Make sure this part fits

GM 12601751
Exhaust Manifold, Passenger Side

2004-2007 GM

Customer Questions & Expert Answers (12)
GM 12601751 Exhaust Manifold, Passenger Side
  • Part Description
    Manifold, Engine Exhaust Manifold
  • Position
    Passenger Side
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2006 Chevrolet Avalanche 2500Base, LS, LT8 Cyl 8.1 L GAS
    2004-2006 Chevrolet Silverado 2500 HDBase, LS, LT, WT8 Cyl 8.1 L GAS
    2007 Chevrolet Silverado 2500 HD ClassicLS, LT, WT8 Cyl 8.1 L GAS
    2004-2006 Chevrolet Silverado 3500Base, LS, LT, WT8 Cyl 8.1 L GAS
    2007 Chevrolet Silverado 3500 ClassicLS, LT, WT8 Cyl 8.1 L GAS
    2004-2006 Chevrolet Suburban 2500LS, LT8 Cyl 8.1 L GAS
    2004-2006 GMC Sierra 2500 HDBase, SL, SLE, SLT, WT8 Cyl 8.1 L GAS
    2007 GMC Sierra 2500 HD ClassicSL, SLE, SLT, WT8 Cyl 8.1 L GAS
    2004-2006 GMC Sierra 3500Base, SL, SLE, SLT, WT8 Cyl 8.1 L GAS
    2007 GMC Sierra 3500 ClassicSL, SLE, SLT, WT8 Cyl 8.1 L GAS
    View More
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 12601751 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 12601751 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the next step after installing the exhaust manifold for the 2006 Chevrolet Avalanche 2500? Posted by Customer
    A:
    Raise the vehicle again to install the exhaust manifold heat shield and secure it with bolts and nuts tightened to 25 Nm (18 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Manifold
    Q:
    What do you do after removing the heat shield for the 2006 Chevrolet Avalanche 2500? Posted by Customer
    A:
    Lower the vehicle and proceed to remove the exhaust manifold bolts and nuts, followed by the manifold itself.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Manifold
    Q:
    What should be ensured about the cylinder head exhaust manifold bolt hole threads for the 2006 Chevrolet Silverado 3500? Posted by Customer
    A:
    They should be clean and free of debris or threadlocking material.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Manifold
    Q:
    How should the exhaust manifold, gasket, and bolts be installed for the 2007 Chevrolet Silverado 3500 Classic? Posted by Customer
    A:
    Install the exhaust manifold, a new gasket, and bolts, tightening the bolts initially to 15 Nm (11 ft. lbs.) starting with the center two bolts and alternating side-to-side toward the outside bolts, followed by a final pass tightening to 25 Nm (18 ft. lbs.) using the same pattern.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Manifold
    Q:
    What is the first step to replace the left side exhaust manifold on 4.8L, 5.3L, and 6.0L engines for the 2007 Chevrolet Silverado 3500 Classic? Posted by Customer
    A:
    First, raise and support the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Manifold
    Q:
    What is the first step to remove the left exhaust manifold for the 2006 Chevrolet Silverado 3500? Posted by Customer
    A:
    Raise and support the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Manifold
    Q:
    How do you release the spark plug boot for the 2006 GMC Sierra 3500? Posted by Customer
    A:
    Twist the spark plug boot one-half turn to release it, then pull only on the boot to avoid damaging the spark plug or wire.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Manifold
    Q:
    If replacing the exhaust manifold, what additional step is required for the 2007 GMC Sierra 3500 Classic? Posted by Customer
    A:
    Take off the exhaust manifold heat shield bolts and the shield.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Manifold
    Q:
    What is the first step in the installation process for the 2004 GMC Yukon XL 2500? Posted by Customer
    A:
    Ensure the heat shield and bolts are reattached to the exhaust manifold and tighten the bolts to 9 Nm (80 inch lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Manifold
    Q:
    What do you do after removing the heat shield for the 2006 GMC Sierra 3500? Posted by Customer
    A:
    Lower the vehicle and proceed to remove the exhaust manifold bolts and nuts, followed by the exhaust manifold itself.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Manifold
    Q:
    What should be done after tightening the catalytic converter nuts for the 2007 GMC Sierra 3500 Classic? Posted by Customer
    A:
    Partially lower the vehicle, reinstall the left wheelhouse liner, and finally remove the Steering Column Anti-Rotation Pin (J 42640) from the steering column lower access hole.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Manifold
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Exhaust Manifold, Passenger Side 12601751 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 12601751 Exhaust Manifold, Passenger Side is available in the market under the name GM Exhaust Manifold. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 12601751 Exhaust Manifold, Passenger Side fits certain Chevrolet Silverado 2500 HD, Silverado 3500, Avalanche 2500 models, as well as GMC Sierra 2500 HD, Sierra 3500, Sierra 2500 HD Classic models.
The original GM component designated by manufacturer part number 12601751 maintains top performance when functioning as the Manifold, Engine Exhaust Manifold unit at its Passenger Side. The component 12601751 is constructed from durable material and its dimensions span 29.8 x 9.4 x 9.2 inches while weighing 14.20 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Manifold. The part 12601751 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.