. Lbs.) and the nuts secure at 16 nm (12 ft. Lbs.). From this position the car should be raised so workers can apply the Exhaust Manifold heat shield and bolt it into place with a torque of 25 nm (18 ft. Lbs.). Put the vehicle back into position before you attach the spark plugs and connect Spark Plug Wires to their respective ignition coils and spark plugs. Install the boot of the Spark Plug Wires completely by pushing against the exposed terminal area but without touching it with the metal heat shield. Finally, reinstall the wheelhouse panel.