Make sure this part fits

GM 12572042
Drive Plate

2004-2009 GM

Customer Questions & Expert Answers (17)
GM 12572042 Drive Plate
GM 12572042 Drive Plate
  • Part Description
    Plate, Engine Crankshaft
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number12572042
    Part DescriptionPlate, Engine Crankshaft
    Item Dimensions12.7 x 12.7 x 1.2 inches
    Item Weight6.10 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerGeneral Motors
    SKU12572042
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2005-2008 Buick LaCrosseCXS6 Cyl 3.6 L GAS
    2004-2006 Buick RendezvousCX, CXL, CXL Plus, Ultra6 Cyl 3.6 L GAS
    2004-2007 Cadillac CTSBase6 Cyl 2.8 L GAS, 6 Cyl 3.6 L GAS
    2004-2009 Cadillac SRXBase6 Cyl 3.6 L GAS
    2005-2007 Cadillac STSBase6 Cyl 3.6 L GAS
    2008-2009 Pontiac G8Base, GT, GXP6 Cyl 3.6 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS
  • Customer Questions & Expert Answers

    Q:
    Is this 12572042 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 12572042 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the engine flexplate or flywheel on Buick LaCrosse? Posted by Customer
    A:
    The repair process of an engine flexplate or Flywheel requires removing the transmission followed by the engine Flywheel bolt removal and the Flywheel detachment. Check and clean the Flywheel before examining the teeth for damage as you should replace the Starter unit when you discover severe wear or damage on the Starter drive components l26 or ly7. Reattach the engine Flywheel to its position before putting back the transmission.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the engine flywheel on Cadillac SRX? Posted by Customer
    A:
    You should first take out the transmission by using the right procedures for any lh2 or ly7 models. After that, unscrew the bolts and take out the engine Flywheel. After removing the Flywheel, clean it and observe it for any signs of wear on the teeth. If any of the teeth show signs of too much wear, make sure to check the Starter and replace it if it is damaged. After checking the new engine Flywheel, put it in place and then bolt the transmission back on. Using the right tools and following the given steps ensures that all is done properly.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the next step after inspecting the flywheel for the 2007 Buick LaCrosse? Posted by Customer
    A:
    Install the engine flywheel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Flywheel
    Q:
    What tools are required to service and repair the flex plate and replace the engine flywheel for the 2006 Cadillac STS? Posted by Customer
    A:
    Torque Angle Meter (J 45059) and Flywheel Turner (Snap-On A144A).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Flywheel
    Q:
    What should be done with the flywheel after removal for the 2005 Buick LaCrosse? Posted by Customer
    A:
    Clean and inspect the flywheel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Flywheel
    Q:
    What maintenance should be performed on the engine flywheel bolts for the 2005 Buick Rendezvous? Posted by Customer
    A:
    Clean the engine flywheel bolt threads and bolt holes.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Flywheel
    Q:
    How should the flywheel be installed for the 2006 Buick Rendezvous? Posted by Customer
    A:
    Position the flywheel and install the bolts until snug.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Flywheel
    Q:
    What is the final step after inspecting the flywheel for the 2008 Buick LaCrosse? Posted by Customer
    A:
    Install the engine flywheel and then reinstall the transmission.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Flywheel
    Q:
    What is the final step in the installation process for the 2007 Cadillac CTS? Posted by Customer
    A:
    Install the automatic transmission if equipped.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Flywheel
    Q:
    What should you do after removing the flywheel for the 2006 Cadillac SRX? Posted by Customer
    A:
    Clean and inspect the flywheel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Flywheel
    Q:
    How should the engine flywheel bolts be installed initially for the 2005 Cadillac STS? Posted by Customer
    A:
    Install them finger tight.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Flywheel
    Q:
    What tool is used to counterhold the crankshaft for the 2004 Cadillac CTS? Posted by Customer
    A:
    The Crank Hub TORX® Socket (J42098) is used to counterhold the crankshaft.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Flywheel
    Q:
    What is the first step to replace the engine flywheel for the 2008 Cadillac SRX? Posted by Customer
    A:
    First, remove the transmission.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Flywheel
    Q:
    What is the first step to service and repair the flex plate for the 2007 Cadillac STS? Posted by Customer
    A:
    Begin by removing the transmission.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Flywheel
    Q:
    How should the engine flywheel bolts be installed initially for the 2007 Cadillac SRX? Posted by Customer
    A:
    Install the engine flywheel bolts finger tight, using the Snap-On(TM) A144A Flywheel Turner (A144A) to prevent rotation.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Flywheel
    Q:
    What should be checked if the flywheel teeth are damaged for the 2005 Cadillac SRX? Posted by Customer
    A:
    Check the starter for proper operation.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Flywheel
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 12572042, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 12572042 Drive Plate. It is sometimes referred to as GM Flywheel. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 12572042 Drive Plate. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Cadillac parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery