Other Name: Tube, Air Conditioner Blower Motor Cooling; A/C Refrigerant Liquid Hose; A/C Hose; Tube, A/C Blower Motor Cooling; Tube, Heater Motor Cooling; Tube, Heater Blower Motor
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2000-2006 GMC Yukon XL 1500 | Denali, SL, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2000-2006 GMC Yukon XL 1500 | Denali, SL, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
| Page 1 of 2 |Next >
1-20 of 22 Results
GMC Yukon XL 1500 A/C Hose
Our website offers an extensive catalog of genuine GMC Yukon XL 1500 A/C Hose at unbeatable prices. Every OEM GMC Yukon XL 1500 A/C Hose comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
Q: How to replace the auxiliary A/C Hose tubes on GMC Yukon XL 1500?
A: The first step for new auxiliary a/c evaporator tube installation requires complete refrigerant recovery from the system. The maintenance professional must disconnect the auxiliary a/c evaporator tubes from their positions both on the condenser tube and accumulator. Obtain access to the clamp by first loosening the wheelhouse and then raise the vehicle. Beginning with the retaining nut and auxiliary a/c evaporator tubes removal from the auxiliary hvac module you must next detach the heater/a/c tubes retaining nut from the stud located at the frame. Exit the auxiliary a/c evaporator tubes from their clamps before taking them outside of the vehicle. Installation requires attaching the auxiliary a/c evaporator tubes to the vehicle after which you must secure them to the clamps. Install the heater/a/c tubes retaining nut to the stud at the frame while tightening it to 7 n.m (62 lb in). Install the auxiliary a/c evaporator tubes (2, 3) together with the retaining nut to the auxiliary hvac module while tightening it to 16 n.m (12 lb ft). Proceed to lower the vehicle then put in the right front wheelhouse. The auxiliary a/c evaporator tubes need installation between the condenser tube and the accumulator while tightening nuts to 16 n.m (12 lb ft). After refrigerant recharge and leak testing the fittings with the halogen leak detector (J 39400-A).