Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2007-2008 GMC Yukon XL 1500 | Denali, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS
GMC Yukon XL 1500 Brake Booster
Our website offers an extensive catalog of genuine GMC Yukon XL 1500 Brake Booster at unbeatable prices. Every OEM GMC Yukon XL 1500 Brake Booster comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
Q: How to replace the vacuum brake booster on GMC Yukon XL 1500?
A: Begin the brake vacuum booster replacement by pressing the parking brake then taking out the Brake Master Cylinder. Take away the vacuum hose from the booster unit and disconnect its electrical connection to the stoplamp switch. Following that you must remove the Pushrod spain and the stoplamp switch itself. Unfasten the Brake Booster mounting nuts while also removing the Pushrod from the brake stud. You can then extract the entire vacuum booster unit. Remove the gasket from the vacuum booster unit. To install the booster begin by placing a new gasket on top and thread in the vacuum booster with its mounting nuts before tightening them to 36 nm (27 ft. Lbs.). Secure the Pushrod end to the brake pedal screw and place back the stoplamp switch before plugging in its wiring. Connect the vacuum hose to the booster last and put back the master cylinder while unbuttoning the parking brake.