Other Name: Bulb, Capsule/Headlamp/Fog Lamp; Fog Light Bulbs; Headlight Bulbs; Car Bulbs; High Beam Bulb; Parking Lamp Bulb; Fog Lamp Bulb; Lower Beam Bulb; Bulb
Replaced by: 13503417
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2015-2020 GMC Yukon | Denali, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
Other Name: Bulb, Front Turn Signal Lamp; Turn Signal Bulbs; Tail Light Bulbs; Car Bulbs; Bulbs for Parking, Marker, High Mount, Exterior, License, Turn Signal, Chassis, Courtesy, Headlamp, Tail
Position: Front
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Other Name: Bulb-Stop & Tail & Turn Signal Lamp; Daytime Running Light; Back Up Light; Parking Light; Turn Signal; Tail Light Bulbs.; Tail Lamp Bulb; Backup, Stop, Signal, and Run Lamp Bulbs; Standard Parts.
Replaces: 13502322
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2008-2013 GMC Yukon | Denali Hybrid, Hybrid | 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV)
Other Name: Ballast, Capsule/Headlamp/Fog Lamp; Lighting Control Module; Hid Bulb Ballast; Bulb Ballast; Control Unit; Hid Headlamp Components; Ballast
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2015-2020 GMC Yukon | Denali, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
GMC Yukon Headlight Bulb
Our website offers an extensive catalog of genuine GMC Yukon Headlight Bulb at unbeatable prices. Every OEM GMC Yukon Headlight Bulb comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
GMC Yukon Headlight Bulb Parts Questions & Experts Answers
Q: How to Safely Replace a Headlight and Headlight Bulb (HID) on GMC Yukon?
A: Replacing either the headlamp assembly or headlamp bulb (HID) requires you to extract the front grille followed by removing headlamp retainer pins and then drawing out the headlamp assembly in order to disconnect the electrical connector. Access to the headlamp bulbs becomes possible by first removing the rubber cups. Begin by installing the new bulbs before putting on the rubber cups for installation. The electrical connector ties to the lamp assembly first while replacing the lamp assembly back to its position in the vehicle by using headlamp assembly retainer pins before securing the front grille. Be vigilant about the high voltage and current operations of the high intensity discharge system since opening the ballast or arc tube assembly or probing between electrical connectors causes severe shocks and burns. Maintain safe distances between the arc tube and the headlamp housing as well as bulb shield when uninstalling or installing to prevent any damage from occurring.