How to replace the engine flywheel on Cadillac CTS?

Starting the engine Flywheel replacement process demands removing the transmission from the system first. The crank hub torx® socket (J42098) enables users to counterhold the Crankshaft while they remove the Flywheel bolts before discarding all bolts. Begin the process by removing the engine Flywheel combined with its retainer from the Crankshaft before proceeding with cleaning operations on the rear Crankshaft flange and checking the engine Flywheel condition. Position the engine Flywheel and retainer onto the Crankshaft while using thread retaining compound on gm p/n 12345493 (Canadian P/N 10953488) new Flywheel bolts. The crank hub torx® socket (J42098) should be used to counterhold the Crankshaft for the installation of new Flywheel bolts which need to be tightened to 65 nm (48 ft. Lbs.). The torque/angle meter (J36660-A) must be used when rotating Flywheel bolts by starting at 30 degrees then proceeding to another 15-degree twist for the last step. Finally, reinstall the transmission.

How to replace the Flywheel in the automatic transmission on Cadillac Escalade?

The first step to replace an automatic transmission flex plate requires removal of the automatic transmission while documenting the direction and position of the engine Flywheel before taking it out. First unfasten the bolts securing the Flywheel and after that unmount the Flywheel. Two m11x1.5 mm bolts must be installed into the threaded holes on the spacer before rotating them clockwise to separate it from the Crankshaft's rear end. First position the spacer onto the Crankshaft rear then use longer Flywheel bolts when the installation requires a Flywheel spacer. Place the Flywheel on the Crankshaft before inserting bolts and adding threadlock to the Flywheel bolt threads according to the specified part number of sealers and lubricants. Jane should execute Flywheel bolt installation by following this method - starting with 20 n.m (15 lb ft), then moving to 50 n.m (37 lb ft) and culminating in 100 n.m (74 lb ft). The automatic transmission installation should follow these completion steps.

How to replace the engine flywheel on Cadillac XLR?

The procedure for replacing an engine Flywheel requires users to start by taking out the powertrain then proceeding to remove the driveline support assembly and the Intake Manifold. First put on the en 46326 (EN 46326) Flywheel holding tool before unscrewing the engine Flywheel bolts to extract the Flywheel and reinforcement. The engine Flywheel requires thorough cleaning while you must also perform an inspection. Sealant should be applied to the Flywheel mounting bolts which need to be installed after positioning the Flywheel along with reinforcement onto the Crankshaft. Initial engagement of the bolts should come to 30 n.m torque before performing a second torque phase that tightens an additional 50 degrees with the j 45059 (J 45059) angle meter. Finish the procedure by eliminating the en 46326 (EN 46326) component and then install the Intake Manifold followed by the driveline support assembly and the powertrain.

