Other Name: Bulb, Front Turn Signal Lamp; Turn Signal Bulbs; Tail Light Bulbs; Car Bulbs; Bulbs for Parking, Marker, High Mount, Exterior, License, Turn Signal, Chassis, Courtesy, Headlamp, Tail
Position: Front
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2001-2006 GMC Yukon XL 1500 | Denali | 8 Cyl 6.0 L GAS
Other Name: Bulb, Capsule/Headlamp/Fog Lamp; Fog Light Bulbs; Headlight Bulbs; Car Bulbs; High Beam Bulb; Parking Lamp Bulb; Fog Lamp Bulb; Lower Beam Bulb; Bulb
Replaced by: 13503417
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2007-2009 GMC Yukon XL 1500 | SLE, SLT | 8 Cyl 6.0 L GAS
Other Name: Bulb; Headlight Bulbs; Car Bulbs; Headlamp Bulb; Lower Beam Bulb
Replaces: 12335923, 25735603
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2007-2009 GMC Yukon XL 1500 | SLE, SLT | 8 Cyl 6.0 L GAS
GMC Yukon XL 1500 Headlight Bulb
Our website offers an extensive catalog of genuine GMC Yukon XL 1500 Headlight Bulb at unbeatable prices. Every OEM GMC Yukon XL 1500 Headlight Bulb comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
Q: How to replace the front headlight bulb on GMC Yukon XL 1500?
A: The bulb replacement process starts with turning off the lamp switch while permitting the bulb to cool down. Eye protection should always be worn while you should touch the bulb base only with care because contact with glass or dirt or water must be avoided. After contact with moisture or touching, it is imperative to use alcohol or a suitable degreaser to clean the bulb before wiping it dry. Begin by turning the hood open to access the headlamp retainer pins before properly rotating them before bulb removal. To get to the electrical connector a person should pull out the headlamp assembly and then disconnect the connector. Twist the bulb to the left side in order to remove it. Replacement of high beam bulbs must use another high beam bulb as well as replacement of low beam bulbs with another low beam bulb (with gray tips and yellow gaskets). Illuminate the new bulb by setting its direction clockwise while you secure it in position followed by connector reattachment before you secure the headlamp assembly. Secure the headlamp retainer pins last after their installation.