Make sure this part fits

GM 88964338
Motor Mount Bracket

2002-2009 GM

Customer Questions & Expert Answers (19)
GM 88964338 Motor Mount Bracket
  • Part Description
    Bracket, Engine Mounting; Engine Mount Bracket; Motor Mount
  • Replaces
    15079401
  • Manufacturer
    General Motors
Make sure this part fits
$92.01 MSRP: $144.12
You Save: $52.11 (37%)
Ships in 1-3 Business Days
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2007 Buick RainierCXL, CXL Plus6 Cyl 4.2 L GAS
    2002-2009 Chevrolet TrailblazerBase, LS, LT, LTZ, North Face6 Cyl 4.2 L GAS
    2002-2006 Chevrolet Trailblazer EXTLS, LT, North Face6 Cyl 4.2 L GAS
    2002-2009 GMC EnvoySLE, SLT6 Cyl 4.2 L GAS
    2002-2006 GMC Envoy XLSLE, SLT6 Cyl 4.2 L GAS
    2004-2005 GMC Envoy XUVSLE, SLT6 Cyl 4.2 L GAS
    2002-2004 Oldsmobile BravadaBase6 Cyl 4.2 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is 88964338 compatible with my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 88964338 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the next step after raising to remove the jack for the 2004 Buick Rainier? Posted by Customer
    A:
    Install the engine protection shield and secure it with bolts.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount Bracket
    Q:
    What should be done after raising and removing the jack for the 2007 Buick Rainier? Posted by Customer
    A:
    Install the engine protection shield and secure it with bolts.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What should be done after installing the left engine mount onto the bracket for the 2002 Chevrolet Trailblazer? Posted by Customer
    A:
    Lower the engine onto the engine mounts and install the right and left upper engine mount nuts, tightening them to 70 Nm (52 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What should be removed after disconnecting the water pump pulley for the 2003 Chevrolet Trailblazer? Posted by Customer
    A:
    Remove the MAP sensor electrical connector and the retainer, followed by the MAP sensor.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    How do you install the right engine mount bracket for the 2002 Chevrolet Trailblazer? Posted by Customer
    A:
    Install the right engine mount bracket and secure it with bolts, tightening to 50 Nm (37 ft. lbs.), then install the right engine mount.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount Bracket
    Q:
    What should be done if the left frame engine mount bracket needs to be removed for the 2008 Chevrolet Trailblazer? Posted by Customer
    A:
    Remove the left frame engine mount bracket bolts and the bracket.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What should be done after tightening the upper engine mount nuts for the 2005 Chevrolet Trailblazer? Posted by Customer
    A:
    Raise the vehicle and remove the floor jack.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount Bracket
    Q:
    How do you secure the engine mounts after lowering the engine for the 2003 GMC Envoy? Posted by Customer
    A:
    Lower the engine onto the engine mounts and install the right and left upper engine mount nuts, tightening them to 70 Nm (52 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What should be done after tightening the lower engine mount nuts for the 2006 GMC Envoy? Posted by Customer
    A:
    Lower the vehicle, reinstall the right shock module, then the MAP sensor and its retainer along with the electrical connector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount Bracket
    Q:
    What should be done if the left frame engine mount bracket needs to be removed for the 2009 Chevrolet Trailblazer? Posted by Customer
    A:
    Remove the left frame engine mount bracket bolts and the bracket.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What is the procedure for installing the left engine mount bracket for the 2006 GMC Envoy? Posted by Customer
    A:
    Install the left engine mount bracket and secure it with bolts, tightening them to 50 Nm (37 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount Bracket
    Q:
    What is the next step after removing the cooling fan clutch for the 2008 Chevrolet Trailblazer? Posted by Customer
    A:
    Remove the manifold absolute pressure (MAP) sensor electrical connector and retainer, followed by the MAP sensor.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount Bracket
    Q:
    What is the first step to replace the left engine mount for the 2004 GMC Envoy? Posted by Customer
    A:
    Raise and support the vehicle, then remove the wheel and tire assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What is the next step after raising for the 2007 GMC Envoy? Posted by Customer
    A:
    Remove the right and left lower engine mount nuts.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount Bracket
    Q:
    How should the engine be positioned during the replacement for the 2004 GMC Envoy? Posted by Customer
    A:
    Raise the engine with the jack stand, causing it to tilt to one side.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What should you do after placing the block of wood for the 2002 GMC Envoy? Posted by Customer
    A:
    Raise the jack until the wooden block contacts the engine oil pan, then raise the engine to place slight tension on the rubber cushion while observing both mounts.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    How should the engine mount be installed for the 2009 GMC Envoy? Posted by Customer
    A:
    Install the engine mount to the upper engine mount bracket and tighten the engine mount nuts to 50 Nm (37 lb ft), then install the engine mount to the engine and tighten the engine mount bolts to 50 Nm (37 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What should be done if the right frame engine mount bracket needs to be removed for the 2009 GMC Envoy? Posted by Customer
    A:
    Remove the right frame engine mount bracket bolts and the bracket itself.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount Bracket
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Motor Mount Bracket 88964338 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 88964338 Motor Mount Bracket is available in the market under the name GM Engine Mount, Engine Mount Bracket. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 88964338 Motor Mount Bracket fits certain Chevrolet Trailblazer, Trailblazer EXT models, as well as GMC Envoy, Envoy XL, Envoy XUV. Additionally, it is compatible with Buick Rainier and Oldsmobile Bravada models.
The original GM component designated by manufacturer part number 88964338 maintains top performance when functioning as the Bracket, Engine Mounting; Engine Mount Bracket; Motor Mount unit. The component 88964338 is constructed from durable material and its dimensions span 8.2 x 7.7 x 7.7 inches while weighing 6.50 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. The part 88964338 has available replacement options 15079401. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.