OEM Cadillac Flywheel

Clutch Flywheel

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

47 Flywheels found

View related parts
Cadillac Flywheel
Part Number: 12575412
$464.32 MSRP: $733.57
You Save: $269.25 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Flywheel, Engine Crankshaft
Fits the following Cadillac Models:
- CTS | 2005-2009 | Base, V | 6 Cyl 2.8 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS
View related parts
Cadillac Drive Plate
Part Number: 24410097
$79.33 MSRP: $124.26
You Save: $44.93 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Plate, Engine Crankshaft
Fits the following Cadillac Models:
- CTS | 2003-2004 | Base, Luxury, Luxury Sport | 6 Cyl 3.2 L GAS
View related parts
Cadillac Drive Plate
Part Number: 12621399
$84.92 MSRP: $145.86
You Save: $60.94 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Replaced by: 19260102
Fits the following Cadillac Models:
- Escalade | 2002-2006 | Base | 8 Cyl 6.0 L GAS
- Escalade ESV | 2003-2006 | Base | 8 Cyl 6.0 L GAS
- Escalade EXT | 2002-2006 | Base | 8 Cyl 6.0 L GAS
View More
View related parts
Cadillac Drive Plate
Part Number: 12699085
$53.09 MSRP: $83.15
You Save: $30.06 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Plate, Engine Crankshaft
- Replaces: 12680545, 12648842
Fits the following Cadillac Models:
- ATS | 2016-2018 | Luxury, Performance, Premium, Premium Luxury, Premium Performance, V | 6 Cyl 3.6 L GAS
- CT5 | 2020-2022 | Premium Luxury, V | 6 Cyl 3.0 L GAS
- CT6 | 2016-2020 | Base, Luxury, Platinum, Premium Luxury, Sport, V | 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 4.2 L GAS
- CTS | 2016-2019 | Luxury, Performance, Premium, Premium Luxury | 6 Cyl 3.6 L GAS
- XT5 | 2017-2023 | Base, Luxury, Platinum, Premium Luxury, Sport | 6 Cyl 3.6 L GAS
- XT6 | 2020-2023 | Premium Luxury, Sport | 6 Cyl 3.6 L GAS
View More
View related parts
Cadillac Drive Plate
Part Number: 12636325
$70.48 MSRP: $110.40
You Save: $39.92 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Plate, Engine Crankshaft
- Replaces: 12622564
Fits the following Cadillac Models:
- CTS | 2009-2010 | V | 8 Cyl 6.2 L GAS
View related parts
Cadillac Flywheel
Part Number: 24240678
$740.17 MSRP: $1169.35
You Save: $429.18 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Flywheel, Engine Crankshaft
Fits the following Cadillac Models:
- CTS | 2015, 2009-2010 | V | 8 Cyl 6.2 L GAS
View related parts
Cadillac Drive Plate
Part Number: 12661237
$99.79 MSRP: $156.32
You Save: $56.53 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Plate, Engine Crankshaft
Fits the following Cadillac Models:
- ATS | 2016-2019 | V | 6 Cyl 3.6 L GAS
- CT4 | 2022 | V Blackwing | 6 Cyl 3.6 L GAS
View related parts
Cadillac Drive Plate
Part Number: 12652168
$80.52 MSRP: $126.14
You Save: $45.62 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Plate, Engine Crankshaft
Fits the following Cadillac Models:
- XTS | 2014-2019 | Vsport Platinum, Vsport Premium, Vsport Premium Luxury | 6 Cyl 3.6 L GAS
View related parts
Cadillac Flywheel
Part Number: 24279978
$1598.10 MSRP: $2056.77
You Save: $458.67 (23%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Flywheel, Engine Crankshaft
- Replaces: 24265374
Fits the following Cadillac Models:
- ATS | 2016-2019 | V | 6 Cyl 3.6 L GAS
- CT4 | 2022 | Luxury, Premium Luxury, Sport, V, V Blackwing | 4 Cyl 2.0 L GAS, 4 Cyl 2.7 L GAS, 6 Cyl 3.6 L GAS
View related parts
Cadillac Drive Plate
Part Number: 3544671
$97.14 MSRP: $136.33
You Save: $39.19 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Flywheel Assembly; Flywheel; Flywheel, Engine Crankshaft
Fits the following Cadillac Models:
- Allante | 1993 | Base, Indianapolis 500 Pace Car, Value Leader | 8 Cyl 4.6 L GAS
- DeVille | 1994-2002 | Base, Concours, d'Elegance, DHS, DTS | 8 Cyl 4.6 L GAS
- Eldorado | 1993-2002 | Base, ESC, ETC, Sport, Touring | 8 Cyl 4.6 L GAS
- Seville | 1993-2002 | SLS, STS | 8 Cyl 4.6 L GAS
View More
View related parts
Cadillac Drive Plate
Part Number: 12572042
Product Specifications
- Other Name: Plate, Engine Crankshaft
Fits the following Cadillac Models:
- CTS | 2004-2007 | Base | 6 Cyl 2.8 L GAS, 6 Cyl 3.6 L GAS
- SRX | 2004-2009 | Base | 6 Cyl 3.6 L GAS
- STS | 2005-2007 | Base | 6 Cyl 3.6 L GAS
View More
View related parts
Cadillac Drive Plate
Part Number: 12554824
Product Specifications
- Other Name: Flywheel, Engine Crankshaft; Flywheel
- Replaces: 14088767
Fits the following Cadillac Models:
- Escalade | 1999-2000 | Base | 8 Cyl 5.7 L GAS
View related parts
Cadillac Drive Plate
Part Number: 22500808
Product Specifications
- Other Name: Flywheel; Flywheel, Engine Crankshaft
Fits the following Cadillac Models:
- DeVille | 1984 | Base, Cabriolet, d'Elegance | 8 Cyl 5.7 L DIESEL
- Eldorado | 1984-1985 | Base, Cabriolet, Touring | 8 Cyl 5.7 L DIESEL
- Fleetwood | 1984 | Brougham, Brougham d'Elegance | 8 Cyl 5.7 L DIESEL
- Seville | 1984-1985 | Base, Elegante | 8 Cyl 5.7 L DIESEL
View More
View related parts
Cadillac Drive Plate
Part Number: 12582606
Product Specifications
- Other Name: Flywheel, Engine Crankshaft
Fits the following Cadillac Models:
- SRX | 2006-2009 | Base | 8 Cyl 4.6 L GAS
- STS | 2005-2010 | Base, Platinum, V | 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
View related parts
Cadillac Drive Plate
Part Number: 22520094
Product Specifications
- Other Name: Disk; Flywheel, Engine Crankshaft
Fits the following Cadillac Models:
- DeVille | 1985 | Base, Cabriolet, d'Elegance | 6 Cyl 4.3 L DIESEL
- Fleetwood | 1985 | 75, 75 Formal, Base, d'Elegance | 6 Cyl 4.3 L DIESEL
View related parts
Cadillac Drive Plate
Part Number: 25512349
Product Specifications
- Other Name: Flywheel
Fits the following Cadillac Models:
- Eldorado | 1984 | Base, Cabriolet, Touring | 8 Cyl 5.7 L DIESEL
View related parts
Cadillac Drive Plate
Part Number: 19117204
Product Specifications
- Other Name: Plate Assembly, Automatic Transmission Flexible; Rotor Plate; Plate, Engine Crankshaft
- Replaces: 12569647
Fits the following Cadillac Models:
- Escalade | 2004-2006 | Base | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
- Escalade ESV | 2004-2006 | Base | 8 Cyl 6.0 L GAS
- Escalade EXT | 2004-2006 | Base | 8 Cyl 6.0 L GAS
View More
View related parts
Cadillac Drive Plate
Part Number: 12582608
Product Specifications
- Other Name: Flywheel, Engine Crankshaft
Fits the following Cadillac Models:
- DTS | 2006-2011 | Base, Livery, Luxury, Platinum, Premium | 8 Cyl 4.6 L GAS
View related parts
Cadillac Drive Plate
Part Number: 12597524
Product Specifications
- Other Name: Plate, Engine Crankshaft
Fits the following Cadillac Models:
- Escalade | 2009-2013 | Hybrid, Hybrid Platinum | 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV)
View related parts
Cadillac Drive Plate
Part Number: 14085471
Product Specifications
- Other Name: Flywheel; Flywheel, Engine Crankshaft
Fits the following Cadillac Models:
- Cimarron | 1985-1986 | Base, d'Oro | 6 Cyl 2.8 L GAS

| Page 1 of 3 |Next >

1-20 of 47 Results

Cadillac Flywheel Parts Questions & Experts Answers

Drive Plate
24410097
Q: How to replace the engine flywheel on Cadillac CTS?
A: Starting the engine Flywheel replacement process demands removing the transmission from the system first. The crank hub torx® socket (J42098) enables users to counterhold the Crankshaft while they remove the Flywheel bolts before discarding all bolts. Begin the process by removing the engine Flywheel combined with its retainer from the Crankshaft before proceeding with cleaning operations on the rear Crankshaft flange and checking the engine Flywheel condition. Position the engine Flywheel and retainer onto the Crankshaft while using thread retaining compound on gm p/n 12345493 (Canadian P/N 10953488) new Flywheel bolts. The crank hub torx® socket (J42098) should be used to counterhold the Crankshaft for the installation of new Flywheel bolts which need to be tightened to 65 nm (48 ft. Lbs.). The torque/angle meter (J36660-A) must be used when rotating Flywheel bolts by starting at 30 degrees then proceeding to another 15-degree twist for the last step. Finally, reinstall the transmission.
Drive Plate
12654640
Q: How to replace the Flywheel in the automatic transmission on Cadillac Escalade?
A: The first step to replace an automatic transmission flex plate requires removal of the automatic transmission while documenting the direction and position of the engine Flywheel before taking it out. First unfasten the bolts securing the Flywheel and after that unmount the Flywheel. Two m11x1.5 mm bolts must be installed into the threaded holes on the spacer before rotating them clockwise to separate it from the Crankshaft's rear end. First position the spacer onto the Crankshaft rear then use longer Flywheel bolts when the installation requires a Flywheel spacer. Place the Flywheel on the Crankshaft before inserting bolts and adding threadlock to the Flywheel bolt threads according to the specified part number of sealers and lubricants. Jane should execute Flywheel bolt installation by following this method - starting with 20 n.m (15 lb ft), then moving to 50 n.m (37 lb ft) and culminating in 100 n.m (74 lb ft). The automatic transmission installation should follow these completion steps.
Drive Plate
12582607
Q: How to replace the engine flywheel on Cadillac XLR?
A: The procedure for replacing an engine Flywheel requires users to start by taking out the powertrain then proceeding to remove the driveline support assembly and the Intake Manifold. First put on the en 46326 (EN 46326) Flywheel holding tool before unscrewing the engine Flywheel bolts to extract the Flywheel and reinforcement. The engine Flywheel requires thorough cleaning while you must also perform an inspection. Sealant should be applied to the Flywheel mounting bolts which need to be installed after positioning the Flywheel along with reinforcement onto the Crankshaft. Initial engagement of the bolts should come to 30 n.m torque before performing a second torque phase that tightens an additional 50 degrees with the j 45059 (J 45059) angle meter. Finish the procedure by eliminating the en 46326 (EN 46326) component and then install the Intake Manifold followed by the driveline support assembly and the powertrain.